drasp

ISO: tall quill stem w/ 80-90mm reach & plenty of room to get me upright.
Suntour sealed bearing jockey wheels for my Cyclone mkII

FT: NOS SR 60mm reach quill stem
set of (L) MKS half-clips, new in bag (these are actually too small for me, Japanese sizing, IIRC)

Happy to pay $$$ for items I'm in need of if no swaps can be found.

dweenk

I have a pair of no-name brake levers for a road bike with steel bars ( MTB diameter, which can be changed for a larger diameter clamp). Yes, they have turkey wings, as they should. They are in great condition. No scratches or scrapes, just a bit of patina from age. They are alloy, so no rust. Here is a photo of one. I will trade for something of similar value. Please forget the 1st pix.

[ATTACH=CONFIG]405982

Wheels Of Steel

Quid pro quo trades only in this thread. No dolla bills.

YouthxCrew

ISO: Nishiki headbadge

HAVE: 22.2mm chrome steel stem

25mm chrome steel drop bars

Schwinn-Approved chrome steel drop bar

No-name alloy road brake levers

Chrome cotter crank with NOS cotters and axle.

OldsCOOL

My riding buddy has a Cannondale crit with a 7sp shimano FW that needs something with a 28t granny. I think it's an SIS or comparable. He may even switch to friction if necessary. The hills around here are eating his legs/knees.

BluesDaddy

ISO:

Rear Derailleur, Shimano, medium cage, Road or Mtn, needs to handle ~32T cog, XT 105 etc

Downtube cable stops for STI

I have all kinds of parts for trade.

inkandsilver

I have one of these in nice shape, if that floats your boat.

I'm also looking for downtube cable stops, but the clamp-on kind used with barcons/stemshifters. Or black/bronze ATB pedals. Or a Blackburn MTF-1 front rack in black.

triumph.man

ISO:
100mm/110mm or 110/120mm Nitto quill stem (nitto sizing / center to center)
Nitto Noodles Bar
26.8 silver setback seatpost


Available for Trade:
Nitto B125 - 40cm
Nitto 90mm/100mm dynamic stem
IRD crankset (brand new; installed and removed; with pedal threads being cross threaded)

truckface

Still need a handful of things to finish up this beauty. Would love any help you can give!

ISO:

- 36h high flange front hub in shiny-ish condition. Trying to sorta match this Sturmey hub.
- 1" threaded headset. Something silver and in good shape, but doesn't need to be fancy. (LBS says I need a 30.0/26.4 but Sheldon says standard ISO should work.)
- 27.2 silver seatpost, cosmetically attractive.
- 38t-42t chainring, 50.4 BCD. For the inner position of a TA double.
- One silver bar end plug - Nitto, V-O, or the like.
- Crane brass hammer-strike bell. Could easily buy one new, but I like 'em well-worn. : )

HAVE a bunch of (mostly) early-mid 80s things:
Campy pedals + Christophe clips
MKS pedals+ Specialized clips
Suntour Symmetric shifters
Suntour Superbe calipers
36h HF Normandy Luxe rear
Probably a Blackburn rear rack or two and a bunch of things I'm not remembering at the moment...

Thanks!

RobbieTunes

PM sent.


PM sent.

KS_rider

Have an NOS Campy 6sp freewheel, english threads 13-22 and a Park CR-2 cotter press in superb condition.



ISO

(1) An extremely well maintained DA7700 build kit. Primarily crankset, rear derailleur and brakes. Don't really need the brifters.
(2) Campy SR 32-hole front hub (circa early 1980's, the one with the oil port) + skewer in at least very good condition.

chapel

ISO 44-46mm drop bars. 25.3 clamp size
or
44-46mm drop bars with a quill stem that matches.

JohnDThompson 

Do you mean the seldom seen outside of trade shows and sponsored pro teams "Super Record" hubs with the dubious titanium axles, or the more common "Record" hubs with steel axles that shipped with almost all "Super Record" groups?

KS_rider

I should have written Campy Record, somehow got SR stuck in my mind. The steel axle version. It looks like this:

Narhay

ISO locknut for pedal spindle from an early Shimano XT PD-M730 platform pedal. Mine stripped last night taking them apart. It is relatively small in comparison to other spindle locknuts I've seen and has a fine thread. Maybe other shimano pedals have a similar system.

Have...lots of bits and bobs. Let me know if you're looking for anything in particular.

pamaguahiker 

I have for trade:
American Classic Equipment water bottle cage, it is missing one of the clamps. please see pic. If you need and can use this, cool. If you have a clamp that will work, we can work out a trade as well. As it is now...just can't use it.
I also have a Deore light action top cap. I am sure someone could use the for a project.
also, if you are into being super specific about restorations. here is a Cannondale BB cable clamp. says Cannondale right on 'er.

Need:
any touring type items, etc.
Just hit me up with some trade offers. Thanks

retrofit

Chapel,

Are your bar measurements c-c or outside to outside?

crank_addict

ISO: For a tandem stoker setup, 26.6 diameter seatpost with offset and ability to reverse, allowing for level saddle. Prefer SR but any considered and other ideas. Circa 1970-80's even sweeter.

(I wish to retain the captain stem but want a more forward seat position. With the tandem having an eccentric bottom bracket, I'm hoping it should work out for a wider range of fitment.)

To trade, I do have an SR 26.2 diameter full offset with ability to level saddle or the SR Laprade - both depicted. Other items as well - please ask.

chapel

I was going based on an On-One Midge bar.

seedsbelize 

Pm sentenced

seedsbelize 

The tablet strikes again.

David Newton

ISO:
Italian thread bottom bracket, the chart says it should be a 68ss 112mm spindle, but what have you?
27.2 seat post, silver, Laprade is good.

I have some stuff to trade...

crank_addict

ISO: Vintage chain guide that mounts to seat tube. Prefer something like this Super Champion but open to suggestions:


Let me know your needs and hopeful for trade. Thanks

jimmuller 

ISO: A Campy NR rear skewer, 6-speed (126mm), curved lever, with Locked and Unlocked marked on the lever.

Have: Similar but shorter, apparently for a 5-speed (120mm). It also says Campagnolo and Brev Int on the skewer nut (not the acorn), unlike any of my other Campy skewers.

Univegavelo

Hey guys,

ISO: 10 Speed DA Downtube Shifters (or some old ratcheting friction shifters)
A Dura-Ace double crankset and bottom bracket (or a velo orange grand cru), silver, 7-9 speed
Silver Cinelli 1" quill stem/ Cinelli drop bar
26.6 Cinelli seatpost, silver, will consider other brands!

Have: A ton, but some highlights include 5700 105 Brifters (2X10) with 5700 Crankset/bottom bracket, 5700 RD and 5700 FD, 2 white bontrager saddles, a fox DHX 5.0 rear shock, etc..

I've got a fair amount of vintage stuff I am too lazy to compile and type, so feel free to ask. Oh and the 5700 group is the black version. Please PM me your email if interested.

Happy to be back on the forums, my old account is linked to a non existent email address and I forget the password!

Cheers