unworthy1

if you decide you can live with GRAY, PM me. I thought I had a set in white but can't locate it, maybe I imagined that or it just might turn up, someday.

RobbieTunes

Got 'em.
Shoot me a PM with your address.

shoota 

ISO: GXP drive side bearing in grey

dweenk

ISO - Soubitez headlight and taillight for a Gitane Hosteller from around 1970. I could use a lens for the front, and maybe the back (but the plastic housing is compromised on that). I may need a complete rear light or fender with light. I have some photos of the lights. I have seen some on Ebay, but they are in France, so I'd like to source them domestically. am also missing the rear fender stay and fender mounting bolt.

I have stuff to trade like a small Raleigh Technium 460 frame (49cm) and a Jamis Explorer XR frame (42cm). I also have other stuff, so talk to me.

retrofit

ISO:
Raleigh “R” binder bolt
Maillard freewheel remover, 24-spline


For trade:
Shimano Ultegra 6500 right crank arm - Octalink, no rings
Shimano Octalink self-extracting crank arm fixing bolts with washers and dust caps
Cane Creek brake lever hoods, black
Campy rear quick release, some chrome peeling
Lambs wool MTB saddle cover
Zéfal HP4 Frame Pump, black, plastic
Zéfal Mountain frame pump, black, metal, late 80’s
Broken Silca frame pump for parts, blue (Silca head, not Campy)
Specialized 38T chainring, 130 BCD (I think, will measure to be sure)
SunTour New Winner 5-speed freewheel 13-19, gold
Ritchey Comp seatpost, 27.2, 350mm
MKS Steel half toe clips with hardware, x-large; these are modified, originally meant for straps, new, mounted once.
Darwin MTB-style brake levers, black

seedsbelize 

I'd like to be left alone for a few hours in that monster's closet.

Shp4man

I'm willing to trade a 1994 Diamondback MTB "Response Elite" MTB, -17 inch, TrueTemper chro-mo, Shimano Deore LX, Titanium bar, under 25 LBS!, or/and a 58CM Tange 2 SR frame and fork road bike for a relatively decent UE-8 or any French touring bike with mudguards and rear rack, Motobecane, Gitane?
UE-8 or whatever must be complete- I don't care if it needs restoration.

Only the frame and fork on this one:

CMAW 

Thanks, Unworthy, but I'm looking for white to replace gray. If it turns up, let me know!

shoota 

ISO: 26.0 compact bars (like Soma Highway 1)

pamaguahiker 

I need:
--2 pannier dry packs, waterproof pull overs for my front panniers.
--Mini front rack - bolt to cantis. nothing fancy needed.
--I need a hoop to fit a front lowrider system. hit me up with what you have and i may be able to get it to work.

Lots to trade. See a few posts up.
Also have 96 Trek Mountain Track, 16.5 inches frame size. Includes many parts. I have the entire bike but some items are trashed. So i can toss in some items but consider it frame and fork. The frameset is in good usable condition and being they have a following for quick builds, i figured i could trade it.

If you have a frameset in 58-59 cm. Let me know. It would be for just a quick build using parts i have lying around.
email me for pics. pamaguahiker@gmail.com

crank_addict

ISO: Pair of early Weinmann 730 calipers. I realize there's probably millions of them out there and as used on Schwinns but I'm after the early version script 1950 / early 60's (not having the box around the 'WEINMANN'). Looks like this image but not the 500 series. Any condition. Have stuff to trade just let me know whats on your radar. Thank you
---------------> release lever or cable adjusters not needed.

YouthxCrew

LOOKING FOR: Sugino Proto crank (square taper version)

HAVE: Various small parts, bearings, races, shifter springs, etc, message me for all of them

Mafac toolkit (6 tools)

Dia Compe brakes (needs new pads)

Unbranded chromed rear rack

37-590 chromed steel wheels (with new Kenda tires and tubes)

22" lugged fork (1" steerer, painted blue with lugs outlined in gold)

Bianchigirll 

Anyone need a pair of Ofmega 144 BCD 42/52 rings?
What about a beat up old pair of MKS pedals? I have no idea where they came from.

I am not in need of much maybe a few 700 presta tubes? I don't imagine anyone has any Zefal inflater/cartridge adaptors they don't want. Just the plain silver one, no valves or any nonsense.

RaleighSport

ISO: 25.4 Carbon Fiber Seatpost, or 25.0-25.4 Aero seatpost (Shimano preferred), 1 inch threaded high quality steel fork or 1 inch threadless CF fork, 90-100mm good quality quill stem, or 90-100mm modern threadless stem, Shimano 600/105/dura ace whatever triangular pedals with clips, Shimano 6501 1 inch threaded headset

FT: Shimano 2x9 Sora Brifter seat in okay condition, Shimano 2 or 3x7 RSX Brifter set, Shimano 600 (6203?) Long Cage RD, Shimano 105 (1055 or 105sc I forget which) double FD, Shimano Ultegra Triple FD braze on (6700 or 6800?) Shimano Ultegra Triple FD Clamp (31.8 if I remember right), Suntour Cyclone 7000 FD (I might as also be convinced to part with my RD 7000),Suntour SL short cage RD, Raleigh Branded Suntour V-GT RD(I also have a matching FD and cranks for this), two V-GT Luxe RD's for parts (Enough good parts to make one RD), set of 700x50mm tires as well one tire mounted once. I have other items as well so if you have something I need please let me know.

Most for trade items can be viewed here: July 2014 Photos by ascendingsmoke | Photobucket

OldsCOOL

Still have these? I took a set of my 460 this spring to assemble my Cannondale. I need a set for another bike. Nice, light and responsive calipers.

vonfilm 

I have found the seat post that I needed.
I would trade the Strong 26.8 seat post for some nice alloy Simplex or SunTour downtube shifters. Let me know if you need pictures of the seat post. It is in very nice condition.

cderalow

Need: shimano 600 tricolor brake barrel adjusters

have: shimano 600 tricolor fd-6400 that doesn't seem to work properly.
nisi count arch 700c tubular 32h rim (I'll have to delace it from a hub)

Bamfbroc

I have a brooks swift saddle (chrome) I recieved as a give for christmas. It probably has about 100 miles but not for me. Im looking to trade for a B17! Preferably in newer condition!

Cheers!

dweenk

ISO:
A Huret front derailleur cage. I have a Huret FD body without cage. It appears that the cage had a post that was clamped by a through bolt. There is only one travel adjustment screw on the body, so I thought that the other adjustment would be the extension of the cage in the through bolt. Here are pix.

redcaymatt

Looking for a prewar Sturmey Archer Quadrant Shifter. If you have a matching hub or wheel or wheel set I'd be interested. Is it drum brake? no problem. Still interested.

I have a ton of parts to trade from the sixties to the 90's both road and mountain. Thanks!

brockd15 

ISO: 28.6 Shimano clamp (adapter) for a braze-on front derailleur, in silver.

Carmelvalleyguy

New guy here....So, here's what I'm looking for. Complete bike or frameset that has to be 61-63 cm. Condition, well I'm not looking for junk but as long as I'm well informed on the condition, I would consider it.

1. 70's Raleigh International
2. Bottecchia Early 70's top of the line (Professional??) (Full campy)
3. Potentially a Raleigh Professional
4. Masi Early 70's Gran Criterium
5. Ok, Paramount as well. 1970's vnitage
6. really.... any Italian high end bike from preferably from 1970 through 76.
7. Campagnolo Nuevo Record components

What I have are ALL non-related bike items.

1. 1973 Fender Stratocaster. Custom black original finish from Fender. This has been my go to guitar. Plays better than all my 50's Gibson’s including several of my les pauls.
2. 1964 Gibson acoustic LG-1 in solid but dinged up (it's been played) with hard-shell case.
3. Epiphone Korina Explorer @ 2000 (year) with 1 upgraded pickup. Great player in great shape. Hard shell case included
4. Epiphone Korina Flying V @ 2000 (year) with both pickups upgraded (old Gibson pickups). One tuner plastic is missing and the plastic screw on knob for the rhythm/treble is missing. Hard shell case is included
5. Marshall Valve State amp / cabinet combo from 2000 (year). VS 100R
5. 1979 Yamaha IT400 2 stroke Enduro that has been restored. Anyone who knows these bikes will understand what beasts they are. New 3rd over piston, replaced all seals, rebuilt shock and way to much to list.
Dave

Force 

Welcome. Make sure you remove your references to cash, as they are not permitted on this thread. Hope you find what you are looking for.
[QUOTE=Carmelvalleyguy;17049346]

jdefran

HAVE:
2X8 Shimano Tri-Color STIs

ISO:
3X8 Shimano STIs of similar era

jonwvara 

If any of you Cannondale enthusiasts out there are looking for a Cannondale bottle with the Velcro holder, I have one. The holder mounts to the frame with screws via the usual braze-ons. I can put up a photo if anyone wants to see it.

I'm looking for a long-cage Suntour Vx rear derailleur and a few other things that aren't coming to mind right now.