ISO and For Trade thread parts 2 and 3.
#8401
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
Amazingly enough, my Facebook page is still old-school. I won't know my way around once they shift me over to the "new and improved" Timeline version.
DD
#8402
Senior Member
I don't get to philly often at all. I live on the other end of the state. I konw all the folks from Via from seeing them at Bike swaps. Good batch of guys with lots of experience and knowledge under their belts.
#8403
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,332
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
Quoted: 786 Post(s)
Liked 520 Times
in
281 Posts
ISO: right side bar-end shifters or pods. Either Shimano SIS (just the pod or a 7 or 8 speed unit), or a Dia Compe Silver shifter or pod would be fine. I have a spare left side Silver shifter and other bar-end shifter odds and ends.
__________________
The man who dies with the most toys…is dead. - Rootboy
The man who dies with the most toys…is dead. - Rootboy
#8404
Member
Join Date: Mar 2011
Posts: 37
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Still on the lookout for one or a pair of these. still don't have PM's yet, so hit me back at e.l.hsia at gmail dot com.
#8405
Senior Member
probably a long shot on C&V but...
ISO. Shimano Dura Ace 7700 front derailleur, braze on, nice condition
HAVE. Shimano Dura Ace 7700 front derailleur, clamp on, nice condition... and lots of other goodies
ISO. Shimano Dura Ace 7700 front derailleur, braze on, nice condition
HAVE. Shimano Dura Ace 7700 front derailleur, clamp on, nice condition... and lots of other goodies
#8406
Wherever I may roam....
Join Date: Oct 2009
Location: Topton Pa
Posts: 1,853
Bikes: A few bikes
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#8407
Member
Join Date: Mar 2011
Posts: 37
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
haha, no worries. if you stumble across them, hit me back. in the meantime, the hunt continues.
#8408
Senior Member
Join Date: Aug 2010
Location: Scottsdale, AZ
Posts: 159
Bikes: 3Rensho Super Record Export, Zunow Z-1, Andy Gilmour Breakaway, Sycip 26er
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Edit* here we go, I'm pretty sure it's from a 7410, and I've only got one.
On that note, I myself am looking for a campy super record crank bolt, just one!
Last edited by irvri; 04-26-12 at 01:31 AM.
#8409
Get off my lawn!
Join Date: Nov 2010
Location: The Garden State
Posts: 6,031
Bikes: 1917 Loomis, 1923 Rudge, 1930 Hercules Renown, 1947 Mclean, 1948 JA Holland, 1955 Hetchins, 1957 Carlton Flyer, 1962 Raleigh Sport, 1978&81 Raleigh Gomp GS', 2010 Raliegh Clubman
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 93 Post(s)
Likes: 0
Liked 98 Times
in
48 Posts
No longer ISO white Blumels club Specials in good order no cracks or chips. PM me if you have a set to sell.
Thanks everyone!! Had a great day Friday: got together with a great group of C&V guys, great ride, saw a Bald Eagle, rode over a covered bridge, passed noglider on a climb (he was bonking but still a victory for me!) great post ride grub plus I got the Bluemels to complete by Mclean build (thanks nlerner) What a great day!!
Thanks everyone!! Had a great day Friday: got together with a great group of C&V guys, great ride, saw a Bald Eagle, rode over a covered bridge, passed noglider on a climb (he was bonking but still a victory for me!) great post ride grub plus I got the Bluemels to complete by Mclean build (thanks nlerner) What a great day!!
Last edited by Velognome; 05-05-12 at 05:25 PM.
#8410
Wrench Savant
ISO: Full 1st generation Campagnolo Chorus group in reasonably good conditio
Have: Name your desire. Hoepfully it won't be too painful.
Have: Name your desire. Hoepfully it won't be too painful.
#8411
Too many bikes
Join Date: Apr 2006
Location: Boston MA
Posts: 1,257
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#8412
Senior Member
Join Date: Jul 2011
Location: Huntington beach
Posts: 374
Bikes: Fondriest, 86 Team Fuji
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I sure hope MTB stuff is welcome here.
Have - 94 GT Zaskar full Deore XT with Mavic 230 SBP's and upgraded shifters.
ISO - A road bike, 54-56cm. I want to do a local trade, PM me.
Have - 94 GT Zaskar full Deore XT with Mavic 230 SBP's and upgraded shifters.
ISO - A road bike, 54-56cm. I want to do a local trade, PM me.
#8413
vintage motor
Join Date: Sep 2008
Location: Tepic, Nayarit, Mexico
Posts: 1,595
Bikes: 48 Automoto, 49 Stallard, 50 Rotrax, 62 Jack Taylor, 67 Atala, 68 Lejeune, 72-74-75 Motobecanes, 73 RIH, 71 Zieleman, 74 Raleigh, 78 Windsor, 83 Messina (Villata), 84 Brazzo (Losa), 85 Davidson, 90 Diamondback, 92 Kestrel
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 164 Post(s)
Likes: 0
Liked 102 Times
in
79 Posts
ISO:
French stem, 120mm or so, recessed bolts
French bars, 40-42cm c-c
HAVE:
Cinelli 2-A track stem, 100mm, 65° angle
Cinelli 1-R stem, 100mm
Cinelli 64 bars 42cm
3ttt bars 38cm
other stuff
French stem, 120mm or so, recessed bolts
French bars, 40-42cm c-c
HAVE:
Cinelli 2-A track stem, 100mm, 65° angle
Cinelli 1-R stem, 100mm
Cinelli 64 bars 42cm
3ttt bars 38cm
other stuff
Last edited by kroozer; 04-27-12 at 09:42 AM.
#8414
Wherever I may roam....
Join Date: Oct 2009
Location: Topton Pa
Posts: 1,853
Bikes: A few bikes
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#8415
Member
Join Date: Mar 2011
Posts: 37
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
you are my new best friend. I don't have spare SR bolt unfortunately. Are you looking for anything else? Hit me back at e.l.hsia at gmail dot com. I don't have PM's yet, so that will probably be the best way to interact.
#8416
自転車整備士
Join Date: Apr 2012
Location: Denver, Colorado USA
Posts: 885
Bikes: '86 Moots Mountaineer, '94 Salsa Ala Carte, '94 S-Works FSR, 1983 Trek 600 & 620
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
A clarification...
wrk101 is actually the person who might have a selection of chain rings; I was looking for some particular ones and used one of his photos in my reply.
I have come up with a couple of items that would be nice to find besides the Mighty Tour LH crank arm (171mm) & Biopace chain rings:
-- Old school Dura Ace EX Ft. hub in either 32° or 36°, but the one with the 'bulge' in the middle of the hub shell with the Gold band
-- Deore XT (Deerhead) R. Derailleur with "Superplate" (I know... dream on!)
-- Oakley M-Frame lenses in good condition, specifically the VR-28 smoke colored lens or clear, in the "Heater" shape
-- Musette bags
I have:
-- Mavic 501 Ft. Hub 28° no skewer
-- Mavic Open 4 CD 28° rim; straight, with minimal brake wea
-- 4 sets of Deore LX M 565 Low Profile Cantilever Brake Arms w/ OEM cartridge pads
-- 1 set of 600 Arabesque Brake Arches w/ original pads F/R
-- 1994 PETALUMA Salsa Alá Carte frame set with CUSTOM Chili Pepper Paint. 39cm c-c frame, 50cm TT c-c.
Comes with Rock Shox Mag Ti SL Fork and Syncros 1" threadless stem.
EDIT 4/27: A photo of the Salsa...
Anything else? Go right ahead and ask; a distinct possibility.
Alan
wrk101 is actually the person who might have a selection of chain rings; I was looking for some particular ones and used one of his photos in my reply.
I have come up with a couple of items that would be nice to find besides the Mighty Tour LH crank arm (171mm) & Biopace chain rings:
-- Old school Dura Ace EX Ft. hub in either 32° or 36°, but the one with the 'bulge' in the middle of the hub shell with the Gold band
-- Deore XT (Deerhead) R. Derailleur with "Superplate" (I know... dream on!)
-- Oakley M-Frame lenses in good condition, specifically the VR-28 smoke colored lens or clear, in the "Heater" shape
-- Musette bags
I have:
-- Mavic 501 Ft. Hub 28° no skewer
-- Mavic Open 4 CD 28° rim; straight, with minimal brake wea
-- 4 sets of Deore LX M 565 Low Profile Cantilever Brake Arms w/ OEM cartridge pads
-- 1 set of 600 Arabesque Brake Arches w/ original pads F/R
-- 1994 PETALUMA Salsa Alá Carte frame set with CUSTOM Chili Pepper Paint. 39cm c-c frame, 50cm TT c-c.
Comes with Rock Shox Mag Ti SL Fork and Syncros 1" threadless stem.
EDIT 4/27: A photo of the Salsa...
Anything else? Go right ahead and ask; a distinct possibility.
Alan
Last edited by oldskoolwrench; 04-27-12 at 02:55 PM. Reason: added photos...
#8417
Junior Member
Join Date: Nov 2011
Posts: 18
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Chorus parts sold pending Jake Hello, I have some early chorus parts, FD,RD,shifters,170 crankset,brake l evers w/white hoods, maybe more.Sorry no monoplaner calipers.Jake
Last edited by jake coye; 04-30-12 at 01:35 PM. Reason: sold
#8418
Senior Member
Join Date: Dec 2008
Posts: 659
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Anyone have the housing stops for Dura Ace 7401/2 aero brake levers? The little bits that go in the back of the levers for the cable housing to sit in? Seems like all I have are Dia Compe. Even if you know where to buy these parts or what they look like that would be a big help.
#8419
Full Member
Join Date: Feb 2011
Location: Minneapolis
Posts: 253
Bikes: 1988 Specialized Rockhopper Comp, 2012 Goodrich Randoneuse, 2016 A-Train, 2022 Wilde Dream Engine, 2022 Salsa Mukluk
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 61 Post(s)
Liked 88 Times
in
36 Posts
Hi I am looking for a Nitto Technomic 100mm stem and a Suntour Mountech II or any other long-cage touring Suntour rear derailleur.
I have a wide assortment of parts, shimano 600 brake calipers, front derailleur, crankset, and 105 downtube shifters from the late 80s. I also have a lot of XTR m900 parts too.
Thanks!
I have a wide assortment of parts, shimano 600 brake calipers, front derailleur, crankset, and 105 downtube shifters from the late 80s. I also have a lot of XTR m900 parts too.
Thanks!
#8420
Senior Member
Join Date: Mar 2012
Location: St. Louis
Posts: 155
Bikes: 1990 Diamondback Master TG, 2015 All City macho man disc, 2015 Trek X-caliber 7, 1989 concorde pdm team edition
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I am looking for a mavic open pro rim laced to a Campy front hub. Would be ideal if the rim is black. I have a Campy front hub laced to a ma40 rim that I would be willing to trade.
I am also looking for Campy skewers and a 8 speed era record crankset.
I am also looking for Campy skewers and a 8 speed era record crankset.
#8421
Senior Member
Join Date: Jun 2009
Location: Chicago, the leafy NW side
Posts: 2,479
Bikes: 1974 Motobecane Grand Record, 1987 Miyata Pro, 1988 Bob Jackson Lady Mixte (wife's), others in the family
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 125 Post(s)
Liked 155 Times
in
79 Posts
ISO: dark red/maroon cable housing; I could use several feet I think. In the last month or so I've gone from never having a Motobecane to having three in the family stable, and all three have that pretty red accent color. The regular Jagwire red is too bright and saturated. Two bikes are SS builds so less needed. Third bike is a vintage build so no need for the STI type housing
Have to trade: 600 tricolor calipers, lots of odds and ends.
This shows the color, also a situation where the housing is too short:
Have to trade: 600 tricolor calipers, lots of odds and ends.
This shows the color, also a situation where the housing is too short:
__________________
I never think I have hit hard, unless it rebounds.
- Dr Samuel Johnson
I never think I have hit hard, unless it rebounds.
- Dr Samuel Johnson
#8422
Senior Member
Join Date: Jun 2007
Location: Chicago
Posts: 243
Bikes: '82 Trek 613, '83 Lotus Eclair, '86 (?) Yokota Ranger, '85 Schwinn Cimarron
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Forgot some stuff!
HAVE:
New, unused Rivendell bar end shifter pods w/ or w/o shimano 9-sp index shifters (can friction shift too), shimano washers/ adapters
42cm Sakae road champion bars
Early 90s Shimano Exage aero brake levers with new black shimano hoods
Nice Aluminum stem that says "S2 felt," 120mm long
The above are setup together right now, but I'm happy to separate
A set of 27" x 1.25" wheels:
both have sunshin large flange hubs, 36h front, 40h rear
the front has a brand new, never ridden CR18 rim and new double butted DT swiss spokes,
rear has single wall 40h Araya rim, original 2.0mm spokes, takes a freewheel (not cassette)
hubs spin very smoothly (always amazed by old Japanese hubs) and are pretty
This wheelset was on for my touring rig, but an accident made me change forks and thus wheel sizes to 700c.
The tires from the wheelset above-- 27x1.25" Panaracer Pasela Tourguard, kevlar bead, with maybe 100 mi on them
an extra chain whip
Campy BB, English size, with 122mm spindle with globe logo, unsure of model
Campy 2-bolt Seatpost 26.8mm size
Black Tektro flat bar brake levers for cantis or calipers
2 sets of shimano downtube shifter boss cable stops, one for flatback bosses, one for curved
Dia Compe 960 GC Cantis
(1) Rivendell Silver barend shifter ie a shifter and a pod, left side, unused (I used only the right one, whose ratchet is now stripped)
A number of chainrings in various BCDs (86, 110, 130)
shimano spd pedals with cartridge bearings
dia compe non aero levers with new, unused cane creek gum hoods
mks sylvan road pedals, model QUILL-2k
Time Criterium Pedals
Various 1980s 36h japanese hubs (Sansin, Suzue, Shimano), mostly used
WTB mountain saddle, NOS
various seatposts other than the campy above
ISO:
gold parts: 27” gold rims would be incredible, also grips, chain, whatever else.
cork grips
wide-range 6-speed freewheels (I need 2), new or nearly so
I'd like to trade the wheels above for something similar in 700c, either 126mm or 130mm-spaced, either freehub or flip flop fixed/ single speed
Nice aluminum cruiser bars (Nitto, VO, Soma, etc.), Moustache preferred, North Road or Dove or Albatross, etc. would work great
An Avocet Touring II saddle
A triple crankset in nice shape
A nice rear rack that is realistically tourable (Jandd, Surly, Nitto, Dajia, Tubus)
Fenders that will fit 26 x 2.1" tires
26” tire set
Platform/ touring pedals
HAVE:
New, unused Rivendell bar end shifter pods w/ or w/o shimano 9-sp index shifters (can friction shift too), shimano washers/ adapters
42cm Sakae road champion bars
Early 90s Shimano Exage aero brake levers with new black shimano hoods
Nice Aluminum stem that says "S2 felt," 120mm long
The above are setup together right now, but I'm happy to separate
A set of 27" x 1.25" wheels:
both have sunshin large flange hubs, 36h front, 40h rear
the front has a brand new, never ridden CR18 rim and new double butted DT swiss spokes,
rear has single wall 40h Araya rim, original 2.0mm spokes, takes a freewheel (not cassette)
hubs spin very smoothly (always amazed by old Japanese hubs) and are pretty
This wheelset was on for my touring rig, but an accident made me change forks and thus wheel sizes to 700c.
The tires from the wheelset above-- 27x1.25" Panaracer Pasela Tourguard, kevlar bead, with maybe 100 mi on them
an extra chain whip
Campy BB, English size, with 122mm spindle with globe logo, unsure of model
Campy 2-bolt Seatpost 26.8mm size
Black Tektro flat bar brake levers for cantis or calipers
2 sets of shimano downtube shifter boss cable stops, one for flatback bosses, one for curved
Dia Compe 960 GC Cantis
(1) Rivendell Silver barend shifter ie a shifter and a pod, left side, unused (I used only the right one, whose ratchet is now stripped)
A number of chainrings in various BCDs (86, 110, 130)
shimano spd pedals with cartridge bearings
dia compe non aero levers with new, unused cane creek gum hoods
mks sylvan road pedals, model QUILL-2k
Time Criterium Pedals
Various 1980s 36h japanese hubs (Sansin, Suzue, Shimano), mostly used
WTB mountain saddle, NOS
various seatposts other than the campy above
ISO:
gold parts: 27” gold rims would be incredible, also grips, chain, whatever else.
cork grips
wide-range 6-speed freewheels (I need 2), new or nearly so
I'd like to trade the wheels above for something similar in 700c, either 126mm or 130mm-spaced, either freehub or flip flop fixed/ single speed
Nice aluminum cruiser bars (Nitto, VO, Soma, etc.), Moustache preferred, North Road or Dove or Albatross, etc. would work great
An Avocet Touring II saddle
A triple crankset in nice shape
A nice rear rack that is realistically tourable (Jandd, Surly, Nitto, Dajia, Tubus)
Fenders that will fit 26 x 2.1" tires
26” tire set
Platform/ touring pedals
Last edited by tmoneygetpaid; 04-30-12 at 09:53 PM.
#8423
Senior Member
Join Date: Dec 2009
Location: St. Louis, MO
Posts: 1,681
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I have have gold Simplex SLJ RD, FD, and retrofriction shifters in nice shape. I also have Nitto B617AA bars.
HAVE:
Rivendell Shifter pods w/ or w/o shimano 7-sp index shifters (can friction shift too) with shimano washers
42cm Sakae road champion bars
Early 90s Shimano Exage levers with new shimano hoods
Nice Aluminum stem that says "S2 felt," 120mm long
The above are setup together right now, but I'm happy to separate
A set of 27" x 1.25" wheels:
both have sunshin large flange hubs, 36h front, 40h rear
the front has a brand new, never ridden CR18 rim and new double butted DT swiss spokes,
rear has single wall 40h Araya rim, original 2.0mm spokes, takes a freewheel (not cassette)
hubs spin very smoothly (always amazed by old Japanese hubs) and are pretty
This wheelset was on for my touring rig, but an accident made me change forks and thus wheel sizes to 700c.
Campy BB, English size, with 122mm spindle with globe logo, unsure of model
Campy 2-bolt Seatpost 26.8mm size
Black Tektro flat bar brake levers for cantis or calipers
2 sets of downtube shifter boss cable stops, one for flatback bosses, one for curved
Dia Compe 960 GC Cantis
(1) Rivendell Silver barend shifter ie a shifter and a pod, left side, unused (I used only the right one, whose ratchet is now stripped)
A number of chainrings in various BCDs (86, 110, 130)
shimano spd pedals with cartridge bearings
dia compe non aero levers with new, unused cane creek gum hoods
mks sylvan road pedals, model QUILL-2k
Time Criterium Pedals
Various 1980s 36h japanese hubs (Sansin, Suzue, Shimano), mostly used
WTB mountain saddle, NOS
various seatposts other than the campy above
ISO:
gold parts: 27” gold rims would be incredible, also grips, chain, whatever else.
cork grips
wide-range 6-speed freewheels (I need 2), new or nearly so
I'd like to trade the wheels above for something similar in 700c, either 126mm or 130mm-spaced, either freehub or flip flop fixed/ single speed
Nice aluminum cruiser bars (Nitto, VO, Soma, etc.), Moustache preferred, North Road or Dove or Albatross, etc. would work great
An Avocet Touring II saddle
A triple crankset in nice shape
A nice rear rack that is realistically tourable (Jandd, Surly, Nitto, Dajia, Tubus)
Fenders that will fit 26 x 2.1" tires
26” tire set
Platform/ touring pedals
Rivendell Shifter pods w/ or w/o shimano 7-sp index shifters (can friction shift too) with shimano washers
42cm Sakae road champion bars
Early 90s Shimano Exage levers with new shimano hoods
Nice Aluminum stem that says "S2 felt," 120mm long
The above are setup together right now, but I'm happy to separate
A set of 27" x 1.25" wheels:
both have sunshin large flange hubs, 36h front, 40h rear
the front has a brand new, never ridden CR18 rim and new double butted DT swiss spokes,
rear has single wall 40h Araya rim, original 2.0mm spokes, takes a freewheel (not cassette)
hubs spin very smoothly (always amazed by old Japanese hubs) and are pretty
This wheelset was on for my touring rig, but an accident made me change forks and thus wheel sizes to 700c.
Campy BB, English size, with 122mm spindle with globe logo, unsure of model
Campy 2-bolt Seatpost 26.8mm size
Black Tektro flat bar brake levers for cantis or calipers
2 sets of downtube shifter boss cable stops, one for flatback bosses, one for curved
Dia Compe 960 GC Cantis
(1) Rivendell Silver barend shifter ie a shifter and a pod, left side, unused (I used only the right one, whose ratchet is now stripped)
A number of chainrings in various BCDs (86, 110, 130)
shimano spd pedals with cartridge bearings
dia compe non aero levers with new, unused cane creek gum hoods
mks sylvan road pedals, model QUILL-2k
Time Criterium Pedals
Various 1980s 36h japanese hubs (Sansin, Suzue, Shimano), mostly used
WTB mountain saddle, NOS
various seatposts other than the campy above
ISO:
gold parts: 27” gold rims would be incredible, also grips, chain, whatever else.
cork grips
wide-range 6-speed freewheels (I need 2), new or nearly so
I'd like to trade the wheels above for something similar in 700c, either 126mm or 130mm-spaced, either freehub or flip flop fixed/ single speed
Nice aluminum cruiser bars (Nitto, VO, Soma, etc.), Moustache preferred, North Road or Dove or Albatross, etc. would work great
An Avocet Touring II saddle
A triple crankset in nice shape
A nice rear rack that is realistically tourable (Jandd, Surly, Nitto, Dajia, Tubus)
Fenders that will fit 26 x 2.1" tires
26” tire set
Platform/ touring pedals
#8424
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,409 Times
in
909 Posts
ISO: dark red/maroon cable housing; I could use several feet I think. In the last month or so I've gone from never having a Motobecane to having three in the family stable, and all three have that pretty red accent color. The regular Jagwire red is too bright and saturated. Two bikes are SS builds so less needed. Third bike is a vintage build so no need for the STI type housing
Have to trade: 600 tricolor calipers, lots of odds and ends.
This shows the color, also a situation where the housing is too short:
Have to trade: 600 tricolor calipers, lots of odds and ends.
This shows the color, also a situation where the housing is too short:
#8425
Too many bikes
Join Date: Apr 2006
Location: Boston MA
Posts: 1,257
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Looking for both a Uniglide Dura Ace 23 T freehub cog and a 23 T Dura Ace freewheel cog.
I have 24 and 25 t Dura Ace freehub cogs for trade. Also 13T & 15T cogs. All NOS. Plus tons of other stuff.
I have 24 and 25 t Dura Ace freehub cogs for trade. Also 13T & 15T cogs. All NOS. Plus tons of other stuff.