85 Schwinn Traveler
#26
Senior Member
Lots of bikes that I've seen here in Sweden have handlebars that are very similar to the Wald ones you used. I suppose the popularity is why Wald has made them for so long, even with such high manufacturing labor costs as you find in the USA.
I suppose the last modification barely took one bottle each of vodka and Jägermeister?
I suppose the last modification barely took one bottle each of vodka and Jägermeister?
#27
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,640
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2597 Post(s)
Liked 1,678 Times
in
926 Posts
Well your only reason is you'll look like a bum or look like you have a DUI and suspended license. And honestly, I usually will check out a bike when I see somebody on one and Ive never seen a bum (or anybody that I can remember) with their bars set up how I had mine. They were flipped upside down and turned around, so it wouldn't be just a one tool fix. And you would need to buy new bar tape since you removed the old to get the bars out. So no, I dont think the bars like that are part of a culture of bikes parked by liquor stores.
Regardless of all that extra work and money required for tape and appropriate levers, who really cares what some people think about you or your bike. The only negative I felt when everybody was staring at me is that they might think Im doing it to try to be cool, rather than just being comfortable and making the best with what I had or was cheap, but like I just said I shouldnt really care about that.
Regardless of all that extra work and money required for tape and appropriate levers, who really cares what some people think about you or your bike. The only negative I felt when everybody was staring at me is that they might think Im doing it to try to be cool, rather than just being comfortable and making the best with what I had or was cheap, but like I just said I shouldnt really care about that.
I see bars set up like that, and I think "hobo." I don't care if they're configured minutely differently. I wouldn't give them a second look. Hobo. Bum. DWI. You, yourself referred to them as "bum bars." I live down the street from a liquor store. I see these bikes laying on the sidewalk in front of the liquor store. I do not see these bikes out and about on recreational rides.
As to who cares... I do. I work hard for my stuff- I deserve to have stuff that I'm proud of because I've earned it. It seems that you're proud of your bike. Cool. It's a cool bike to be proud of, and it's in great shape and it's an immensely practical machine with the baskets you have set up. You were proud enough of it to post pictures on the internet and ask strangers what they thought. That's awesome. I think you have a really cool machine that's worthy to be proud of. I would like it to look nice for you. You've gotten more than 4 people in this thread that have made mention of the DWI-ness of the bike. It would be really nice if no-one made any comments about "bum bars" or "hobo" or "DWI" or "assload of beers" or 'less than a bottle of vodka and Jaegermeister.' I would be most happy if people saw your machine and ONLY thought that it was a cool bike with a variety of purpose.
I wish you the best, and I sincerely hope you enjoy your bike and riding your bike.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#28
Mike J
Join Date: Nov 2013
Location: Jacksonville Florida
Posts: 1,609
Bikes: 1975 Peugeot PX-50L, 1971 Peugeot PX-10, 1974 Peugeot PX-8
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
The bum-bars thing made me laugh, just yesterday a guy from the local labor-pool stopped by for me to true up his S/A hub wheel, and was telling me he wanted some old "racing bars" so he could flip them around the other way, I gave him an old set, and he was stoked. First thing he does when he gets off work is to grab a 4-pack and I see him come by most days, with only 2 left in his handle-bar basket by the time he gets by my place 2 miles from the store...
I had an '86 Traveler in pristine shape I sold in 2 hours on C/L a couple months ago. They're good bikes.
I had an '86 Traveler in pristine shape I sold in 2 hours on C/L a couple months ago. They're good bikes.
#29
Mr. Anachronism
Join Date: Jan 2013
Location: Somewhere west of Tobie's
Posts: 2,093
Bikes: fillet-brazed Chicago Schwinns, and some other stuff
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 526 Post(s)
Liked 256 Times
in
165 Posts
Ok Im thinking I like the bikes where they have a painted line around the lugs of the frame. Are all of these from the factory like that? Or do some people use touchup paint or nail polish? Im thinking of doing either white or yello, or maybe a little of both if I can think of a nice way to do that.
Any suggestions? Just leave it? I would never paint the whole frame, but Im thinking just the little lines around the lugs would look nice.
Any suggestions? Just leave it? I would never paint the whole frame, but Im thinking just the little lines around the lugs would look nice.
__________________
"My only true wisdom is in knowing I have none" -Socrates
"My only true wisdom is in knowing I have none" -Socrates
#30
Mike J
Join Date: Nov 2013
Location: Jacksonville Florida
Posts: 1,609
Bikes: 1975 Peugeot PX-50L, 1971 Peugeot PX-10, 1974 Peugeot PX-8
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
Ok Im thinking I like the bikes where they have a painted line around the lugs of the frame. Are all of these from the factory like that? Or do some people use touchup paint or nail polish? Im thinking of doing either white or yello, or maybe a little of both if I can think of a nice way to do that.
Any suggestions? Just leave it? I would never paint the whole frame, but Im thinking just the little lines around the lugs would look nice.
Any suggestions? Just leave it? I would never paint the whole frame, but Im thinking just the little lines around the lugs would look nice.
#31
Hogosha Sekai
Join Date: Jun 2011
Location: STS
Posts: 6,672
Bikes: Leader 725, Centurion Turbo, Scwhinn Peloton, Schwinn Premis, GT Tequesta, Bridgestone CB-2,72' Centurion Lemans, 72 Raleigh Competition
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Likes: 0
Liked 21 Times
in
15 Posts
Still following your thread, loving the progress. Keep it up.
Check your rim width with tire compatibility and see if it could even work would be step 1 IMO with the current problem.
The charts on this page down at "Width Considerations" https://sheldonbrown.com/tire-sizing.html
Check your rim width with tire compatibility and see if it could even work would be step 1 IMO with the current problem.
The charts on this page down at "Width Considerations" https://sheldonbrown.com/tire-sizing.html
#32
I don't get out enough
Join Date: Jan 2012
Location: las vegas
Posts: 272
Bikes: Gary Fisher Marlin, Bike E rx, Diamondback Centurion Expert TG, early 80's steel bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
It's looking great. I'm glad you changed the bars. Those bars look like they belong. I never associated the flipped drop bars the same as everyone else, but I never thought it looked right. Everything you've done looks good. Nice bike.
#33
Senior Member
Join Date: Jun 2011
Location: Oregon, USA
Posts: 493
Bikes: See my signature.....
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I don't know....I think maybe I would have gone with this sort of handlebar setup, for that really unique/unusual look.....
(I am kidding, of course)
I think your bike in it's current configuration looks really nice......has that classy, utilitarian look....I really like it a lot. I had an '86 Schwinn Traveler a few years back, and they're really nice riding bikes.
While the inverted drop bars didn't look horrible, and I certainly don't think DUI when I see them.....more like 'I either can't afford or don't want to take the time to put the right kind of handlebars on this thing, so there' kind of look. Also, I picked up a super course a couple months back that had the inverted drop bars, and man, did it ever seem twitchy in the handling with the bars like that(it seemed to handle a ton better when the drop bars were put back to normal)......so it might actually handle better with those nice bars you now have on it.
Again, it's your bike, so go with what pleases you.
But I like the Traveler's current look......just looks really sweet, imo.
(I am kidding, of course)
I think your bike in it's current configuration looks really nice......has that classy, utilitarian look....I really like it a lot. I had an '86 Schwinn Traveler a few years back, and they're really nice riding bikes.
While the inverted drop bars didn't look horrible, and I certainly don't think DUI when I see them.....more like 'I either can't afford or don't want to take the time to put the right kind of handlebars on this thing, so there' kind of look. Also, I picked up a super course a couple months back that had the inverted drop bars, and man, did it ever seem twitchy in the handling with the bars like that(it seemed to handle a ton better when the drop bars were put back to normal)......so it might actually handle better with those nice bars you now have on it.
Again, it's your bike, so go with what pleases you.
But I like the Traveler's current look......just looks really sweet, imo.
Last edited by Teon; 02-20-14 at 01:12 PM.
#34
Mr. Anachronism
Join Date: Jan 2013
Location: Somewhere west of Tobie's
Posts: 2,093
Bikes: fillet-brazed Chicago Schwinns, and some other stuff
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 526 Post(s)
Liked 256 Times
in
165 Posts
For $11 it might be worth it to just buy another tire to solve that seating problem. I had a similar issue seating some 27x1-3/8" Club Roost Cross Terra tires on 27x1-1/4" (non-hook) rims, so I ran them at 50psi for awhile and they straightened out.
__________________
"My only true wisdom is in knowing I have none" -Socrates
"My only true wisdom is in knowing I have none" -Socrates
#35
Senior Member
Join Date: Mar 2012
Location: Port Dover Ontario Canada
Posts: 1,540
Bikes: 1965 Dilecta Le Blanc, 1956 Royal Nord, 1972 Raleigh Sports, 1972 CCM Turismo,1976 SuperCycle Excalibur, 2014 Salsa Vaya, 2017 Felt DD70, 2019 Giant Lafree and others
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 349 Post(s)
Liked 575 Times
in
225 Posts
I have a plethora of old Raleighs with 27X1 1/4 tires and find that sometimes the tube is actually under the tire and trying to push it out. Let all the air out and try to work the tube to the center of the rim. It generally solves the problem.
Good luck.
Some of my gum wall 27's.
Good luck.
Some of my gum wall 27's.
__________________
We are what we reflect. We are the changes that we bring to this world. Ride often. -Geo.-
We are what we reflect. We are the changes that we bring to this world. Ride often. -Geo.-