Tha annual flat repair thread
#1
Senior Member
Thread Starter
Join Date: Jul 2006
Location: Toronto (again) Ontario, Canada
Posts: 6,937
Bikes: Old Bike: 1975 Raleigh Delta, New Bike: 2004 Norco Bushpilot
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
Tha annual flat repair thread
I got my annual flat this morning. Now that, that's over with.....
Okay, this really should be a poll, but
If you get a flat do you:
1) Call the household SAG wagon.
2) Add some air and home you can limp home.
3) Replace the tube with another, tossing the old one ( I will assume into a proper receptacle).
4) Replace the tube with another, take the old one home to patch.
5) Patch the tube and reinstall
Personally I put myself in category 4, I think 3 out of 3 of my spare tubes have now been patched.....
Okay, this really should be a poll, but
If you get a flat do you:
1) Call the household SAG wagon.
2) Add some air and home you can limp home.
3) Replace the tube with another, tossing the old one ( I will assume into a proper receptacle).
4) Replace the tube with another, take the old one home to patch.
5) Patch the tube and reinstall
Personally I put myself in category 4, I think 3 out of 3 of my spare tubes have now been patched.....
#2
Senior Member
Join Date: Aug 2008
Location: Michigan
Posts: 92
Bikes: Trek 2008 Navigator 2.0, 2010 Trek 7.5FX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Number 3. I would toss the old one, just so that the new spare would be fresh as it sits in my trunk pack for an indefinite period.
I always have a spare tube, levers, and pump in my trunk pack.
I always have a spare tube, levers, and pump in my trunk pack.
#3
"Florida Man"
Join Date: Mar 2008
Location: East Florida
Posts: 1,673
Bikes: '16 Bob Jackson rando, '66 Raleigh Superbe, 80 Nishiki Maxima, 07 Gary Fisher Utopia, 09 Surly LHT
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,697 Times
in
850 Posts
+1 all that, except I carry 2 tubes commuting, 3 for brevets.
__________________
Campione Del Mondo Immaginario
Campione Del Mondo Immaginario
#4
Senior Member
Join Date: Oct 2008
Location: Marysville, WA
Posts: 463
Bikes: Trek Portland/Gary Fisher Hoo Koo E Koo/LeMond Versailles
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I used to call for the wife to come get me, but I keep a spare tube and all the necessary items to replace the tube and inflate it. Then I just throw the old tube away.
It is interesting though. Back when I didn't carry a spare tube I got lots of flats. Now that I am prepared for them I rarely get a flat.
Around here though, there is rarely an instance where you can just re-inflate and limp home. If you get a flat here it was probably from a goathead and the air will come out almost as fast as it goes in.
It is interesting though. Back when I didn't carry a spare tube I got lots of flats. Now that I am prepared for them I rarely get a flat.
Around here though, there is rarely an instance where you can just re-inflate and limp home. If you get a flat here it was probably from a goathead and the air will come out almost as fast as it goes in.
#5
FNG
Join Date: Mar 2009
Location: Quarry Stone
Posts: 877
Bikes: Raleigh Special * Nishiki MTN Winter Commuter * Trek Soho 3 * Specialized Langster Seattle
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#6
Junior Member
Join Date: May 2009
Location: Death Valley, USA
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#3 - I usually stock up at REI, for 10% off when you buy 3 or more, plus the 10% member rebate. At that price, the effort/uncertainty of patching doesn't seem worthwhile for me.
#7
Senior Member
Join Date: Jun 2008
Location: Near Sacramento
Posts: 4,886
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#4. Unless it's an easy hole to find, then I patch it and reinstall.
__________________
-------
Some sort of pithy irrelevant one-liner should go here.
-------
Some sort of pithy irrelevant one-liner should go here.
#8
Senior Member
Thread Starter
Join Date: Jul 2006
Location: Toronto (again) Ontario, Canada
Posts: 6,937
Bikes: Old Bike: 1975 Raleigh Delta, New Bike: 2004 Norco Bushpilot
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
I used to call for the wife to come get me, but I keep a spare tube and all the necessary items to replace the tube and inflate it. Then I just throw the old tube away.
It is interesting though. Back when I didn't carry a spare tube I got lots of flats. Now that I am prepared for them I rarely get a flat.
Around here though, there is rarely an instance where you can just re-inflate and limp home. If you get a flat here it was probably from a goathead and the air will come out almost as fast as it goes in.
It is interesting though. Back when I didn't carry a spare tube I got lots of flats. Now that I am prepared for them I rarely get a flat.
Around here though, there is rarely an instance where you can just re-inflate and limp home. If you get a flat here it was probably from a goathead and the air will come out almost as fast as it goes in.
#10
Senior Member
Join Date: Oct 2008
Location: Marysville, WA
Posts: 463
Bikes: Trek Portland/Gary Fisher Hoo Koo E Koo/LeMond Versailles
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have noticed that it doesn't matter if it is me or the wife that has flatted, she is still the one watching and I am still the one changing.
#11
Senior Member
Join Date: Jul 2006
Location: Columbus, OH
Posts: 11,375
Bikes: '08 Surly Cross-Check, 2011 Redline Conquest Pro, 2012 Spesh FSR Comp EVO, 2015 Trek Domane 6.2 disc
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 7 Times
in
6 Posts
#4
I patch it, and that becomes the new spare. I've got 2 or 3 patches on both my spares; it's never been a problem.
I patch it, and that becomes the new spare. I've got 2 or 3 patches on both my spares; it's never been a problem.
#12
circus bear
Join Date: Sep 2007
Location: Austin
Posts: 642
Bikes: 97(?) GT Richochet, 00 Schwinn SuperSport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#14
Senior Member
Thread Starter
Join Date: Jul 2006
Location: Toronto (again) Ontario, Canada
Posts: 6,937
Bikes: Old Bike: 1975 Raleigh Delta, New Bike: 2004 Norco Bushpilot
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
You need an old fashioned glue in a tube patch, in order for patches to work well. You also need to do it properly, find the hole, scuff up the surface, apply the glue, let the glue get tacky, apply patch. I then apply a weight overnight, use the water test the next day to see if it's holding properly. Let all the air out and roll it up, it gets added to the pile-o-spares. Currently I keep one spare on my wifes bike, one on my bike, and one in the garage. If we are going further, I'll toss the spare in the garage into a pannier.
Yeah I know a tube is only $3 or so, but I can get a box of patches and two glue tubes for $3, which means I can fix 10 punctures for the same amount, a savings of $27.
Yeah I know a tube is only $3 or so, but I can get a box of patches and two glue tubes for $3, which means I can fix 10 punctures for the same amount, a savings of $27.
#15
Senior Member
Join Date: Oct 2008
Location: Marysville, WA
Posts: 463
Bikes: Trek Portland/Gary Fisher Hoo Koo E Koo/LeMond Versailles
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I jinxed myself by saying I haven't been getting flats. Got one today. Some kind of metal shard that made it through the Gatorskin. It was a beeyotch to pull the shard out. It was really stuck in there.
#16
Grammar Cop
Join Date: Jan 2008
Location: Papa Smurf's Lair
Posts: 1,543
Bikes: in my sig line
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
6. Walk to nearest bus stop and thence to either
a. car
or
b. bike shop.
Option A is followed by a visit to Option B.
a. car
or
b. bike shop.
Option A is followed by a visit to Option B.
#17
Genetics have failed me
Depends... if I'm in a hurry, than #4, otherwise #5. Had to do #5 twice this year already. And did twice the #4 as well, one of them in the rain
__________________
Gelato aficionado.
Gelato aficionado.
#18
Junior Member
Join Date: Jul 2008
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I change to a new tube, and carry the old one home with me. I always carry a patch kit as well. That way, if I have another flat, I've got options.
#19
Senior Member
Join Date: Mar 2003
Location: Beaufort, South Carolina, USA and surrounding islands.
Posts: 8,521
Bikes: Cannondale R500, Motobecane Messenger
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
#3, but I still carry a patch kit for those 3rd and 4th flats on a ride.
#20
Mike the Bike
Join Date: Apr 2009
Location: Southern CA
Posts: 190
Bikes: Giant OCR C3/Gary Fisher Tasjahara
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
4 on first flat, 5 after
I rarely flat but seems that when I do, it happens multiple times. And no, i usually don't forget to find whatever flatted me the first time. I keep a couple of cotton balls in my kit to check for whatever caused the puncture. One ride last winter I flatted twice and my wife flatted once, my flats were on different tires. Totally bad day, even ran out of CO2.
I rarely flat but seems that when I do, it happens multiple times. And no, i usually don't forget to find whatever flatted me the first time. I keep a couple of cotton balls in my kit to check for whatever caused the puncture. One ride last winter I flatted twice and my wife flatted once, my flats were on different tires. Totally bad day, even ran out of CO2.
#21
Senior Member
Thread Starter
Join Date: Jul 2006
Location: Toronto (again) Ontario, Canada
Posts: 6,937
Bikes: Old Bike: 1975 Raleigh Delta, New Bike: 2004 Norco Bushpilot
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
4 on first flat, 5 after
I rarely flat but seems that when I do, it happens multiple times. And no, i usually don't forget to find whatever flatted me the first time. I keep a couple of cotton balls in my kit to check for whatever caused the puncture. One ride last winter I flatted twice and my wife flatted once, my flats were on different tires. Totally bad day, even ran out of CO2.
I rarely flat but seems that when I do, it happens multiple times. And no, i usually don't forget to find whatever flatted me the first time. I keep a couple of cotton balls in my kit to check for whatever caused the puncture. One ride last winter I flatted twice and my wife flatted once, my flats were on different tires. Totally bad day, even ran out of CO2.
#22
Junior Member
Join Date: Jun 2009
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've only gotten two flats in the my 10 years of riding.
1. The first one occurred while riding on vacation in Maine. I changed the tube (took me 45 minutes because it was my first real-world experience) -- then discovered that I was less than 1/4 mile from a bike shop (it was around the corner at the end of the street I was on).
2. The second one was a blow-out and occurred on entering the parking lot where my car was parked (maybe 30 ft from the car). I simply put the bike on the rack and drove to my LBS, which was on the way home.
I'm now riding with a new lady friend who is learning to ride. She is a glass magnet. We've done seven 20+ mile rides together, and she's gotten a flat on each one of them. Depending on how bad the hole is, I either change the tube or patch it so that we can finish the ride. She took a class at the LBS recently and dealt with the last two herself.
I don't keep patched tubes -- I've seen too many people on club rides have patches blow out on them (or at least start leaking). If I patch a tube, I replace it as soon as I can.
The problem with riding with your significant other is that -- if there is a flat -- there's no SAG wagon to call home to.
1. The first one occurred while riding on vacation in Maine. I changed the tube (took me 45 minutes because it was my first real-world experience) -- then discovered that I was less than 1/4 mile from a bike shop (it was around the corner at the end of the street I was on).
2. The second one was a blow-out and occurred on entering the parking lot where my car was parked (maybe 30 ft from the car). I simply put the bike on the rack and drove to my LBS, which was on the way home.
I'm now riding with a new lady friend who is learning to ride. She is a glass magnet. We've done seven 20+ mile rides together, and she's gotten a flat on each one of them. Depending on how bad the hole is, I either change the tube or patch it so that we can finish the ride. She took a class at the LBS recently and dealt with the last two herself.
I don't keep patched tubes -- I've seen too many people on club rides have patches blow out on them (or at least start leaking). If I patch a tube, I replace it as soon as I can.
The problem with riding with your significant other is that -- if there is a flat -- there's no SAG wagon to call home to.
#23
Senior Member
Join Date: Aug 2007
Location: nw ohio
Posts: 563
Bikes: 08 Novara Safari; 06 Schwinn Super Sport DBX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
2 then 4 or 5 depending on time and type of flat
slow leak Monday morning but made it home and patched it.
slow leak Monday morning but made it home and patched it.
#24
Full Member
5. I have to find the leak, so I can make sure there is nothing in the tire to cause a 2nd leak. If I replace the tube, then I seriously need to consider if I want to continue or take the shortest route home.
#25
Senior Member
Join Date: Jul 2008
Location: Beltsville, Maryland
Posts: 81
Bikes: Jamis Commuter 3 and Novara Randonee
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My first ride of the year had a flat. What a great way to kick things off. The sequence of attempted fixes was:
#4 Replace tube with carried spare. No wait, that's a used tube that had a slow leak that I forgot to patch when I got home last time.
#5 Patch tube using patch kit. Dang! The rubber cement in the patch kit is all dried up from last year, guess I have to replace it. Any self adhesive patches? Of course not.
#2 Put slow leak tube on wheel, pump up the tire and head home by the shortest route (2 miles). Success!
Did I mention I also found I had a broken spoke while "repairing" the flat? What a way to start the biking season.
#4 Replace tube with carried spare. No wait, that's a used tube that had a slow leak that I forgot to patch when I got home last time.
#5 Patch tube using patch kit. Dang! The rubber cement in the patch kit is all dried up from last year, guess I have to replace it. Any self adhesive patches? Of course not.
#2 Put slow leak tube on wheel, pump up the tire and head home by the shortest route (2 miles). Success!
Did I mention I also found I had a broken spoke while "repairing" the flat? What a way to start the biking season.