Bike storage
#1
Senior Member
Thread Starter
Bike storage
I happened upon these today while browsing the Home Depot: Closet Max 11-1/4 in. Heavy Duty White Shelf and Rod Bracket-RP-0495-WT at The Home Depot
It turns out that little Us on the end that are for supporting a clothes hanger rod are actually perfect for holding an old bike up, while still allowing a shelf to be put on top! Anyone have any other tips/tricks to save space with their collections?
It turns out that little Us on the end that are for supporting a clothes hanger rod are actually perfect for holding an old bike up, while still allowing a shelf to be put on top! Anyone have any other tips/tricks to save space with their collections?
#2
Senior Member
I have several big coated "U" hooks screwed into a 2 x 4", which is bolted into the studs in the garage ceiling. I hang all 7 bikes by their wheels.
#4
Senior Member
Thread Starter
#7
Senior Member
Join Date: Apr 2014
Location: Philadelphia
Posts: 191
Bikes: 1974 Raleigh Super Tourer, 1974 Ralegh Gran Sport, 1985 Schwinn Peloton, 1986 Schwinn World Sport, 1987 Panasonic DX-4000
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I actually just bought two of these to try this out on a hunch, glad to see it works!
Tomorrow is the day all my bikes and parts go to the newly set-up basement work shop and out of my bedroom (It's been a nightmare)
Tomorrow is the day all my bikes and parts go to the newly set-up basement work shop and out of my bedroom (It's been a nightmare)
#8
Senior Member
Thread Starter
Talk about understanding wife------
This hanger is 22 feet long. Its 1/2 inch conduit, with hooks on it. Used conduit hangers to space the conduit away from the ceiling.
[IMG]IMG_4303 by wrk101, on Flickr[/IMG]
[IMG]IMG_4304 by wrk101, on Flickr[/IMG]
[IMG]url=https://flic.kr/p/pf7RCf][/url]IMG_4469 by wrk101, on Flickr[/IMG]
This is one side of a duplex. I just finished the same room in the duplicate unit. View taken from the same spot in that unit (I built an archway to replace the doorway on that side), both units were in the same condition when I started. Underneath the crappy linoleum floor in the work shop is the same heart pine floor:
[IMG]IMG_4152 by wrk101, on Flickr[/IMG]
This hanger is 22 feet long. Its 1/2 inch conduit, with hooks on it. Used conduit hangers to space the conduit away from the ceiling.
[IMG]IMG_4303 by wrk101, on Flickr[/IMG]
[IMG]IMG_4304 by wrk101, on Flickr[/IMG]
[IMG]url=https://flic.kr/p/pf7RCf][/url]IMG_4469 by wrk101, on Flickr[/IMG]
This is one side of a duplex. I just finished the same room in the duplicate unit. View taken from the same spot in that unit (I built an archway to replace the doorway on that side), both units were in the same condition when I started. Underneath the crappy linoleum floor in the work shop is the same heart pine floor:
[IMG]IMG_4152 by wrk101, on Flickr[/IMG]
#9
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,829 Times
in
1,995 Posts
#10
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,193
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,295 Times
in
865 Posts
This is a heavier-duty version of Thrifty Bill's suspended conduit with sliding hooks.
I used 3/4" Sch40 iron pipe, 17 foot long, which suspends 22 bikes in one of my re-finished basements:
The unfinished basement crawl space sees use as a wheel and frame storage area:
I used 3/4" Sch40 iron pipe, 17 foot long, which suspends 22 bikes in one of my re-finished basements:
The unfinished basement crawl space sees use as a wheel and frame storage area:
#12
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,409 Times
in
909 Posts
My wife an I have an agreement, no bikes sit on the floor (other than hers, which have kickstands). That rule drives my decisions.
I have hanging capabilities for 12, and I'm streamlining back to put my entire collection onto one 7-bike rack that is about 10' long.
It came from WalMart's clearance section, one of those wall hanging systems, and it works well.
For now, I have a 4-bike wall area in a nook that is reserved for cehowardGS's projects. He's my build motivator. When his are done, it will be a lofted mower garage, Christmas stuff on the second level (14' garage ceiling).
Upthewazoo hit upon what many of us have thought about, storage racks NOT made for bikes, and therefore 1/2 to 1/3 the price of those that are.
That rack he bought is nearly identical to a bike-specific one that often runs about $40-$50 at bike shops.
I have hanging capabilities for 12, and I'm streamlining back to put my entire collection onto one 7-bike rack that is about 10' long.
It came from WalMart's clearance section, one of those wall hanging systems, and it works well.
For now, I have a 4-bike wall area in a nook that is reserved for cehowardGS's projects. He's my build motivator. When his are done, it will be a lofted mower garage, Christmas stuff on the second level (14' garage ceiling).
Upthewazoo hit upon what many of us have thought about, storage racks NOT made for bikes, and therefore 1/2 to 1/3 the price of those that are.
That rack he bought is nearly identical to a bike-specific one that often runs about $40-$50 at bike shops.
#13
Senior Member
Join Date: Nov 2013
Location: Big Apple
Posts: 1,428
Bikes: yes
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 512 Post(s)
Likes: 0
Liked 409 Times
in
176 Posts
After considering the various options available, I made five docking stations for free from wood I had lying around.
Each docking station consists of the following pieces:
two 3 1/2" x 3/4" x 8" boards
one 1 3/4" x 3/4" x 8" furring strip
one 3/8" x 4" dowel
eight 1 1/2" wood screws
1/2" holes for the dowel were drilled after the frame was glued and screwed together. Hole measurement location was adjusted to fit different wheel/tire sizes prior to drilling.
The stations hold each bike vertically against the wall, while the bike's weight is actually resting on the rear wheel on the floor.
Each station was screwed to the wall, either into the studs, where they lined-up, or with toggle bolts. Their relative height on the wall slightly varies depending on each bike's wheelbase. Alternating the bikes hanging by front and back wheels would have allowed mounting the stations closer together, but that wasn't an issue with me.
Bikes are locked-in / removed by simply sliding the dowel in and out.
Each docking station consists of the following pieces:
two 3 1/2" x 3/4" x 8" boards
one 1 3/4" x 3/4" x 8" furring strip
one 3/8" x 4" dowel
eight 1 1/2" wood screws
1/2" holes for the dowel were drilled after the frame was glued and screwed together. Hole measurement location was adjusted to fit different wheel/tire sizes prior to drilling.
The stations hold each bike vertically against the wall, while the bike's weight is actually resting on the rear wheel on the floor.
Each station was screwed to the wall, either into the studs, where they lined-up, or with toggle bolts. Their relative height on the wall slightly varies depending on each bike's wheelbase. Alternating the bikes hanging by front and back wheels would have allowed mounting the stations closer together, but that wasn't an issue with me.
Bikes are locked-in / removed by simply sliding the dowel in and out.
#14
Still learning
Talk about understanding wife------
This is one side of a duplex. I just finished the same room in the duplicate unit. View taken from the same spot in that unit (I built an archway to replace the doorway on that side), both units were in the same condition when I started. Underneath the crappy linoleum floor in the work shop is the same heart pine floor:
[IMG]IMG_4152 by wrk101, on Flickr[/IMG]
This is one side of a duplex. I just finished the same room in the duplicate unit. View taken from the same spot in that unit (I built an archway to replace the doorway on that side), both units were in the same condition when I started. Underneath the crappy linoleum floor in the work shop is the same heart pine floor:
[IMG]IMG_4152 by wrk101, on Flickr[/IMG]
#15
Junior Member
dddd,
What are the hooks that hang off the pipe (from which you suspend the bikes)? Did you buy those, or make them yourself? The hooks from which the wheels hang look different from the bike hooks; any reason why?
What are the hooks that hang off the pipe (from which you suspend the bikes)? Did you buy those, or make them yourself? The hooks from which the wheels hang look different from the bike hooks; any reason why?
#16
Senior Member
Join Date: Oct 2013
Location: Playa Larga
Posts: 135
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I happened upon these today while browsing the Home Depot: Closet Max 11-1/4 in. Heavy Duty White Shelf and Rod Bracket-RP-0495-WT at The Home Depot
It turns out that little Us on the end that are for supporting a clothes hanger rod are actually perfect for holding an old bike up, while still allowing a shelf to be put on top! Anyone have any other tips/tricks to save space with their collections?
It turns out that little Us on the end that are for supporting a clothes hanger rod are actually perfect for holding an old bike up, while still allowing a shelf to be put on top! Anyone have any other tips/tricks to save space with their collections?
#18
Senior Member
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times
in
313 Posts
#19
Senior Member
It's a guy thing
Living Room
My Kitchen
My Kitchen
__________________
I'm happy to say that I own more Steel then Carbon. My Stable! ---> https://flic.kr/s/aHsmVZBep7
I'm happy to say that I own more Steel then Carbon. My Stable! ---> https://flic.kr/s/aHsmVZBep7
#20
Ellensburg, WA
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 457 Times
in
160 Posts
I have the luxury of a high ceiling shop for storage. Finally, all the ones that needed hanging up this year - finished today. There are two in my office on the wall that I don't ride - D.D.'s Spinella and my Teledyne Titan. I have one other bike at my dad's so another spot would be needed and stumbled across a deal I'm trying to figure out how to make work so may need an additional spot. We'll see.
I have used the coated hooks also and screw them directly into the wall studs.
It's a little clustered around the door but, thanks to my brother-in-law's contracting stuff and junk corner this is the best place
I found these handy hooks at Home Depot and used them over the large doorway where there wasn't as much space between the door opening and the ceiling. They hold two mountain bikes.
I have used the coated hooks also and screw them directly into the wall studs.
It's a little clustered around the door but, thanks to my brother-in-law's contracting stuff and junk corner this is the best place
I found these handy hooks at Home Depot and used them over the large doorway where there wasn't as much space between the door opening and the ceiling. They hold two mountain bikes.
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
#21
Senior Member
Join Date: Sep 2014
Location: Tualatin, Oregon
Posts: 72
Bikes: 2012 Trek DS 8.4, "Francis" a 1979 Santana Tandem
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Living in an apartment, our space is pretty limited, and we can't install heavy duty hardware in the walls or ceiling.
We found this rack on Amazon, and it works surprisingly well! Amazon.com: Delta Michelangelo Two-Bike Gravity Stand: Sports & Outdoors
Our tandem we store in the spare bedroom.
We found this rack on Amazon, and it works surprisingly well! Amazon.com: Delta Michelangelo Two-Bike Gravity Stand: Sports & Outdoors
Our tandem we store in the spare bedroom.
#22
Banned
Join Date: Aug 2013
Posts: 6,480
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 423 Times
in
282 Posts
Absolutely no bikes permitted in the house. The trade-off is anywhere else. Shoved in the attics, not sure how many are buried in a single car garage (snickering). Nuttin' fancy but screwy... as in j-hooks into the ceiling / joist.
#23
Senior Member
Thread Starter
#24
Senior Member
Join Date: Dec 2007
Posts: 1,373
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 257 Post(s)
Liked 70 Times
in
63 Posts
just stumbled on this one, asked a similar question few weeks back. was in the process of designing a ball bearing type rack as I have limited space in the garage and basement and often need to move a bunch aside to get to tools and other storage items. the system I was designing was getting fairly expensive some of these ideas are great
Bill, dddd, what are you using for the hooks? I can't tell if there were home fabricated
Bill, dddd, what are you using for the hooks? I can't tell if there were home fabricated
#25
Senior Member
The Ontare is tuned and ready to go but I have not had it down in 3 years. It is a rare bike but the jury is still out on how collectable they are. '88 Catalog lists it as the Avion a name Schwinn had to abandon after a copyright dispute. Was sold as the Ontare. The technology licensed through Klien <---spell check. Lol
__________________
I'm happy to say that I own more Steel then Carbon. My Stable! ---> https://flic.kr/s/aHsmVZBep7
I'm happy to say that I own more Steel then Carbon. My Stable! ---> https://flic.kr/s/aHsmVZBep7