ISO and For Trade thread parts 2 and 3.
#9201
N+1
Join Date: Sep 2004
Location: Ann Arbor, MI
Posts: 1,310
Bikes: A few
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
Want:
Stronglight English 1" threaded needle bearing headset
Simplex retrofriction shifters
other stuff I know I am forgetting
more time to ride a bike
It gone
Have:
*shimano BR-MC70 canti brakes with Koolstop pads and tektro straddle wires-full bikes worth
*kalloy 27.2 aero seatpost
*avocet saddle with TI rails
*1" threaded carbon Nashbar fork
*random threadless stems
*Nervar 5 pin Double crankset
Everything below has a better description and pictures here->bicycleanonymous.blogspot.com
*Modolo non-aero brake levers
*SR World Custom bars and stem
*Shimano Acera cassette hub 135mm spaced laced to a Mavic MA40 700c clincher rim
*Shimano 600 tri color rear derailleur
*Profile quill stem, 45 degree angle 100mm 26.0mm bar clamp
*Shimano tricolor 600 crankset, 53/39 chainrings, 175mm arms
*Kalin 26.0mm 350mm long black
*Lion 3x7 shifters and V-brake levers with new shift cables
*Shimano Deore crank arms, model FC-MT60, 175mm arms, 110/74mm BCD
*Shimano 3X8 trigger shifters, model ST-M008
*Campagnolo low flange Record hubs 36 hole laced three cross with Hoshi double butted spokes to Araya Red Tubular rims. Hubs are spaced 100mm front and 126mm rear.
*Regina CX chain, 106 links long
*Shimano Dura Ace PD-7401 clipless road pedals.
*assorted Weinmann and Dia Compe non-aero or cruiser brake levers
*cross top brake levers
*steel track drops with grips off Specialized Langster, 31.8mm clamp
*11-23t 9 speed CS-6500 cassette
*Shimano RX100 braze on front derailleur, model FD-A551
*MKE V1 polo guard (only works on Sugino XD arms)
*Trans X 27.2 black seat post
*Modolo X-Tenos road bar with single cable grooves, 42cm wide, 26.0mm clamp
*26" Rear cassette wheel, Quando hub laced to a double wall ZAC19 rim, 32 hole, 135mm spacing
*RT double crankset, 110mm BCD 52/42 Sugino chainrings with 170mm arms
*Suntour XCE Front derailleur, bottom pull, 28.6mm clamp, new
*Clamp on downtube shifters
*Suntour SVX clamp on front derailleur, 28.6mm bottom pull
*New SRAM X4 Trigger shifters, 8 speed.
*Campagnolo Ypsilon Oxide Strada and Lambda Strada 32 hole 700c clincher rims
*Sachs LY97 7 speed freewheel, 12-24t
*Cinelli Groove aluminum drop bars, 26.0mm clamp, double grooved, and 44cm center to center width
*Shimano Exage double crank arms, 130mm BCD, 170mm arms
*brand new never used, Shimano Ultegra FD-6603, bottom pull triple derailleur for 31.8mm clamp
*NOS Stronglight model 99 chainrings, 86mm BCD, two 42t rings available.
*Ritchey 30.9 seatpost 350mm length
*Dia Compe 287V aero brake levers for use with V-brakes/mechanical disc brakes.
*Cane Creek headset bearings part # HSS2031
*Zoom suspension seatpost, 27.2mm
*Shimano FH-RM40-8 cassette rear hub, 135mm spacing
*Shimano Exage HB-RM50 front hub 36hole,
*Shimano C201 cassette rear hub. Hub is spaced at 135mm, 36 hole.
*Shimano FH-RM30 cassette rear hub. 135mm 36 hole
*Used unknown front quick release hub with monster skewer included 100mm spacing 32hole
*Shimano LX bottom pull front derailleur model FD-M567 34.9 clamp BRAND NEW
Stronglight English 1" threaded needle bearing headset
Simplex retrofriction shifters
other stuff I know I am forgetting
more time to ride a bike
It gone
Have:
*shimano BR-MC70 canti brakes with Koolstop pads and tektro straddle wires-full bikes worth
*kalloy 27.2 aero seatpost
*avocet saddle with TI rails
*1" threaded carbon Nashbar fork
*random threadless stems
*Nervar 5 pin Double crankset
Everything below has a better description and pictures here->bicycleanonymous.blogspot.com
*Modolo non-aero brake levers
*SR World Custom bars and stem
*Shimano Acera cassette hub 135mm spaced laced to a Mavic MA40 700c clincher rim
*Shimano 600 tri color rear derailleur
*Profile quill stem, 45 degree angle 100mm 26.0mm bar clamp
*Shimano tricolor 600 crankset, 53/39 chainrings, 175mm arms
*Kalin 26.0mm 350mm long black
*Lion 3x7 shifters and V-brake levers with new shift cables
*Shimano Deore crank arms, model FC-MT60, 175mm arms, 110/74mm BCD
*Shimano 3X8 trigger shifters, model ST-M008
*Campagnolo low flange Record hubs 36 hole laced three cross with Hoshi double butted spokes to Araya Red Tubular rims. Hubs are spaced 100mm front and 126mm rear.
*Regina CX chain, 106 links long
*Shimano Dura Ace PD-7401 clipless road pedals.
*assorted Weinmann and Dia Compe non-aero or cruiser brake levers
*cross top brake levers
*steel track drops with grips off Specialized Langster, 31.8mm clamp
*11-23t 9 speed CS-6500 cassette
*Shimano RX100 braze on front derailleur, model FD-A551
*MKE V1 polo guard (only works on Sugino XD arms)
*Trans X 27.2 black seat post
*Modolo X-Tenos road bar with single cable grooves, 42cm wide, 26.0mm clamp
*26" Rear cassette wheel, Quando hub laced to a double wall ZAC19 rim, 32 hole, 135mm spacing
*RT double crankset, 110mm BCD 52/42 Sugino chainrings with 170mm arms
*Suntour XCE Front derailleur, bottom pull, 28.6mm clamp, new
*Clamp on downtube shifters
*Suntour SVX clamp on front derailleur, 28.6mm bottom pull
*New SRAM X4 Trigger shifters, 8 speed.
*Campagnolo Ypsilon Oxide Strada and Lambda Strada 32 hole 700c clincher rims
*Sachs LY97 7 speed freewheel, 12-24t
*Cinelli Groove aluminum drop bars, 26.0mm clamp, double grooved, and 44cm center to center width
*Shimano Exage double crank arms, 130mm BCD, 170mm arms
*brand new never used, Shimano Ultegra FD-6603, bottom pull triple derailleur for 31.8mm clamp
*NOS Stronglight model 99 chainrings, 86mm BCD, two 42t rings available.
*Ritchey 30.9 seatpost 350mm length
*Dia Compe 287V aero brake levers for use with V-brakes/mechanical disc brakes.
*Cane Creek headset bearings part # HSS2031
*Zoom suspension seatpost, 27.2mm
*Shimano FH-RM40-8 cassette rear hub, 135mm spacing
*Shimano Exage HB-RM50 front hub 36hole,
*Shimano C201 cassette rear hub. Hub is spaced at 135mm, 36 hole.
*Shimano FH-RM30 cassette rear hub. 135mm 36 hole
*Used unknown front quick release hub with monster skewer included 100mm spacing 32hole
*Shimano LX bottom pull front derailleur model FD-M567 34.9 clamp BRAND NEW
Last edited by redxj; 04-10-13 at 08:47 PM.
#9203
hi
Join Date: Apr 2006
Location: Kingston, NY
Posts: 2,605
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Long shot, and probably not much of an audience here, but ISO 2.5" IRC Trailbear tires. Getting close to replacing mine, and the 2.25's just aren't gonna cut it. The 2.5" variety is no longer made.
#9204
MIKE is my name!
Join Date: Mar 2012
Location: finland,baltimore
Posts: 2,846
Bikes: hans lutz, , puch mistral ultima,2x Austro Daimler Smoked chrome Ultima,Austro Daimler Mixte,Austro Daimler 531 mixte, flying arrow,F Moser,
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Liked 20 Times
in
4 Posts
ISO
campagnolo 26.4 seatpost,
why is this thing so difficult to find without paying double true price on fleabay??
campagnolo 26.4 seatpost,
why is this thing so difficult to find without paying double true price on fleabay??
#9205
Senior Member
What is "true" price? They sell for between $60-100 shipped on eBay because that's what people are willing to pay.
__________________
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
#9206
Senior Member
Join Date: Mar 2011
Location: Tampa Bay, Florida
Posts: 1,698
Bikes: 87 Bridgestone 550 (Shocking Electric Metallic Pink)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
...or a $120-$160 on vintage bike part sites....but you don't have to worry about bidding and snipers....the price is the price. If you can find a deal somewhere, grab it. That IS the problem with vintage prices, they are what people are willing to pay for them....or a bit higher! (same reason folks ask $200 for a mid 70's Schwinn Varsity on CR list...you can always come DOWN on prices...going up...NOT so much! )
#9207
Wood
Join Date: Jun 2009
Location: Beaumont, Tx
Posts: 2,293
Bikes: Raleigh Sports: hers. Vianelli Professional & Bridgestone 300: mine
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 12 Times
in
10 Posts
ISO a 54cm frame & fork, Japanese Cro-mo, butted or not, early-mid 80's.
126 rear spacing. Sport-touring geometry. Paint condition not important, but no dings or kinks. Made for 27" ok, but better for 700c.
Trade '85 Bridgestone 300 in 58cm, or Miyata 710 in 49cm.
126 rear spacing. Sport-touring geometry. Paint condition not important, but no dings or kinks. Made for 27" ok, but better for 700c.
Trade '85 Bridgestone 300 in 58cm, or Miyata 710 in 49cm.
#9208
Senior Member
Join Date: May 2011
Location: Orange County, CA
Posts: 88
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
ISO:
Shimano 6400 Shifters - Either 7 speed indexed downtube or 8 speed STI's.
Shimano 6400 Shifters - Either 7 speed indexed downtube or 8 speed STI's.
__________________
20 Giant Escape 2 Disk
89 Centurion IM Master
20 Giant Escape 2 Disk
89 Centurion IM Master
#9209
Restore, ride, repeat...
Join Date: Aug 2009
Location: Chicago
Posts: 403
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I guess I'll give this thread a chance.
Things for trade:
Campagnolo C-record aero post 27.2
Campy 8-speed chorus rear dr
Campy 9-speed chorus rear dr
Campy 9-speed chorus crankset 53-39
Campy double pivot chorus calipers for recessed bolts
campy nuovo record rear dr no date code
I might have other stuff but I can't think of it now.
Things I will be needing soon:
campy super record recessed calipers and brake levers.
cinelli handlebars 40 width
Things for trade:
Campagnolo C-record aero post 27.2
Campy 8-speed chorus rear dr
Campy 9-speed chorus rear dr
Campy 9-speed chorus crankset 53-39
Campy double pivot chorus calipers for recessed bolts
campy nuovo record rear dr no date code
I might have other stuff but I can't think of it now.
Things I will be needing soon:
campy super record recessed calipers and brake levers.
cinelli handlebars 40 width
#9210
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,923 Times
in
1,491 Posts
Attention Gravel Grinders, Commuters, Tourers, and Tandem Owners !!!!!!
I have a pair of uber low milage Pasela TGs tanwall in x32 I am looking to trade for a pair of similar codition/style in either x25 or 23. I have had them mounted for about 3 years but I would be suprised if they more than 150 miles on them.
I might also consider trading for VGC cantilever brakes of Deore LX quality or better w/ levers. If you have CampI cantis we can talk too.
ISO; Decent quality 110 BCD 44T chainring (sorry no BioPace)
I have an Italian Centar BB that has less than 100 miles I would like to swap for an English in similar condition or my cups came off when I removed so if you just have the cups we could swap those.
Dropout spacers like these. I know there was thread recently about these but I don't there was a link to a source. Any of you resellers harvest these from old frames?
Also for all you guys who haunt the really old shops and shops closing and flea markets I am looking for one of these a Park CDG-1 for measuring crank BCDs
I have a pair of uber low milage Pasela TGs tanwall in x32 I am looking to trade for a pair of similar codition/style in either x25 or 23. I have had them mounted for about 3 years but I would be suprised if they more than 150 miles on them.
I might also consider trading for VGC cantilever brakes of Deore LX quality or better w/ levers. If you have CampI cantis we can talk too.
ISO; Decent quality 110 BCD 44T chainring (sorry no BioPace)
I have an Italian Centar BB that has less than 100 miles I would like to swap for an English in similar condition or my cups came off when I removed so if you just have the cups we could swap those.
Dropout spacers like these. I know there was thread recently about these but I don't there was a link to a source. Any of you resellers harvest these from old frames?
Also for all you guys who haunt the really old shops and shops closing and flea markets I am looking for one of these a Park CDG-1 for measuring crank BCDs
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Last edited by Bianchigirll; 09-28-12 at 06:00 AM.
#9211
Gone World Hepster
Join Date: Oct 2005
Location: Lincoln, NE
Posts: 1,211
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 7 Times
in
4 Posts
Dropout spacers like these. I know there was thread recently about these but I don't there was a link to a source. Any of you resellers harvest these from old frames?
#9212
What??? Only 2 wheels?
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,434
Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10
Mentioned: 189 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 645 Times
in
232 Posts
Are looking for hat particular tool or do you just need a convenient way to determining BCD in a variety of chainrings?
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
#9213
Hogosha Sekai
Join Date: Jun 2011
Location: STS
Posts: 6,669
Bikes: Leader 725, Centurion Turbo, Scwhinn Peloton, Schwinn Premis, GT Tequesta, Bridgestone CB-2,72' Centurion Lemans, 72 Raleigh Competition
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Likes: 0
Liked 21 Times
in
15 Posts
Disregard.
Last edited by RaleighSport; 09-27-12 at 12:29 PM.
#9214
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,332
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
Quoted: 786 Post(s)
Liked 520 Times
in
281 Posts
WTT: pair of Athena 9-speed Ergos for a pair of 8-speed Ergos
Or if anyone has a 9-speed Campy hub I could build on, I could keep the 9-speed Ergos.
Or if anyone has a 9-speed Campy hub I could build on, I could keep the 9-speed Ergos.
__________________
The man who dies with the most toys…is dead. - Rootboy
The man who dies with the most toys…is dead. - Rootboy
#9215
Senior Member
Join Date: Jun 2007
Location: Chicago
Posts: 243
Bikes: '82 Trek 613, '83 Lotus Eclair, '86 (?) Yokota Ranger, '85 Schwinn Cimarron
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have a 46t SR chainring in 110. Aluminum. I'm also 90% sure I have a set of this type of dropout spacer. PM if interested.
#9216
Señor Member
Join Date: Jul 2009
Location: Boston Burbs
Posts: 1,637
Bikes: Bedford, IF, Hampsten, DeSalvo, Intense Carbine 27.5, Raleigh Sports, Bianchi C.u.S.S, Soma DC Disc, Bill Boston Tandem
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Update....
ISO:
Silver dual pivot front brake, prefer nutted but can bust out the drill if necessary. 47-57mm
Shimano 8/9s long cage RD. 105 or better. Silver.
Have:
Sachs 6s freewheel. 13-30, very nice shape
Deore XT RD. M735, beautiful condition
Shimano bar end shifters SL-BS50 (Velobase link - I think they are 6/7 speed)
LOTS of other things.
ISO:
Silver dual pivot front brake, prefer nutted but can bust out the drill if necessary. 47-57mm
Shimano 8/9s long cage RD. 105 or better. Silver.
Have:
Sachs 6s freewheel. 13-30, very nice shape
Deore XT RD. M735, beautiful condition
Shimano bar end shifters SL-BS50 (Velobase link - I think they are 6/7 speed)
LOTS of other things.
Last edited by 4Rings6Stars; 09-27-12 at 09:17 PM.
#9217
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,923 Times
in
1,491 Posts
Perhaps I should change my wording a bit but yes I want one of these tools so i can measure chainwheels.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#9218
Senior Member
Join Date: Nov 2010
Posts: 3,504
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 586 Post(s)
Liked 612 Times
in
447 Posts
Looking to trade for a pair of decent French-thread pedals. I have a pair of Olimpic 64 pedals (Campy copies, maybe, though I know nothing about Campy stuff) and a pair of MKS AR-3s. Take your pick.
Also looking for a Stronglight 93 (122bcd) 52-tooth ring in excellent condition. I have other Stronglight rings in smaller sizes.
JV
Edit: Despite the 14 x 1.25 stamped on my crankarm, the threading is English after all--must have been retapped by a previous owner. So scratch the pedal trade.
Would still like to trade for a nice 52-tooth ring for a Stronglight 93, though.
Also looking for a Stronglight 93 (122bcd) 52-tooth ring in excellent condition. I have other Stronglight rings in smaller sizes.
JV
Edit: Despite the 14 x 1.25 stamped on my crankarm, the threading is English after all--must have been retapped by a previous owner. So scratch the pedal trade.
Would still like to trade for a nice 52-tooth ring for a Stronglight 93, though.
#9219
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,923 Times
in
1,491 Posts
I'll have to give that some thought. I have a chainguard i was going to use that tops out a 44T, plus I thought a 44x 12-23or25 would be plenty for a city bike.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#9220
Senior Member
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,778
Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 660 Times
in
351 Posts
Thanks, but this isn't the 52-tooth style ring I'm looking for--I need the older model 93 "star" pattern. I have smaller rings in varied condition.
JV
JV
__________________
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
#9221
Senior Member
Join Date: Apr 2006
Location: Washington County, Vermont, USA
Posts: 3,778
Bikes: 1966 Dawes Double Blue, 1976 Raleigh Gran Sport, 1975 Raleigh Sprite 27, 1980 Univega Viva Sport, 1971 Gitane Tour de France, 1984 Lotus Classique, 1976 Motobecane Grand Record
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 660 Times
in
351 Posts
French thread Phil Wood Cups
While I'm on here, would anyone be interested in trading a good pair of French-thread bottom bracket cups--just the cups, no spindle--for a pair of French-threaded Phil Wood cups? I'd prefer something suitable for a 1970ish Gitane TdF.
I could maybe be talked into parting with the Phil Wood cartridge, too, but in that case I'd need a lot more than just a set of cups.
JV
I could maybe be talked into parting with the Phil Wood cartridge, too, but in that case I'd need a lot more than just a set of cups.
JV
__________________
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
www.redclovercomponents.com
"Progress might have been all right once, but it has gone on too long."
--Ogden Nash
#9222
Senior Member
Vintage Mtn bike collector who ends up with a few road parts on occasion:
Seek high end 80's to very early 90's mountain bike stuff (that you may not need):
Currently need: Black hyperlite bars, M900 groupset, Araya 7X 26" rims, Ukai 26" rims, Early Flite saddle, CNC....etc
Have:
Seek high end 80's to very early 90's mountain bike stuff (that you may not need):
Currently need: Black hyperlite bars, M900 groupset, Araya 7X 26" rims, Ukai 26" rims, Early Flite saddle, CNC....etc
Have:
#9223
Senior Member
Vintage Mtn bike collector who ends up with a few road parts on occasion:
Seek high end 80's to very early 90's mountain bike stuff (that you may not need):
Currently need: Black hyperlite bars, M900 groupset, Araya 7X 26" rims, Ukai 26" rims, Early Flite saddle, CNC....etc
More:
Seek high end 80's to very early 90's mountain bike stuff (that you may not need):
Currently need: Black hyperlite bars, M900 groupset, Araya 7X 26" rims, Ukai 26" rims, Early Flite saddle, CNC....etc
More:
Last edited by Aemmer; 09-28-12 at 03:38 PM.
#9224
Senior Member
Vintage Mtn bike collector who ends up with a few road parts on occasion:
Seek high end 80's to very early 90's mountain bike stuff (that you may not need):
Currently need: Black hyperlite bars, M900 groupset, Araya 7X 26" rims, Ukai 26" rims, Early Flite saddle, CNC....etc
More:
Seek high end 80's to very early 90's mountain bike stuff (that you may not need):
Currently need: Black hyperlite bars, M900 groupset, Araya 7X 26" rims, Ukai 26" rims, Early Flite saddle, CNC....etc
More:
Last edited by Aemmer; 10-07-12 at 09:38 PM. Reason: Traded away