Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Upgrading 27in wheels

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Upgrading 27in wheels

Old 06-02-11, 07:49 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Aug 2010
Location: Greenfield, IN
Posts: 53

Bikes: 2011 Raleigh Revenio 3.0, 1986 Centurion Accodo RS

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Upgrading 27in wheels

I have a 83 Centurion Sport DLX that has chromed steel wheels on it. I would like to make it more useable in less than ideal conditions. Would it make sense to just rebuild the wheels with a new aluminum rim (Sun CR18 36h) or replace the wheelset? The current rims have an ERD of 618mm just like the CR18 rims.
blue303 is offline  
Old 06-02-11, 07:54 PM
  #2  
Senior Member
 
Join Date: Aug 2009
Location: Madison, WI
Posts: 3,473
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 363 Post(s)
Liked 28 Times in 22 Posts
I'd say it's really kind of up to what you want out of them. Do they have nice(r) hubs? Nicer stainless or low end spokes? Either way, I suggest you check out craigslist if you haven't already, and put up a WTB if you don't have that great of hubs/spokes/whatever and see if anyone in your area has any aluminum 27s laying around. I've had good luck with WTB ads on CL. Just put it in the bikes "for sale" section with WTB at the first of the title. "WTB: Aluminum 27" Wheels" or something like that. Otherwise, depending on your brake reach, you might even be able to use a set of aluminum 700c wheels, which would expand your available options even more.

This being all with you building the wheels up yourself. If you're paying someone else to do it, definitely just buy new wheels.

Last edited by 3speed; 06-02-11 at 08:01 PM.
3speed is offline  
Old 06-02-11, 07:56 PM
  #3  
Senior Member
 
Join Date: Apr 2010
Location: Forked River, NJ
Posts: 715

Bikes: 1973 Peugeot UE-8, 1985 Schwinn Voyageur, 2010 Trek 1.2, 2012 Bianchi Siempre

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Personally, I'd replace the entire wheelset. I'd also consider replacing the brakes. But keep all the originals in case you want to sell the bike.

JMO.
Beach Comber is offline  
Old 06-02-11, 07:58 PM
  #4  
Senior Member
 
Alan Edwards's Avatar
 
Join Date: Apr 2011
Location: Lancaster,CA the desert north of Los Angeles
Posts: 701

Bikes: 84' Ciocc, 79' Shogun 1000, 76' KHS Gran Sport, 96' Schwinn Super Sport,

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I don't know where you live but start looking for a set of used wheels or singles. The cheapest way to change wheels is used and wrecked. I have a set of Mavic Helium sew-ups from 1996, the front wheel has scratches from an accident, paid 160$. Learn to fix and lace bent rims and you can have wheels for free.
Alan Edwards is offline  
Old 06-02-11, 08:12 PM
  #5  
Cottered Crank
 
Amesja's Avatar
 
Join Date: Aug 2010
Location: Chicago
Posts: 3,493

Bikes: 1954 Raleigh Sports 1974 Raleigh Competition 1969 Raleigh Twenty 1964 Raleigh LTD-3

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 11 Times in 7 Posts
I'd build new wheels but that is because I like doing it. Like 3speed said if you are paying someone else to do it then it just does not make sense as used 27" alloy wheelsets are not hard to come by. I picked up a complete 27" wheelset at a garage sale a couple weeks ago for $3 each -so $6 for the set. Of course there were a couple of broken spokes on them (on the rear it was on the FW side and harder to replace) which is probably why the PO stopped using them. Simple fix for someone who has tools and knowledge -and a lot cheaper than buying or building them. If this were a 590 wheelset or something wierd then building a wheel makes more sense as the price of wheelsets gets to be a lot more and used alloy just are not available.
Amesja is offline  
Old 06-03-11, 10:02 AM
  #6  
Senior Member
 
Pompiere's Avatar
 
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,417

Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans

Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 516 Post(s)
Liked 925 Times in 488 Posts
I agree that garage sales is the least expensive way to get decent wheels. A lot of times, you can find a lesser bike that has good wheels for less than what the wheels would have cost by themselves. Swap out the wheels and resell the bike with your old wheels and you could have your new wheels for free.

I have also rebuilt wheels with Sun rims, and if your spokes are in good shape, that is another inexpensive option. It isn't hard to lay the new rim next to the old one and move one spoke at a time. If you start by screwing all the nipples on the same number of turns, the wheel trues up pretty quick.
Pompiere is offline  
Old 06-07-11, 06:04 PM
  #7  
Senior Member
Thread Starter
 
Join Date: Aug 2010
Location: Greenfield, IN
Posts: 53

Bikes: 2011 Raleigh Revenio 3.0, 1986 Centurion Accodo RS

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I'm going to try to find a wheelset locally. There is a swap meet this weekend nearby. I might luck out and find a set there. If I were to build a set I would just do it myself.
blue303 is offline  
Old 06-07-11, 07:31 PM
  #8  
What??? Only 2 wheels?
 
jimmuller's Avatar
 
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,452

Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10

Mentioned: 189 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 645 Times in 232 Posts
If you already have the spokes (and you are sure they are the right size) building the wheel is easy. The Harris Cyclery website has a very nice article describing it. I'd say it depends on how good the current hubs are. If they are trash then don't bother. If the bearing races and spoke holes in the flanges are good then do it.

The Sun CR18 is a nice medium width rim, the M13-II is also nice, narrower. Neither is the hardest aluminum in the world but they are quite useful and pretty. The choice depends on what tire width you want. I am running sets of 28mm and 25mm Pasela GTs on the M13-II, but the 28mm is about as wide as I'd go. If I wanted to run 32mm I'd definitely choose the CR18 instead.
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
jimmuller is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
intransit1217
Cyclocross and Gravelbiking (Recreational)
12
04-06-19 03:05 PM
remotelocal
Mountain Biking
0
05-03-15 07:24 PM
Boblablah
Singlespeed & Fixed Gear
7
04-14-10 05:44 AM
C_Heath
Mountain Biking
21
12-12-09 10:14 AM
csmo
Long Distance Competition/Ultracycling, Randonneuring and Endurance Cycling
13
12-05-09 02:43 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.