My first Peugeot!
#1
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Wenatchee, WA
Posts: 18
Bikes: 1975 Peugeot U08, 2008 Specialized Hardrock, 2010 Trek Scratch 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My first Peugeot! (Finished!!!)
Hello everyone! New to the forums here. Seemed like a great place for some info. Now onto the bike...
So I picked this 1975 Peugeot U08 up today for 30 bucks. Been neglected for the last 25 or so years they said, but it seemed restorable so I took it home.
I guess my first question is, Should I try and rebuild the plastic/metal Simplex derailleur or is there something better that i could replace it with that is budget friendly? There isn't any tension and a couple of the teeth are missing from the little guide wheels on it.
Here's some pics of the bike.
So I picked this 1975 Peugeot U08 up today for 30 bucks. Been neglected for the last 25 or so years they said, but it seemed restorable so I took it home.
I guess my first question is, Should I try and rebuild the plastic/metal Simplex derailleur or is there something better that i could replace it with that is budget friendly? There isn't any tension and a couple of the teeth are missing from the little guide wheels on it.
Here's some pics of the bike.
Last edited by XandX2005; 04-08-11 at 09:53 AM.
#3
Banned.
Join Date: May 2010
Location: Snohomish, WA.
Posts: 2,997
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 469 Post(s)
Liked 2,439 Times
in
646 Posts
Welcome to the forum, Xand. Good project bike. Use the search engine here on the forum. I've found it to be pretty helpful. You will get some good advice here as well.
Last edited by Roger M; 03-28-11 at 08:14 PM.
#4
Senior Member
Join Date: Jan 2011
Location: phoenix
Posts: 513
Bikes: Miyata 110, Schwinn super le tour 12.2, Schwinn super sport, Lemond Zurich
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I don't know if it is the weather warming up or what, but some people seem to be getting a little snippy. The uo-8 is a perfectly fine bike, but those plastic derailleurs are crap if they are even a little cracked they are prone to fail. if you go on Ebay you can get a quite nice set of better derailleurs for not much money. if you do a google search on bikeforum vintage derailleurs you can make a pretty educated decision about what the people here like for a great price.
#7
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 21,324
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy 4 Trek Checkpoint ALR-5 Viscount Aerospace Pro Colnago Classic Rabobank Schwinn Waterford PMount Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Mentioned: 58 Post(s)
Tagged: 0 Thread(s)
Quoted: 3059 Post(s)
Liked 6,378 Times
in
3,691 Posts
Vintage Suntour derailleurs, like the X GT Luxe, are a good choice for a replacement.
__________________
#8
Senior Member
Join Date: Oct 2010
Location: Minnesota- the frozen tundra
Posts: 1,947
Bikes: 1977 Raleigh Super Grand Prix, 1976 Gitane Tour de France
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Great bike for that money, service it and upgrade the derailleurs and you have a really nice ride there.
#9
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,765
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1384 Post(s)
Liked 1,294 Times
in
819 Posts
Yup -- Shimano Titlist in front, SunTour Cyclone II in back, w/ those wonderful SunTour ratchet barcons.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#10
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,765
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1384 Post(s)
Liked 1,294 Times
in
819 Posts
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#11
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,672
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1370 Post(s)
Likes: 0
Liked 1,743 Times
in
934 Posts
Actually, in my opinion, the Simplex derailleurs are just fine, and work well. However, they are prone to catastrophic failure, the front one breaking in half and, often times, feeding itself into the crank rings. Messy.
The recommendation to go to a Suntour transmission is a good one.
Since you are new to the interest of vintage bicycle ownership, you might also be interested in spending a bit of time at a website aimed at helping people find and street restore old bikes. Please feel free to visit, MY "TEN SPEEDS" and, perhaps, save yourself some money and effort as you build up that nice old Peugeot.
Hope this is a help.
The recommendation to go to a Suntour transmission is a good one.
Since you are new to the interest of vintage bicycle ownership, you might also be interested in spending a bit of time at a website aimed at helping people find and street restore old bikes. Please feel free to visit, MY "TEN SPEEDS" and, perhaps, save yourself some money and effort as you build up that nice old Peugeot.
Hope this is a help.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#12
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Wenatchee, WA
Posts: 18
Bikes: 1975 Peugeot U08, 2008 Specialized Hardrock, 2010 Trek Scratch 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for the advice fellas.
I just got done tearing through the hubs, and both are toast. Thinking the bottom bracket and headset will need to be replaced as well.
Not sure if I want to keep the wheels and get new hubs, or just get a new wheelset.... never built a wheel before let alone trued one, but I guess theres a first for everything. If worse comes to worse, there's always the LBS.
I just got done tearing through the hubs, and both are toast. Thinking the bottom bracket and headset will need to be replaced as well.
Not sure if I want to keep the wheels and get new hubs, or just get a new wheelset.... never built a wheel before let alone trued one, but I guess theres a first for everything. If worse comes to worse, there's always the LBS.
#13
Senior Member
Join Date: Jan 2011
Location: phoenix
Posts: 513
Bikes: Miyata 110, Schwinn super le tour 12.2, Schwinn super sport, Lemond Zurich
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
the good ole chromed steel ones? In my opinion I would get a new wheel set. and I feel your pain, my first Peugeot was a pl-8 that is still sitting in the corner with the non drive side crank arm half drilled out because I couldn't figure out how to get the cotters out.
#15
Senior Member
Join Date: Oct 2010
Location: Minnesota- the frozen tundra
Posts: 1,947
Bikes: 1977 Raleigh Super Grand Prix, 1976 Gitane Tour de France
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Thanks for the advice fellas.
I just got done tearing through the hubs, and both are toast. Thinking the bottom bracket and headset will need to be replaced as well.
Not sure if I want to keep the wheels and get new hubs, or just get a new wheelset.... never built a wheel before let alone trued one, but I guess theres a first for everything. If worse comes to worse, there's always the LBS.
I just got done tearing through the hubs, and both are toast. Thinking the bottom bracket and headset will need to be replaced as well.
Not sure if I want to keep the wheels and get new hubs, or just get a new wheelset.... never built a wheel before let alone trued one, but I guess theres a first for everything. If worse comes to worse, there's always the LBS.
#16
What??? Only 2 wheels?
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,452
Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10
Mentioned: 189 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 645 Times
in
232 Posts
Nice bike. Should be a good rider.
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
#17
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Wenatchee, WA
Posts: 18
Bikes: 1975 Peugeot U08, 2008 Specialized Hardrock, 2010 Trek Scratch 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Well, the bearings on one side of the front hub are a little pitted along with the race, but the other side of that hub is fine. I guess I can grease em up and try it out. Although I'd have to find a new nut for the axle, it cracked and part of it just fell off. From what I've read and it being french threads and all, i'd probably have to special order such a thing. Here's a pic
As far as the back goes, they are a little pitted as well. The cassette/freewheel sounds crunchy as hell, but I have no idea of how to take that off of the hub to clean it. The actual cassette rings have a lot of surface rust and would need a good sandblasting or wire wheeling to get that off.
I could try to grease up the bearings and see if it will work, but I'm 6'5" and 230lbs, not sure how long they'd last under the stress my body would put on them. That's why I figured I'd just toss em.
As far as the back goes, they are a little pitted as well. The cassette/freewheel sounds crunchy as hell, but I have no idea of how to take that off of the hub to clean it. The actual cassette rings have a lot of surface rust and would need a good sandblasting or wire wheeling to get that off.
I could try to grease up the bearings and see if it will work, but I'm 6'5" and 230lbs, not sure how long they'd last under the stress my body would put on them. That's why I figured I'd just toss em.
Last edited by XandX2005; 03-29-11 at 01:59 AM.
#18
Bicycle Repair Man !!!
The UO8 is a nice bike when you address it's short comings like the Simplex derailleurs and the steel wheels and once you do that you will have a fine riding and very comfortable bicycle that is of a reasonable weight.
There is an entire thread devoted to the lowly UO8 and it's siblings.
https://www.bikeforums.net/showthread...ation-thread.?
There is an entire thread devoted to the lowly UO8 and it's siblings.
https://www.bikeforums.net/showthread...ation-thread.?
Last edited by Sixty Fiver; 03-29-11 at 01:59 AM.
#19
Senior Member
Join Date: Jan 2011
Location: phoenix
Posts: 513
Bikes: Miyata 110, Schwinn super le tour 12.2, Schwinn super sport, Lemond Zurich
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
they make a sealed bottom bracket with french threading https://www.speedgoat.com/Catalog.aspx/Browse?Prod=21254 might be something to look into. and then you can nix those dang cottered cranks. Also the way I see it, even if you sink this cash into the uo-8 if at some point you move up to the px-10 you can transfer most of this stuff over.
#20
Bicycle Repair Man !!!
Velo Orange also sells a French threaded cartridge bottom bracket that has received very good reviews.
#21
Senior Member
Join Date: Mar 2005
Location: Pinole, CA, USA
Posts: 17,414
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 443 Post(s)
Likes: 0
Liked 27 Times
in
25 Posts
Your hubs are bad, you have galvanized spokes and steel rims. You should get a replacement wheelset. It will be cheaper that rebuilding what you have and it will be a huge improvement.
#22
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Wenatchee, WA
Posts: 18
Bikes: 1975 Peugeot U08, 2008 Specialized Hardrock, 2010 Trek Scratch 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What do you guys recommend for a wheel set that's really budget friendly? And where can I get a new cassette for the new/used wheels?
#23
Senior Member
Join Date: Apr 2009
Location: Detroit
Posts: 10,327
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 39 Times
in
31 Posts
Harris Cyclery sells 27" Sun M-13 with sealed bearings that are purportedly a good choice , (if you can't locate some nice old alloy Weinmanns, Arayas, or Mavics in good condition). They're 126 O.L.D. but you can generally fit them in with a little effort.
5-spd & 6 spd HG Freewheels are available economically at Niagara cycle. They have the best prices on the expendables you'll need too, such as housing, cables etc)
The Peugeot U08 is a nice riding bike if you take the minimal steps needed to upgrade it. (Wheels and DRs)
Even the rear DR is pretty good - if you replace the jockey wheels (the most frangible part). The front though is junk.
You have a very worthy project at a good price there - and a great color too.
5-spd & 6 spd HG Freewheels are available economically at Niagara cycle. They have the best prices on the expendables you'll need too, such as housing, cables etc)
The Peugeot U08 is a nice riding bike if you take the minimal steps needed to upgrade it. (Wheels and DRs)
Even the rear DR is pretty good - if you replace the jockey wheels (the most frangible part). The front though is junk.
You have a very worthy project at a good price there - and a great color too.
__________________
- Auchen
- Auchen
#24
Dolce far niente
Join Date: Dec 2004
Location: Northern CA
Posts: 10,834
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 15 Times
in
13 Posts
Wheels, derailleurs, bottom bracket, cables, tires, saddle, tape..... Careful - you've got a real money pit on your hands if you have to buy everything retail. And that bb is cottered, so if you replace it (and you should, IMO) you'll need a new crank, too.
There's nothing minimal about this particular one - you've bit off a whole lot to chew. Take no half measures here. The first thing you need to do is to strip this one down to the frame, and assess what's what and calculate the cost of restoring it to serviceability.
There's nothing minimal about this particular one - you've bit off a whole lot to chew. Take no half measures here. The first thing you need to do is to strip this one down to the frame, and assess what's what and calculate the cost of restoring it to serviceability.
__________________
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
"Love is not the dying moan of a distant violin, it’s the triumphant twang of a bedspring."
S. J. Perelman
Last edited by bigbossman; 03-29-11 at 11:07 AM.
#25
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Wenatchee, WA
Posts: 18
Bikes: 1975 Peugeot U08, 2008 Specialized Hardrock, 2010 Trek Scratch 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Wheels, derailleurs, bottom bracket, cables, tires, saddle, tape..... Careful - you've got a real money pit on your hands if you have to buy everything retail. And that bb is cottered, so if you replace it (and you should, IMO) you'll need a new crank, too.
There's nothing minimal about this particular one - you've bit off a whole lot to chew. Take no half measures here. The first thing you need to do is to strip this one down to the frame, and assess what's what and calculate the cost of restoring it to serviceability.
There's nothing minimal about this particular one - you've bit off a whole lot to chew. Take no half measures here. The first thing you need to do is to strip this one down to the frame, and assess what's what and calculate the cost of restoring it to serviceability.
1) The stem seems to be rusted into the tube it slides down into. I spprayed some wd-40 around the base of it, hopefully it loosens up.
2) The crank arm bolts on both sides aren't budging at all. Tried giving them a nice tap to punch them out the other side, but no movement. Not sure what's going on here. Any tips on how to knock it loose?