Austro-Daimler question
#1
Member
Thread Starter
Join Date: Jan 2009
Posts: 32
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Austro-Daimler question
Hey, I'm new to the forum and to bikes in general, but I recently acquired an Austro-Daimler, I don't really have any intention to sell it but I was wondering if anyone could ID it, it says Austro Daimler on the side and "S" but the rest is scratched off, its a teal color, I'll post pictures tomorrow.
I was also wondering if repainting the frame (getting rid of whats left of the logos) would deminish the value? I have no plans to sell it at the moment, but in the future I may consider it. As far as I know only it's original aside from tires (which are totaled anyways so I'm buying new ones) and pedals.
I do plan on saving the emblem and gluing it back on after the paint job
I was also wondering if repainting the frame (getting rid of whats left of the logos) would deminish the value? I have no plans to sell it at the moment, but in the future I may consider it. As far as I know only it's original aside from tires (which are totaled anyways so I'm buying new ones) and pedals.
I do plan on saving the emblem and gluing it back on after the paint job
#2
Senior Member
Join Date: Nov 2003
Location: Soviet of Oregon or Pensacola FL
Posts: 5,342
Bikes: Still have a few left!
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 467 Post(s)
Liked 532 Times
in
267 Posts
Could be a Super Leicht model. Here is a link to one that was repainted that still looks good:
https://www.flickr.com/photos/fox_dog/2488812797/
and here is a link to a BF thread:
https://www.bikeforums.net/classic-vintage/66558-austro-daimler-sl.html
And here's one more link:
https://www.classicrendezvous.com/ima.../AD_SuperL.jpg
I used to have an AD Olympian, wish I'd kept it.
Don
https://www.flickr.com/photos/fox_dog/2488812797/
and here is a link to a BF thread:
https://www.bikeforums.net/classic-vintage/66558-austro-daimler-sl.html
And here's one more link:
https://www.classicrendezvous.com/ima.../AD_SuperL.jpg
I used to have an AD Olympian, wish I'd kept it.
Don
Last edited by ollo_ollo; 01-15-09 at 12:12 AM. Reason: add link
#3
Senior Member
Join Date: Jun 2008
Location: SoCal
Posts: 1,880
Bikes: Lemond, Gios, Fuji, Trek, too many to write
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
I'm going to cry. My first sort of real race bike was an AD. I actually did a junior's race with one.
#4
Great State of Varmint
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
Puch Austro-Daimler Steyer (the full name of the Austrian company that made these - though some later one's were made in Japan) made some very nice machines. I own one. Unknown frame. Looks like an Inter10 - but there are variations in the geometry that say "custom order - never picked up." So these bikes can be difficult to ID, even with the serial numbers.
Please do post pictures. I'd love to help you ID your A-D. If you ever do decide to sell it - there are many people looking for a Puch A-D out there. They have developed a healthy mystique amongst quite a few serious riders.
Another Puch A-D that starts with 'S' was the SLE - a fast touring machine (intermediate racer) that didn't cost as much as the Superleight, but still fast as lightning and intuitively responsive.
Please do post pictures. I'd love to help you ID your A-D. If you ever do decide to sell it - there are many people looking for a Puch A-D out there. They have developed a healthy mystique amongst quite a few serious riders.
Another Puch A-D that starts with 'S' was the SLE - a fast touring machine (intermediate racer) that didn't cost as much as the Superleight, but still fast as lightning and intuitively responsive.
Last edited by Panthers007; 01-15-09 at 01:08 AM.
#5
Senior Member
Join Date: Feb 2008
Location: SRQ
Posts: 530
Bikes: '69 Raleigh DL-1, '72 Paramount, '75 Eisentraut, '80 A-D Vent Noir II, '82 A-D Inter 10, '83 Motobecane Grand Touring, '83 Stumpjumper, '84 Masi GC, '87 Recherche, '87 Tesch 101, '88 Tesch S-22, '88 Davidson...
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I too am looking forward to photos. If it's a lighter teal (Azure Blue - more turquoise really), it sounds like it might be a 'S'tarleight. Nice bike if it is and very elusive (I've been searching for one to add to the family for many many years and haven't come across any). All 531 with complete Dura Ace EX (at least originally). A darker teal (Salzburg Blue) would make it an 'S'LE. It's 531 as well with Huret/Nervar drivetrain and Weinmann brakes.
That unknown frame could also be an SLE. In the Puch-badged years, they looked almost identical with only subtle differences (531 fork=Inter 10, Puch fork=SLE; also check under the bb for a shell). Very nice bike in any case.
Unknown frame. Looks like an Inter10 - but there are variations in the geometry that say "custom order - never picked up." So these bikes can be difficult to ID, even with the serial numbers. Another Puch A-D that starts with 'S' was the SLE - a fast touring machine (intermediate racer) that didn't cost as much as the Superleight, but still fast as lightning and intuitively responsive.
#6
Great State of Varmint
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
The fork is 531, but the rear geometry is off for an Inter10. But I've given up speculating. Ran the serial number - falls into the unknown area. Whatever - it's self-steering, nimble, and very, very fast. Bought it through Sheldon Brown in 1982. He didn't know what it was, either. Just that he knew I was looking for a top-end 531 frame, and this showed up as a special offer to the Puch distributors - said they had a few. We ordered. 4 months later - Unknown arrived.
Bring on the pictures! LOL.
Puch A-D's rule.
Bring on the pictures! LOL.
Puch A-D's rule.
#7
Member
Thread Starter
Join Date: Jan 2009
Posts: 32
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Sorry guys, no opportunity to get pics today, I was too tired from school to go out haha, I'll probably take some tomorrow, be warned its very worn and rusty so I may ask some questions in regards to refurbishing it.
A friend of mine found it in the woods a year ago and gave me it haha so it's pretty beaten up and the gears and whatnot are very rusty, does anyone have a good rust removing method? Keep in mind I dont have much money as I'm still in high school
A friend of mine found it in the woods a year ago and gave me it haha so it's pretty beaten up and the gears and whatnot are very rusty, does anyone have a good rust removing method? Keep in mind I dont have much money as I'm still in high school
#8
I'm in shape! A round one
Join Date: Jan 2005
Location: Lake View, AL
Posts: 131
Bikes: Konas: Jake the Snake-Fire Mountain-Zing Supreme, Surly Long Haul Trucker, Santana Arriva tandem, Montagues: Paratrooper-Fit, Trek 1200, Bianchi Ocelot, and an old Bridgestone 200 I rebuilt as a singlespeed.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
I held one for a guy for a while, the frame was smoked chrome. Very nice ride.
#10
Senior Member
Join Date: Feb 2008
Location: SRQ
Posts: 530
Bikes: '69 Raleigh DL-1, '72 Paramount, '75 Eisentraut, '80 A-D Vent Noir II, '82 A-D Inter 10, '83 Motobecane Grand Touring, '83 Stumpjumper, '84 Masi GC, '87 Recherche, '87 Tesch 101, '88 Tesch S-22, '88 Davidson...
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
The fork is 531, but the rear geometry is off for an Inter10. But I've given up speculating. Ran the serial number - falls into the unknown area. Whatever - it's self-steering, nimble, and very, very fast. Bought it through Sheldon Brown in 1982. He didn't know what it was, either. Just that he knew I was looking for a top-end 531 frame, and this showed up as a special offer to the Puch distributors - said they had a few. We ordered. 4 months later - Unknown arrived.
Bring on the pictures! LOL.
Puch A-D's rule.
Bring on the pictures! LOL.
Puch A-D's rule.
#11
Great State of Varmint
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
Intermission: I put on the red levers - picked up that set - NOS - from a guy in Norway. And as the most hideous touch I could muster - put on some old Bianchi Celeste green brake-cable housing. That'll make people wince!
#12
Senior Member
Join Date: Feb 2008
Location: SRQ
Posts: 530
Bikes: '69 Raleigh DL-1, '72 Paramount, '75 Eisentraut, '80 A-D Vent Noir II, '82 A-D Inter 10, '83 Motobecane Grand Touring, '83 Stumpjumper, '84 Masi GC, '87 Recherche, '87 Tesch 101, '88 Tesch S-22, '88 Davidson...
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Intermission: Nice one Chuck! Looks like Victory/Triomphe up front and 600 Ultegra in the rear(?). Can't tell what you're running for hubs/freewheel. How does it ride?
Call me a dork, but sounds kinda cool actually. Any pics? I always liked Celeste, just maybe not for an entire bike. I like the idea of a little accent here and there. I'm doing pink Benotto (found a good source in Mexico) on one of my smoke chromes. I should go Crockett & Tubbs and do the Celeste guides (right now it's white/white). Whaddaya guys think?
(photoshop dramatization)
(photoshop dramatization)
#13
Senior Member
Join Date: Feb 2008
Location: SRQ
Posts: 530
Bikes: '69 Raleigh DL-1, '72 Paramount, '75 Eisentraut, '80 A-D Vent Noir II, '82 A-D Inter 10, '83 Motobecane Grand Touring, '83 Stumpjumper, '84 Masi GC, '87 Recherche, '87 Tesch 101, '88 Tesch S-22, '88 Davidson...
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
More intermission: Someone really needs to get this one:
https://www.bikeforums.net/classic-vintage/491455-ebay-craigslist-finds-you-looking-one-these.html#post8192362
https://www.bikeforums.net/classic-vintage/491455-ebay-craigslist-finds-you-looking-one-these.html#post8192362
#14
Great State of Varmint
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
According to a Puch specs. sheet, the SLE's forks are Puch 2500. Perhaps 2700 is the later version? Anywho, what kind of dropouts does it have? I think the SLE was Gipiemme.
I want to see the pink Benotto tape! Go for it! Let's see who can make the most garish Puch in the world! LOL!
Here's the Celeste - I removed the green Brooks tape and put the black back on though:
I want to see the pink Benotto tape! Go for it! Let's see who can make the most garish Puch in the world! LOL!
Here's the Celeste - I removed the green Brooks tape and put the black back on though:
#15
Member
Thread Starter
Join Date: Jan 2009
Posts: 32
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I could only take 2 pics, my camera died in the cold (it was -19 degrees or so)
Last edited by elstevodiablo; 01-16-09 at 04:32 PM. Reason: wrong image link
#16
Great State of Varmint
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
Not sure of the model-name. But thats a lower-end A-D Puch. This bike was made for export to the USA as it says A-D on the headbadge. Puch Austro-Daimler Steyer marketing people, of Graz, Austria, tried hard not to let anything labeled 'PUCH' cross the Atlantic. The concern was that people would mispronounce PUCH (Cross between Pooook and Puuuuuck) as PUKE or PUSH - thereby sinking sales.
It's certainly worthy of restoring/upgrading. Puch A-D's have become (as this thread demonstrates) a cult item. And well-deserved at that.
More photos would be nice, once your camera warms up or you haul your prize inside out of the freezer. Try to get some close-ups of the lugs and the dropouts. From what I can see, it has some very nice lugwork going. And I'm guessing those are the original wheels. I'll guess 27" - but are those built 3-cross or 4-cross?
You've sparked my curiosity!
It's certainly worthy of restoring/upgrading. Puch A-D's have become (as this thread demonstrates) a cult item. And well-deserved at that.
More photos would be nice, once your camera warms up or you haul your prize inside out of the freezer. Try to get some close-ups of the lugs and the dropouts. From what I can see, it has some very nice lugwork going. And I'm guessing those are the original wheels. I'll guess 27" - but are those built 3-cross or 4-cross?
You've sparked my curiosity!
#17
Member
Thread Starter
Join Date: Jan 2009
Posts: 32
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Now that you guys have seen what the bike looks like, any ideas on how to fix it or what it is?
And is there anyway to fix that cracked up plastic/foam stuff on the brake levers located on the handlebars? Like can I buy a cover or replacement for the plastic/foam? I don't have much money and the brakes themselves work fine.
And is there anyway to fix that cracked up plastic/foam stuff on the brake levers located on the handlebars? Like can I buy a cover or replacement for the plastic/foam? I don't have much money and the brakes themselves work fine.
#18
Member
Thread Starter
Join Date: Jan 2009
Posts: 32
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Can I ask what lug work is exactly? I'm new to bikes and don't know all the technical terms. And I would love to bring it onside to take some of the rust off and clean it off but my parents said no (remember I'm a high school student). Do you know any quality entry level parts that aren't too pricey? I'd love to fix it up but low on cash. So far I decided to paint it (my grandpa paints cars so he said he'll do it for me) and I'm buying new tires.
#19
Gone World Hepster
Join Date: Oct 2005
Location: Lincoln, NE
Posts: 1,211
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 7 Times
in
4 Posts
Here are a couple of pics and an album link to a Puch A-D I was kind of negotiating for a sale late last fall but other things kind of got in the way and I let it slide; the owner told me he was going to sit on it over the winter and repost it on eBay. He was asking $200 plus $65 for FedEx Ground shipping. If anyone is interested, PM me and I'd be happy to provide you with his email address and let you make your own inquiry. It's that nice burgundy color. elsteveodiablo I'm fond of it just the way it looks, nice bike.
https://s270.photobucket.com/albums/j...ustro-Daimler/
https://s270.photobucket.com/albums/j...ustro-Daimler/
#20
Great State of Varmint
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
With limited financial resources, I'd say that you should approach this as an ongoing project. It might take you a year or two to completely build this - or any - bike up to the fully restored/upgraded level.
Lugs are what connect the tubes of the frame together. They are, for instance, where the seat-tube connects to the top-tube. Like little sleeves of metal (usually) that the tubes fit into and are then brazed to hold the tubes together. Regards the brake-HOODS that are all cracked - replacements are widely available. But before you buy a set of Weinmann replacement hoods, you should clean the brakes thoroughly and oil them and see if they are worth saving. You might want to get a better brakeset (kaChing!$$). Such is why this may well be a long-term project for you. Like my friend who bought a 1947 Cadillac-LaSalle hearse when he was in high school. That took him years to restore, but he did it as money and time allowed.
Here is a good site with videos of how to do basic mechanics on bicycles:
https://bicycletutor.com/
And here is the Guru of all-things Bicycle, Sheldon Brown:
https://www.sheldonbrown.com/
I'll let someone else take the podium now...
Happy Trails!
Lugs are what connect the tubes of the frame together. They are, for instance, where the seat-tube connects to the top-tube. Like little sleeves of metal (usually) that the tubes fit into and are then brazed to hold the tubes together. Regards the brake-HOODS that are all cracked - replacements are widely available. But before you buy a set of Weinmann replacement hoods, you should clean the brakes thoroughly and oil them and see if they are worth saving. You might want to get a better brakeset (kaChing!$$). Such is why this may well be a long-term project for you. Like my friend who bought a 1947 Cadillac-LaSalle hearse when he was in high school. That took him years to restore, but he did it as money and time allowed.
Here is a good site with videos of how to do basic mechanics on bicycles:
https://bicycletutor.com/
And here is the Guru of all-things Bicycle, Sheldon Brown:
https://www.sheldonbrown.com/
I'll let someone else take the podium now...
Happy Trails!
Last edited by Panthers007; 01-16-09 at 05:35 PM.
#21
Great State of Varmint
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
Here are a couple of pics and an album link to a Puch A-D I was kind of negotiating for a sale late last fall but other things kind of got in the way and I let it slide; the owner told me he was going to sit on it over the winter and repost it on eBay. He was asking $200 plus $65 for FedEx Ground shipping. If anyone is interested, PM me and I'd be happy to provide you with his email address and let you make your own inquiry. It's that nice burgundy color. elsteveodiablo I'm fond of it just the way it looks, nice bike.
https://s270.photobucket.com/albums/j...ustro-Daimler/
https://s270.photobucket.com/albums/j...ustro-Daimler/
That is an SLE if ever there was one. If you pass that up at $265 inc. shipping...well, you know. GRAB IT!!
#22
Member
Thread Starter
Join Date: Jan 2009
Posts: 32
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Well, I'm going to basically build it up so I can ride it and add on parts as necessary. And the brakes seem to work, I'm going to oil them up and derust any small parts that need to be derusted when I take the bike apart and what not. The bike for the most part only suffers from superficial rust so it'll come off easily. The paint job though needs to be done as alot of the paint chipped off.
#23
Member
Thread Starter
Join Date: Jan 2009
Posts: 32
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What do you mean by 3-Cross and 4-Cross, like I said I'm still new haha. Also how can I tell what speed this bike is and what kind of chain it needs?
#24
Great State of Varmint
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
Look at a spoke where it comes out of the hub (center-part of the wheel). Now count how many other spokes it touches between the hub and rim. Include the one it crosses right on the hub. It likely, including the one it passes over at the hub, crosses/touches a total of either 3 or 4 other spokes before it goes into the little hole in the rim itself.
For it's present number of gears (speeds), look at the rear wheel. See that set of cogs on the rear hub? With the largest being closest to the spokes and the smallest one being furthest away from the spokes? Count the number of cogs. Now look at the where the pedals are. There is likely 2 large cogs (chainrings) there. So multiply 2 by the number of cogs in the rear. If there are 5 cogs in the rear: 2 X 5 = 10. If there are 3 big chainrings up front: 3 X 5 = 15. If 6 in the rear and 2 up front: 6 X 2 = 12. Get it?
Regards a chain, that will depend on how many gears the bike has (see above). But I can tell you now it will be an 8-Speed chain. 8-Speed chains work with 5, 6, 7, or 8 cogs in the rear. Oh yes - that cluster of cogs in the rear is called, on your bike, a freewheel. More modern bikes have what is called a cassette.
There are no stupid questions - except the one no one asked.
For it's present number of gears (speeds), look at the rear wheel. See that set of cogs on the rear hub? With the largest being closest to the spokes and the smallest one being furthest away from the spokes? Count the number of cogs. Now look at the where the pedals are. There is likely 2 large cogs (chainrings) there. So multiply 2 by the number of cogs in the rear. If there are 5 cogs in the rear: 2 X 5 = 10. If there are 3 big chainrings up front: 3 X 5 = 15. If 6 in the rear and 2 up front: 6 X 2 = 12. Get it?
Regards a chain, that will depend on how many gears the bike has (see above). But I can tell you now it will be an 8-Speed chain. 8-Speed chains work with 5, 6, 7, or 8 cogs in the rear. Oh yes - that cluster of cogs in the rear is called, on your bike, a freewheel. More modern bikes have what is called a cassette.
There are no stupid questions - except the one no one asked.
Last edited by Panthers007; 01-16-09 at 06:18 PM.
#25
Member
Thread Starter
Join Date: Jan 2009
Posts: 32
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks, does the amount of crossover spokes do anything for performance or is it aesthetic only? And my free wheel is rusted, but its superficial rusting and it still works, should I submerge it in a de-rusting solution for a bit or just buy a new free wheel? Also, can I put a cassette on this bike if I wanted to, and whats the difference between cassettes and freewheels? Haha sorry for all the questions