dweenk

I am looking for a threaded top race for a 1" headset. The bearing cover on this Shimano is plastic and has become brittle and cracked. I'm surprised that Shimano actually made such a POS. The headset is OK except for this, so I'm trying to extend its life.


I assume the plastic cover was originally pressed on to the nut.

Never mind, I have located a replacement top race. I am good to go.

frantik

ISO anodized purple and/or andodized blue 27.0 seat post ~350mm

clubman 

If by chance it doesn't fit, I can probably find a non Raleigh arm for you as well.

seely

ISO:

Shimano 600 DT shifters, not Tri Color
Quality Japanese 27.0 seat post (prefer a Sugino, Sakae, SR)
44-46cm bar of similar pedigree

HAVE:
NOS Mavic 571 36h hub
Sugino 170m 130 double, light use
Various bars, stems, posts
DiaCompe non aero drilled levers original gum hoods, light use
105 aero levers, blades rough but WHITE hoods in good used shape
Mismatched 105/600 DT shifters
Rough 105 Biopace double 172.5
Other Japanese odds and ends

shoota 

Does anyone have one of these recessed brake nuts in 30mm-35mm length?

retrofit

PM'd you Shoota

VintageRide

ISO: Pair of Honjo smooth or hammered 45mm 700C fenders.



Have: Stronglight A9 1" Roller bearing head set. English threaded with silver finish. Like new, hardly used. Also have Cinelli 1A 90mm stem ( later style ) in good condition with the usual wear and Cinelli Giro D' Italia 42cm handlebars.

Ex Pres 

ISO: Weinmann Shorty fenders for my newly acquired Holdsworth Record, like these. Let me know what you're looking for in trade.


I guess I should be looking for a Brooks B-5 (per catalog), too, or maybe a B-15 (purportedly as delivered) as shown on this one.

GordoTrek

Looking for a Brooks B17, rideable condition, anything but black... i have:

suntour cyclone rear derailleur 1st gen, shimano 600 freewheel, cane creek threadless 1 1/8 headset, VO City levers,

also have a Chris King threadless 1 1/8 headset

jonwvara 

Does anyone have a worn-out 50-tooth Stronglight 93 chainring they'd be willing to part with? As long as the body of the ring isn't bent or damaged, the condition of the teeth doesn't matter--I'm going to have them machined off to repurpose the ring as a chainring guard/pant protector for a slightly absurd project I have in mind. In fact, the worse the teeth are, the better, since I don't want to wreck and otherwise functional ring.
I have trade goods of various kinds.

crank_addict

ISO: Was dreaming the box-o-crap thread might have what I need but will the dream to just that.

Want only 1 tattered, thrashed, junk torn pannier that might have a frame support intact. It's for another project to salvage a picnic pannier of unknown name. Thank you

kflagg 

Believe all original 1973 ?? Raleigh Grand Prix. Rear wheel has a hop in it probably could get most of it out but haven't tried.... Has the Brampton flip flop hub. Mint Wrights saddle.Completely gone through by lbs. New tubes,rim tape,bar wrap,brake hoods,all new inner cables and everything cleaned and greased. Size 60 cm. Trade for bike parts tell me what you have.

kflagg 

More pics.

jdefran

ISO:
Campy Veloce 10 speed (older ones with Ultrashift)--trying a shimergo set up
Brown/Honey Brooks B17 or Pro (something wider than B-17 Narrow)
Dark gray or black shimano derailleurs
Matching brakes to above derailleurs



Have:
Shimano Tri Color 2x8 STIs
Shimano 8 speed barend shifters
Brown Brooks B-17 Narrow
Huret Jubilee RD
Various drop bars
Exage group set (derailleurs, shifters, brakes and matching white brake levers, biopace chainrings)
Friction dura-ace DT shifters
Raleigh panto'd parts
Weinmann centerpulls
Normandy HF hubs
Gyromaster hubs
Various other bits--whathca need?

crank_addict

ISO: brake lever boot for 1950's + tandem Mafac. No adjusters on these.

Steve Whitlatch 

ISO:

Suntour Superbe pedal for parts. I need the bearing cones and bearings.


I have:
Suntour Superbe RD first Generation VGC
Shimano Sora Front & Rear Derailleur. VGC
Shimano Altus DT Shifters and FD Clamp On (off a 1980 Schwinn Voyageur ) VGC

just dank

ISO: 120-130mm 1" quill stem, silver/polished, 26.0mm clamp

Jexbrah

I don't know where I should post this or if this is allowed, but does anyone have a left side tricolor crank they have lying around that would be willing to part with?

Edit: Looking for 170mm

**Mod Edit: Merged this into the ISO sticky.

cyclotoine

I've got a gunmetal grey 3ttt one if you're interested and also likely have a 120 with 25.4 if that could work.

rccardr 

I have a 120 Nitto in silver satin finish with a 26.0 clamp. Trade bait?

jonwvara 

If anyone here can use something this new, I have a Shimano 105 full-size triple crankset, 175 mm arms, takes an Octalink bottom bracket. If I'm reading the date code correctly, it's from 2003. The 30-tooth granny is in good shape, but the 52 and 42 rings are pretty shot. I'd say the crankset itself is in very good/excellent shape.
I'll be happy to send some photos to anyone who's interested--too lazy to bother otherwise.

mnmkpedals 

There's a set advertised on my local CL if you really needed, I'd be glad to get them to you. Seem steep to me at 40, but I have never sought out those pedals, so no idea about FMV. PM me if interested.

poke em

ISO:
165mm RX100 non drive side crank arm
or
165mm RX100, 105 or 600 crankset,with or without rings, in nice condition


Have:
Lots of stuff, ask.

Steve Whitlatch 

Sending PM.
Thanks

cyclotoine

All the superbe pedals I have owned took generic cartridge bearings.