Campagnolo - 32mm or 36mm ???
Hi... So I'm headed to a store to buy some park tools... Most of my bikes have 80's style campagnolo chorus headsets and campagnolo old school bottom brackets...
Before leaving home I remembered to measure the headset and it was 32mm Here are my questions: - to remove / install a headset will I need two think park 32mm wrenches? - will 32mm also work on a dura ace 7410 headset? - will 36mm work for the tight cup on an 80's campagnolo bottom bracket? - will 36 also work on an 80's style shimano 600 bottom bracket tight cup? Thanks! |
don't know about the shimano cups and hs. but two 32 mm wrenches are needed for a campy headset.Park makes a 36 mm box wrench for the fixed cup with a dual pin combo to aid in adjusting/ removing adjustable cup.They have a 32 and 36 mm open end combo so you have 2 bases covered.If you can score a campy lockring tool on the bay it also has the 32 mm open end,park must have something similar And park has a variety of dual pin wrenches that are spring steel and have a range of sizes by squeezing the handles , green seems to be a winner for most bb's.I'm going to take an educated gues and say there's probably a little standardization of those parts.Just be sure of the direction you want to turn(sheldon brown has the answers in his a-z ) as nothing beats tightening to death something you want to remove
|
1 32mm is minimum required to adjust a headset, a large crescent wrench can tighten the locknut.
32mm headset wrench should be standard for the majority of 1" threaded headsets. 36mm headset wrench is for threaded 1 1/8" headsets. It will also fit a drive side bottom bracket fixed cup. |
All times are GMT -6. The time now is 07:12 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.