Help turning five bikes into three.
I thought this should be posted here, but if the mods want to move it, that's cool. I'm dealing with things across many forums here: Clydes (me), Classic & Vintage (the Kodiak's), Mountain Bikes (Hard Rock), Hybrids... you get the picture.
Here is my plan:
1) I currently have a Trek 730 Multitrack (stock, 19in) that my son is outgrowing as we speak and a slightly larger (21 or w23in) Raleigh Kodiak that he is coveting and almost fits on.
2) I have an older mid-nineties Specialized Hard Rock nearly complete, a larger 25in Raleigh Kodiak, and my Trek T300s that I currently ride.
Take the wheels off the 730 and put them on the smaller Kodiak, then move the brakes, shifters, levers, stem and butterfly bars off the 730 on the HR, and move the wheels, headlight and fenders from the T300s to the 25in Kodiak. After everything is moved, I should have two fork/ frame sets and two sets of 27in wheels, to sell, freeing up some valuable real estate in my garage, and making room for a tandem maybe next year. Ultimately, my son and I will have "real" touring bikes and I will have have a beater/ commuter/ grocery getter, and my lovely wife will have fewer bikes to look at in the garage.
Rebuilding the Hard Rock will be easy, as it is nearly a swap out of parts. The problem I am having is with the tire size and the gearing. The 730 wheel is a seven speed going onto a bike that is currently a six speed, and the T300s is an eight speed going to a six as well.
Both donor bikes are running 700 x 38 tires, and they just fit, leaving no room for fenders.
I guess what I really want is garner some help from the experts hear on BF so I can make this happen using me as the wrench. Any additional information needed, I'll happily provide.
Please and thank you.
46 views and no thoughts or ideas? Come on folks help me out please. :)
The right forum for this is the mechanics forum. thats where the answers will be.
It seems like when you go from 6 speeds to 7 or 8 you need a wider spacing in the rear, right? Like you 7 and 8 speed wheels fit on the same frame, but to fit them on a frame that had a 6 speed wheel previously you might need to spread it. Is cold set the right term? Or am I talking crazy?
1. the 6, 7, 8-spd wheels, are they freewheel or freehubs?
2. the remaining 3-bikes, do they have 126mm, 130mm or 135mm OLD on the rear-triangle?
3. brakes? calipers or cantilever or V-brakes? May make going from 27" to 700c a difficulty if adjustment ranges aren't large enough.
Let's fill out the following for each bike:
BIKE#1 - modelThen the same for rest of the 5 bikes.
|All times are GMT -6. The time now is 06:48 AM.|