Determining Schwinn S-something rim size?
#1
Elitest Murray Owner
Thread Starter
Join Date: Apr 2006
Posts: 2,657
Bikes: 1972 Columbia Tourist Expert III, Columbia Roadster
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
Determining Schwinn S-something rim size?
I have an old Schwinn wheel with a two speed bendix mounted in it. I assumed that this was a 26 x 1 3/4" wheel, but now wonder if it may be a 26 x 1 3/8" wheel.
I looked for a size marking on the rim, but only found "SCHWINN UBULAR S-" the stamp is faint and also down the center of rim instead of off to the side like normal, so the T in tubular disappeared into a spoke hole. I cannot make out whether it says S-5 or S-6 either.
Can I measure the width of the rim or its diameter to figure out what size tire fits it?
I looked for a size marking on the rim, but only found "SCHWINN UBULAR S-" the stamp is faint and also down the center of rim instead of off to the side like normal, so the T in tubular disappeared into a spoke hole. I cannot make out whether it says S-5 or S-6 either.
Can I measure the width of the rim or its diameter to figure out what size tire fits it?
#2
Decrepit Member
S-5 is Westrick type rim, while S-6 is Endrick type. For both S-5 and S-6, the rim width lip inside dimension is 20.3mm, while the lip outside dimension is 27.9mm.
S-6 would take 26" x 1 1/4" tires, while S-5 would take 26" x 1 3/8". Both are 597mm. 26" x 1 3/4" tires fit on the middleweight Schwinn S-7 (571mm) rims .
S-6 would take 26" x 1 1/4" tires, while S-5 would take 26" x 1 3/8". Both are 597mm. 26" x 1 3/4" tires fit on the middleweight Schwinn S-7 (571mm) rims .
Last edited by Scooper; 05-28-12 at 06:43 PM.
Likes For Scooper:
#3
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,831 Times
in
1,997 Posts
From a manufacturing point of view those Schwinn "tubular" rims have always impressed me. I have an old New World with the S-6's , effort to find tires for them, but Styling.
#4
Decrepit Member
They could take a helluva beating. The Achilles heel was wet braking with caliper brakes, but many of these rims were used with coaster brake rear hubs or expansion brake front hubs. They weren't exactly light, either.
#5
Elitest Murray Owner
Thread Starter
Join Date: Apr 2006
Posts: 2,657
Bikes: 1972 Columbia Tourist Expert III, Columbia Roadster
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
I'll have to measure it when it gets light out. It actually looks like a combination of the pictured S-5 and S-6, it has a drop center, but with the milling pattern down the center.
Thread
Thread Starter
Forum
Replies
Last Post
mwalsh5757
Classic & Vintage
8
04-21-17 03:06 PM