Cold setting: If you're not going to do it yourself. . .
#1
Fahrrad Mama
Thread Starter
Cold setting: If you're not going to do it yourself. . .
Hello, folks. Please excuse me if this has been touched on before. I seem to be sub-awesome at rocking the search. I'm considering having the Mistral I recently bought cold set from 120 to 126. Most of the threads I've found on the subject have at least one LBS horror story. So I ask, how does one determine if the LBS is qualified?
#4
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,524
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 964 Times
in
628 Posts
6mm should be able to squeeze in, your choice.
As far as finding a good shop, ask them if they have any spare parts for older bikes. When they give you the spiel that any bike older than five years is obsolete (happened to me), turn around and leave.
As far as finding a good shop, ask them if they have any spare parts for older bikes. When they give you the spiel that any bike older than five years is obsolete (happened to me), turn around and leave.
#5
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26402 Post(s)
Liked 10,374 Times
in
7,203 Posts
My own advice would be to not do this.
It is one of those jobs that everyone seems
to think is easily done (why, back in the day...)
and most often ****ed up. The major issues
you will encounter are, first, that most shops
just don't like to do this kind of stuff any more,
and two, they don't do it often enough to
appreciate the frame alignment problems you
can induce by bending one side or the other
too much in one direction, i.e. they both need to
spread outboard equally.
Why, exactly do you want to do this?
Look up the string technique for checking frame
alignment, and get some idea of how to check this
yourself. Good luck.
It is one of those jobs that everyone seems
to think is easily done (why, back in the day...)
and most often ****ed up. The major issues
you will encounter are, first, that most shops
just don't like to do this kind of stuff any more,
and two, they don't do it often enough to
appreciate the frame alignment problems you
can induce by bending one side or the other
too much in one direction, i.e. they both need to
spread outboard equally.
Why, exactly do you want to do this?
Look up the string technique for checking frame
alignment, and get some idea of how to check this
yourself. Good luck.
__________________
#6
Fahrrad Mama
Thread Starter
My own advice would be to not do this.
It is one of those jobs that everyone seems
to think is easily done (why, back in the day...)
and most often ****ed up. The major issues
you will encounter are, first, that most shops
just don't like to do this kind of stuff any more,
and two, they don't do it often enough to
appreciate the frame alignment problems you
can induce by bending one side or the other
too much in one direction, i.e. they both need to
spread outboard equally.
Why, exactly do you want to do this?
Look up the string technique for checking frame
alignment, and get some idea of how to check this
yourself. Good luck.
It is one of those jobs that everyone seems
to think is easily done (why, back in the day...)
and most often ****ed up. The major issues
you will encounter are, first, that most shops
just don't like to do this kind of stuff any more,
and two, they don't do it often enough to
appreciate the frame alignment problems you
can induce by bending one side or the other
too much in one direction, i.e. they both need to
spread outboard equally.
Why, exactly do you want to do this?
Look up the string technique for checking frame
alignment, and get some idea of how to check this
yourself. Good luck.
#7
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,751 Times
in
938 Posts
Take some time to get a feel for Frame and Fork Preparation.
Then, apply what you have learned and String the Stays. This is how I center the stays and all you have to do is apply the same ideas to spreading your stays. There is always a risk of damaging something but if you are careful, it should go OK.
If you can use a tape measure and a lever, you are in good shape. If you are mechanically inclined, you should have no problem. If you don't know how to use a tape measure, you might not want to tackle the task yourself.
I know this all looks very crude but it does work and I have never had a problem centering the stays. I also never spread stays, preferring to keep my bicycle frame sets as close to original as I possibly can. But that is just me. Lots of folks have no problem with altering a vintage road bicycle frame set.
Then, apply what you have learned and String the Stays. This is how I center the stays and all you have to do is apply the same ideas to spreading your stays. There is always a risk of damaging something but if you are careful, it should go OK.
If you can use a tape measure and a lever, you are in good shape. If you are mechanically inclined, you should have no problem. If you don't know how to use a tape measure, you might not want to tackle the task yourself.
I know this all looks very crude but it does work and I have never had a problem centering the stays. I also never spread stays, preferring to keep my bicycle frame sets as close to original as I possibly can. But that is just me. Lots of folks have no problem with altering a vintage road bicycle frame set.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#8
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,444
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4232 Post(s)
Liked 2,947 Times
in
1,806 Posts
I've been thinking of doing this myself for cold setting a frame from 120 to 130 mm. Kind of scared about it. Have thought about asking a shop how much they'd charge as I'm assuming I'll have to go to them to get the dropouts aligned anyway, right? Well that and I'm car free and lack a long 2x4, though I've been thinking about attempting buying one at the local home depot and riding it home. Not sure how that'll go. In my case it's a pretty abuse frame that would otherwise not be used. We'll see how it all goes down.
__________________
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),1990 Concorde Aquila(hit by car while riding), others in build queue "when I get the time"
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),
Last edited by himespau; 01-10-12 at 02:05 PM.
#9
Senior Member
Join Date: Nov 2009
Posts: 589
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've been thinking of doing this myself for cold setting a frame from 120 to 130 mm. Kind of scared about it. Have thought about asking a shop how much they'd charge as I'm assuming I'll have to go to them to get the dropouts aligned anyway, right? Well that and I'm car free and lack a long 2x4, though I've been thinking about attempting buying one at the local home depot and riding it home. Not sure how that'll go. In my case it's a pretty abuse frame that would otherwise not be used. We'll see how it all goes down.
IF.. I had to try a reset on the rear.. I'd set a longish axle in with bolts on the INSIDE of the spacing.. and then turn the bolts out for expansion.. a turn to each side at a time. Loosening tightening would give a feel for how your progressing.
#10
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,444
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4232 Post(s)
Liked 2,947 Times
in
1,806 Posts
Aren't you afraid of bending/breaking the axle due to mis-aligned dropouts when you do this? Just curious because I was told that was a risk.
__________________
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),1990 Concorde Aquila(hit by car while riding), others in build queue "when I get the time"
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),
#11
Senior Member
It is a risk. I ok with taking reasonable risks and I've never broken an axle.
__________________
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
Bikes on Flickr
I prefer email to private messages. You can contact me at justinhughes@me.com
#12
Senior Member
Join Date: Dec 2010
Location: Above ground, Walnut Creek, Ca
Posts: 6,681
Bikes: 8 ss bikes, 1 5-speed touring bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 86 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
most lbs's make a go of it by selling new bikes and accessories. the repair dept, in many cases, is a necessity in order to give potential customers the confidence to buy. so i would look up a local frame builder (and you may find some good advice in the "framebuilders forum" if you post there.) to do the work. they have experience in working metal and a deep appreciation for a straight frame. or better yet, i would look into finding a good hub of the proper dimensions.
remember it's the axle that must be of the right dimensions not the hub. spacers can be your friend. you might want to take a hard look at that 120mm hub, if you have one.
remember it's the axle that must be of the right dimensions not the hub. spacers can be your friend. you might want to take a hard look at that 120mm hub, if you have one.
Last edited by hueyhoolihan; 01-10-12 at 03:07 PM.
#13
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
But back to the OP's orignal question. You can always ask the LBS for references and check them out. The other big confidence booster would be seeing a full set of Park (or other) alignment tools in the shop. Or you can just take it to the closest framebuilder, who has probably cold set just about every frame that he has built.
#14
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26402 Post(s)
Liked 10,374 Times
in
7,203 Posts
Yes, these are my concerns. Frame building is such an art, how can frame stretching be no big deal?
Anytime someone says, "Ah no problem," I fear they are just not as persnickety as I would like them to be.
I actually am not at all certain that I want to do this.
I am merely considering it as it would make finding an appropriate wheel setup a bit easier.
Anytime someone says, "Ah no problem," I fear they are just not as persnickety as I would like them to be.
I actually am not at all certain that I want to do this.
I am merely considering it as it would make finding an appropriate wheel setup a bit easier.
Much of what you find in 126 can be modified down to 120mm
pretty easily, although depending on how you work the axle
spacing issues, you may have to take some time to redish the
wheel. This is mostly what I do, and I have access to a whole
shop and a garage full of tools, so if I really wanted to cold
set a frame, I could probably do so.
I guess if you can find a shop to do this, it would be quicker
than the wheel modifications, thus cheaper. But if it were me,
I'd work the wheel angle.
__________________
#15
Bicycle Repair Man !!!
But back to the OP's orignal question. You can always ask the LBS for references and check them out. The other big confidence booster would be seeing a full set of Park (or other) alignment tools in the shop. Or you can just take it to the closest framebuilder, who has probably cold set just about every frame that he has built.
Bigger changes in spacing warrant hot setting to reduce stresses to the stays and we have re-spaced a lot of older tandems in this way to accommodate wider hubs... they tend to be far too stiff for cold setting.
With that being said, cold setting a frame to increase spacing is not a big deal if you know what you are doing and a good shop will cold set and then re-align the dropouts.
#16
Senior Member
Join Date: Nov 2009
Posts: 589
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
One lbs guy quacked about the same thing... risk etc. But going to 126 meant no bike sale there......
#17
Senior Member
Join Date: Nov 2005
Posts: 5,768
Bikes: Cinelli, Paramount, Raleigh, Carlton, Zeus, Gemniani, Frejus, Legnano, Pinarello, Falcon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
I just grab the dropouts and pull apart, measure, pull, measure. Then check center with my alignment tool and adjust as required. Then square up the dropouts and align the dropout hanger.
No big deal, really, if you have the tools. Actually, measuring and string work fine too. Any upright primate could do it.
No big deal, really, if you have the tools. Actually, measuring and string work fine too. Any upright primate could do it.
#18
curmudgineer
Join Date: Dec 2009
Location: Chicago SW burbs
Posts: 4,417
Bikes: 2 many 2 fit here
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 263 Post(s)
Liked 112 Times
in
70 Posts
I just grab the dropouts and pull apart, measure, pull, measure. Then check center with my alignment tool and adjust as required. Then square up the dropouts and align the dropout hanger.
No big deal, really, if you have the tools. Actually, measuring and string work fine too. Any upright primate could do it.
No big deal, really, if you have the tools. Actually, measuring and string work fine too. Any upright primate could do it.
#19
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,444
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4232 Post(s)
Liked 2,947 Times
in
1,806 Posts
I just grab the dropouts and pull apart, measure, pull, measure. Then check center with my alignment tool and adjust as required. Then square up the dropouts and align the dropout hanger.
No big deal, really, if you have the tools. Actually, measuring and string work fine too. Any upright primate could do it.
No big deal, really, if you have the tools. Actually, measuring and string work fine too. Any upright primate could do it.
__________________
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),1990 Concorde Aquila(hit by car while riding), others in build queue "when I get the time"
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),
#20
Junior Member
Join Date: Feb 2011
Posts: 79
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Likes: 0
Liked 9 Times
in
8 Posts
Do painters do this stuff? If you would prefer to leave the stays and just encounter difficulty every wheel change, you could align the dropouts for the wider size. I want to know if painters do this because I have to do work on curved blade forks which can get complicated.
#21
elcraft
Himespau, since we are lucky enough to have such a resource, why not take your bare frame to Harris Cyclery in West Newton. They are entusiastic about older quality frames and making them usable with newer componentry. Since you are car free, I could help you get the frame to Harris if you need to. PM me if you are interested
#22
Hopelessly addicted...
Join Date: Aug 2009
Location: Central Maryland
Posts: 4,955
Bikes: 1949 Hercules Kestrel, 1950 Norman Rapide, 1970 Schwinn Collegiate, 1972 Peugeot UE-8, 1976 Raleigh Sports, 1977 Raleigh Sports, 1977 Jack Taylor Tandem, 1984 Davidson Tandem, 2010 Bilenky "BQ" 650B Constructeur Tandem, 2011 Linus Mixte
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 10 Times
in
9 Posts
most lbs's make a go of it by selling new bikes and accessories. the repair dept, in many cases, is a necessity in order to give potential customers the confidence to buy. so i would look up a local frame builder (and you may find some good advice in the "framebuilders forum" if you post there.) to do the work. they have experience in working metal and a deep appreciation for a straight frame. or better yet, i would look into finding a good hub of the proper dimensions.
remember it's the axle that must be of the right dimensions not the hub. spacers can be your friend. you might want to take a hard look at that 120mm hub, if you have one.
remember it's the axle that must be of the right dimensions not the hub. spacers can be your friend. you might want to take a hard look at that 120mm hub, if you have one.
#23
Gone World Hepster
Join Date: Oct 2005
Location: Lincoln, NE
Posts: 1,211
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 7 Times
in
4 Posts
I've had success spreading from 120 to 126 and 126 to 130 using parts from my local ace hardware: a 10" piece of all thread with a mark at center, four nuts, four flat washers and four thick plastic washers. Thread two sets of nut-flat washer-nylon washer into the center portion of the all thread with the plastic washers facing outboard and slip the works fully into the drops, snugging the plastic washers up against the inner face of the dropouts, and reverse the stack order so you've got another set threaded snugged up against the outer face of the dropouts and you're ready to go and it's a lot easier to cart home on your bike than a 2x4. I just eyeball the center mark on the all thread to center between the drops and loosen the outboard nuts a few mm equally and tighten up the inboard sets a half turn or so at a time alternating sides until they're snugged up against the outboard sets and let it rest a bit before I move the outboards a few more mm and repeat the process. You'd be surprised how far you can spread the drops to gain just a mm or two.
If the frame was priceless I would have it professionally tracked and aligned by an experienced frame builder.
If the frame was priceless I would have it professionally tracked and aligned by an experienced frame builder.
#24
Senior Member
Join Date: Sep 2008
Location: Plano, TX
Posts: 790
Bikes: 1968 Falcon San Remo 1973 Raleigh International, 1974 Schwinn Suburban, 1987 Schwinn High Sierra, 1992 Univega Ultraleggera, 2007 Dahon Vitesse DH7G
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#25
Fahrrad Mama
Thread Starter