What era is this stem from? AVA. Death Stem?
01-19-11, 04:01 PM
#1
Senior Member
Thread Starter
What era is this stem from? AVA. Death Stem?
https://cgi.ebay.com/AVA-Stem-Classic...item41561cf415
considering this for a build (68/69 LeJeune), but not sure if it would be somewhat period correct.
22mm base? to fit a french headset/fork.
is this a "death stem" model, with 2 slots?
alex
considering this for a build (68/69 LeJeune), but not sure if it would be somewhat period correct.
22mm base? to fit a french headset/fork.
is this a "death stem" model, with 2 slots?
alex
01-19-11, 04:06 PM
#2
Senior Member
Join Date: Jul 2010
Location: Somewhere Between The Beginning And The End
Posts: 1,995
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
22.0mm is correct for a French stem, but I thought they all had a 25.0mm clamp area, but I could be wrong......
Likes For Capecodder:
01-19-11, 04:19 PM
#3
Senior Member
shnibop,
I have a very similar AVA stem that NLerner traded me. He told me it was not a "death stem". I trust him. The clamp bolt design is just like the one to which you linked. I did not measure that stem's clamp area, but it has a Japanese randonneur bar in it as we speak. I can only assume that that bar has a 25.4mm diameter. I have seen more modern French stems with 25.4mm clamps and, of course, Cinelli sold stems with 22.0 diameters that accepted a 26.4mm handlebar.
I have a very similar AVA stem that NLerner traded me. He told me it was not a "death stem". I trust him. The clamp bolt design is just like the one to which you linked. I did not measure that stem's clamp area, but it has a Japanese randonneur bar in it as we speak. I can only assume that that bar has a 25.4mm diameter. I have seen more modern French stems with 25.4mm clamps and, of course, Cinelli sold stems with 22.0 diameters that accepted a 26.4mm handlebar.
__________________
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
Last edited by ColonelJLloyd; 01-19-11 at 04:24 PM.
01-19-11, 04:21 PM
#4
Senior Member
Join Date: Dec 2005
Posts: 17,146
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3803 Post(s)
Liked 6,637 Times
in
2,602 Posts
You trusted me?! Bwahahahahahahah!
The AVA death stem has an open back and lots of hollowness. From Sheldon Brown:
Neal
The AVA death stem has an open back and lots of hollowness. From Sheldon Brown:
Neal
01-19-11, 04:32 PM
#5
Senior Member
So the original stem from my '72 Jeunet "has a reputation for failure and should be replaced immediately"? But I polished it and everything. It has an opening in the back showing it's hollowness. I think it's an Atax, though. It has a little star on it.
__________________
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
01-19-11, 04:39 PM
#6
Senior Member
Join Date: Dec 2005
Posts: 17,146
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3803 Post(s)
Liked 6,637 Times
in
2,602 Posts
Yes, send it to me immediately for proper disposal. In fact, don't even remove it from the bike--just send the whole thing.
Neal
Neal
01-19-11, 04:55 PM
#8
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,508
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2420 Post(s)
Liked 4,381 Times
in
2,090 Posts
All variants of AVA stems w/single expander cutouts and no relief holes are destined to fail at the quill. This includes the 1980's variants that have a revised clamp design.
Late 1970's and 1980's ATAX (Cinelli 1A-copy) stems often have voids and are prone to cracks.
-Kurt
Late 1970's and 1980's ATAX (Cinelli 1A-copy) stems often have voids and are prone to cracks.
-Kurt
__________________
01-19-11, 05:01 PM
#10
Senior Member
__________________
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
01-19-11, 05:42 PM
#11
Senior Member
Join Date: Mar 2005
Location: Pinole, CA, USA
Posts: 17,392
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 443 Post(s)
Likes: 0
Liked 27 Times
in
25 Posts
Sheldon Brown said that all of the AVA stuff has a reputation for breaking and should be replaced. That includes AVA bars. He didn't restrict it to the particular style in the picture. I also saw in an old thread where he said that all French stems should be replaced. I'm not willing to go that far.
01-19-11, 06:08 PM
#13
French threaded
Join Date: Aug 2008
Location: Portland, OR.
Posts: 1,199
Bikes: many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
I took the picture that is on velobase of a cracked death stem. At least I think its still up.
Sheldons reference has been previously disregaurded as a safty sentiment only. - if you don't know if its dangerous, you should replace it just to be careful.
Aside from this, I have only seen failure in the 2-slot versions. I use (and occasionaly inspect) an AVA stem with 25.4 clamp and one slot. Also I have never heard of the later "open-face" AVA stem having any issue.
Sheldons reference has been previously disregaurded as a safty sentiment only. - if you don't know if its dangerous, you should replace it just to be careful.
Aside from this, I have only seen failure in the 2-slot versions. I use (and occasionaly inspect) an AVA stem with 25.4 clamp and one slot. Also I have never heard of the later "open-face" AVA stem having any issue.
01-19-11, 06:10 PM
#14
Ellensburg, WA
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 457 Times
in
160 Posts
Here's a link to GitaneUSA about French death stems. No photos of the AVA but some good info.
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
01-19-11, 06:11 PM
#15
Senior Member
Join Date: Jun 2008
Location: SoCal
Posts: 1,880
Bikes: Lemond, Gios, Fuji, Trek, too many to write
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Cool. I"ve been reading about it and I just happen to have a quill 22.2 stem that I can sand down. But I want it to have the original look. I probably won't be hammering on the bike anytime soon.
That's good to know though.
That's good to know though.
01-19-11, 06:32 PM
#16
01-19-11, 06:42 PM
#17
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,508
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2420 Post(s)
Liked 4,381 Times
in
2,090 Posts
01-19-11, 06:55 PM
#18
Ellensburg, WA
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 457 Times
in
160 Posts
Agreed - just provided as input. It's more prudent to periodically check the stems to make sure issues aren't developing.
I would agree with you that I wouldn't go as far as Sheldon did with his opinion either.
I would agree with you that I wouldn't go as far as Sheldon did with his opinion either.
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
01-19-11, 06:58 PM
#19
Cottered Crank
Join Date: Aug 2010
Location: Chicago
Posts: 3,401
Bikes: 1954 Raleigh Sports 1974 Raleigh Competition 1969 Raleigh Twenty 1964 Raleigh LTD-3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 11 Times
in
7 Posts
Sheldon Brown said that all of the AVA stuff has a reputation for breaking and should be replaced. That includes AVA bars. He didn't restrict it to the particular style in the picture. I also saw in an old thread where he said that all French stems should be replaced. I'm not willing to go that far.
01-19-11, 07:14 PM
#20
Full Member
Join Date: Apr 2005
Posts: 442
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 31 Post(s)
Liked 73 Times
in
29 Posts
I have seen a number of cracked and broken stems of various brands.There is always a lot of talk about the so called Ava death stems. Considering the frequency that these supposedly fail you would think there would be a lot of pictures,but i seldom see any,so I tend to be a bit skeptical. As a matter of fact there seems to be little agreement on which models are the death stems.However here are a few pics of an Ava stem that has a scary looking crack.This style which has the vertical bolt is the style which i tend to be wary of.I do not know if this style is the supposed death stem.
01-19-11, 07:36 PM
#21
Senior Member
Join Date: Apr 2009
Location: Detroit
Posts: 10,303
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 41 Times
in
33 Posts
My death stem has not cracked in 40 years. That could change tomorrow, but a lot of other things could happen too.
__________________
- Auchen
- Auchen
01-19-11, 07:50 PM
#22
is just a real cool dude
Join Date: Aug 2010
Location: The Thumb, MI
Posts: 3,162
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 30 Post(s)
Likes: 0
Liked 27 Times
in
11 Posts
I used one of these on my wife's Bottecchia mixte build. Now you guys got me all worried. I even polished it all up.
01-19-11, 07:53 PM
#23
Senior Member
Join Date: Jul 2009
Posts: 11,128
Bikes: 1986 Alan Record Carbonio, 1985 Vitus Plus Carbone 7, 1984 Peugeot PSV, 1972 Line Seeker, 1986(est.) Medici Aerodynamic (Project), 1985(est.) Peugeot PY10FC
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 150 Post(s)
Likes: 0
Liked 34 Times
in
27 Posts
It only takes a few people saying "Death stems", "Death fork", "Death Frame"....."Death bike", then all of the sudden it's taken as fact by everyone and their kittens! I suspect that they might have cracked as shown but most likely most of them did not crack any further than that for most people.
Chombi
Chombi
Last edited by Chombi; 01-20-11 at 02:12 AM.
01-19-11, 07:57 PM
#24
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,508
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2420 Post(s)
Liked 4,381 Times
in
2,090 Posts
COMING TO A BICYCLE SHOP NEAR YOU:
The all NEW Titan Teledyne with Viscount Aerospace Pro aluminum fork. Fitted with AVA stem and bars, Simplex Prestige front and rear derailers, non-stress-relieved Record crankarms, drillium seatpost, and no warranty.
Please bring a valid $1,000,000 life insurance policy with you when you make your purchase.
-Kurt
The all NEW Titan Teledyne with Viscount Aerospace Pro aluminum fork. Fitted with AVA stem and bars, Simplex Prestige front and rear derailers, non-stress-relieved Record crankarms, drillium seatpost, and no warranty.
Please bring a valid $1,000,000 life insurance policy with you when you make your purchase.
-Kurt
__________________
01-19-11, 08:09 PM
#25
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,881
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1452 Post(s)
Liked 2,185 Times
in
961 Posts
Here's the same stem mounted to my '62 Continental. Still smiling after 49 years. 
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
