to destroy a columbus frame or not ???
#1
Senior Member
Thread Starter
to destroy a columbus frame or not ???
hey guys
I have just bought this Fiori alphma road bike , it is columbus sl steel frame in rough shape due to dent but rideable .. I paid 250.00$ for this bike because it has Dura ace brakes set , rear derailer , and down tube levers and the camy headset ,front derailer and campy wheelset. my problem is the top tube has a large rusted dent about 3 inches long and that wouldnt be a problem but the Campy seatpost is seized and unmovable without damaging it , my plan was to remove all saveable parts and cut the seatpost out saving it too. i will post pics later today but tell me what you would do ??
thanks Pinch
I have just bought this Fiori alphma road bike , it is columbus sl steel frame in rough shape due to dent but rideable .. I paid 250.00$ for this bike because it has Dura ace brakes set , rear derailer , and down tube levers and the camy headset ,front derailer and campy wheelset. my problem is the top tube has a large rusted dent about 3 inches long and that wouldnt be a problem but the Campy seatpost is seized and unmovable without damaging it , my plan was to remove all saveable parts and cut the seatpost out saving it too. i will post pics later today but tell me what you would do ??
thanks Pinch
#2
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1443 Post(s)
Liked 1,062 Times
in
787 Posts
Without pics it's hard to judge, but I'd try to save a (usable) frame more than a Campy seatpost. Unless the dent is so bad that the tubing is cracked, it probably hasn't terminated the frame. There are ways to get out a post without completely ruining it, too...but it's more effort than a Sawzall (plus you'd still have a challenge to cut off the seat tube without marring that post, and chances are good that corrosion has already pock marked it).
#3
Riding like its 1990
I think you should take the slow route on getting that seatpost out. I destroyed a frame once and I still regret it because I've since learned a few more tricks and realize that frames are more resilient, seized items are movable with patience.
IF YOU DO destroy the frame, I'd love to get the lug areas from you with about 4" of tubing still attached. I can pay shipping, that way at least you're not just throwing it away.
IF YOU DO destroy the frame, I'd love to get the lug areas from you with about 4" of tubing still attached. I can pay shipping, that way at least you're not just throwing it away.
#4
12345
Join Date: Feb 2008
Location: south france
Posts: 1,240
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'l swap you a perfect campy seat post identical to yours for the rusty frame and stuck seat post.
That will save you cutting up the frame to try and get the post out.
deal or no deal?
That will save you cutting up the frame to try and get the post out.
deal or no deal?
#6
Senior Member
Thread Starter
with a little hard work and luck I saved the frame and the seatpost !! here are some pics . now will I be able to ride a Pink Bike in public **********this is the bike as it sits I still have to clean it up!!
#7
Senior Member
wow, i'm glad that frame didn't get destroyed for that seat post... what is that a chorus/athena/victory aero post worth ~$50?
good job getting that post out. now go ride one of your many, recently acquired, nice nice bikes!
good job getting that post out. now go ride one of your many, recently acquired, nice nice bikes!
#8
Senior Member
Thread Starter
I am heading out right now. I sure love summer !!!
#9
Senior Member
Join Date: Aug 2005
Location: ontario
Posts: 2,234
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My initial thought was it would be no real loss, but now that I see the photos wow! never knew a fiori that good existed. Its sad its dented though.
Last edited by divineAndbright; 06-26-11 at 05:48 PM.
#11
Senior Member
Thread Starter
I am starting to get to work cleaning this frame and I was wondering if anyone can tell me about this set of letters stamped on the top of the BB housing ??
#13
Senior Member
Thread Starter
Iam sure glad I didnt destroy this frame the bike rides smooth and fast. all I have to do is tough up paint work !!
#15
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,482
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 183 Times
in
118 Posts
RGF is the manufacturer of the BB shell. They were a supplier to many framebuilders.
__________________
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
72 Frejus (for sale), Holdsworth Record (for sale), special CNC & Gitane Interclub / 74 Italvega NR (for sale) / c80 French / 82 Raleigh Intl MkII f&f (for sale)/ 83 Trek 620 (for sale)/ 84 Bruce Gordon Chinook (for sale)/ 85 Ron Cooper / 87 Centurion IM MV (for sale) / 03 Casati Dardo / 08 BF IRO / 09 Dogma FPX / 09 Giant TCX0 / 10 Vassago Fisticuff
#16
PanGalacticGargleBlaster
Join Date: Apr 2009
Location: Smugglers Notch, Vermont
Posts: 7,531
Bikes: Upright and Recumbent....too many to list, mostly Vintage.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
I got really aggravated last week and took a sledge hammer to a Giant ladies bike.
Felt GREAT.
I gotta get rid of that frame now though....it kinda makes me feel guilty when i look at it.
Felt GREAT.
I gotta get rid of that frame now though....it kinda makes me feel guilty when i look at it.
__________________
--Don't Panic.
--Don't Panic.
Last edited by Zaphod Beeblebrox; 06-28-11 at 03:39 PM.