So I want a new touring bike
#1
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Cut n Shoot Texas
Posts: 92
Bikes: 86' schwinn sprint updated and converted to touring, Trek 3 series, trek 1.2, and as soon as the disk LHT comes out it will be added
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
So I want a new touring bike
In shopping around and looking at all the options I want as well as color choice I can't seem to find anything under 2 or 3 grand. Or a sickly overpriced bike with a name I can't really bring myself to give a crap about.
I always had the idea of building my own and have signed up for a class to build my own 700c touring frame to my specs. Swap out all my gear from my trek mtb and we gonna go for a ride. Now it's jus sittin back an not gettin too antsy before the class.
I always had the idea of building my own and have signed up for a class to build my own 700c touring frame to my specs. Swap out all my gear from my trek mtb and we gonna go for a ride. Now it's jus sittin back an not gettin too antsy before the class.
#2
Senior Member
Should have bought Nashbar's $100 aluminum frame when it was on sale for $80 a couple of weeks ago. Throw on whatever components you've got stashed in the parts bin and you're good to go!
#3
Senior Member
Join Date: Mar 2004
Location: La Verne CA
Posts: 5,049
Bikes: Litespeed Liege, Motorola Team Issue Eddy Mercxk, Santana Noventa Tandem, Fisher Supercaliber Mtn. Bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Likes: 0
Liked 11 Times
in
7 Posts
take a look at surly.. You can even do touring on there crosscheck - it is a little sportier than other touring bikes. or use there long haul trucker which is there touring bike
https://surlybikes.com/bikes/cross_check
https://surlybikes.com/bikes/long_haul_trucker
https://surlybikes.com/bikes/cross_check
https://surlybikes.com/bikes/long_haul_trucker
#4
Senior Member
I had a Surly LHT for a while and really liked it. I paid $1000 for it, a year later when I had some "extra money" I upgraded the frame to a Rivendell Hunqapillar and like it a lot more. The frame for the Hunq was $1500 then, I sold the LHT frame for $350 so the net cost was $2200 but I have absolutely no regrets. If you have the parts you want (or can live with) a Surly Cross-Check or LHT frame would be the route to go. If you want to spend a little more, look at a Riv Hillborne or Hunqapillar, you won't believe the quality of the ride.
Marc
Marc
#6
Senior Member
Of course, the real solution to this problem is to do both Buy a cheap Nashbar frame and start riding it today, then build a custom frame at some point in the future. This works particularly well if you've never spent time on a touring bike. Riding one, even on a few short tours, will give you a much better idea of what you want or need in a custom frame. If I'd done that before building my own custom bike, I'd have done a few things differently.
#7
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Cut n Shoot Texas
Posts: 92
Bikes: 86' schwinn sprint updated and converted to touring, Trek 3 series, trek 1.2, and as soon as the disk LHT comes out it will be added
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have bikes to ride but I am wanting a lugged touring frame and as for the LHT it is a damn good bike and I consider it the best bang for the money on the market. I spent a day on one and found it a bit boring like a Harley with a moped engine it was good. It it lacked that certain something. I have looked around for a lugged touring frame with a modern headset as I never really liked the old style. But they aren't cheap and most of the time your paying for the frame builders name something I don't really care about.
I fell in love with lugged frames as a teenager and the new bIke's to me just don't really add up to me. I rode a frame like I am building about 3 months ago and figured out what I was missing. It really has a different ride, and I can't put my finger on exactly what it is.
I fell in love with lugged frames as a teenager and the new bIke's to me just don't really add up to me. I rode a frame like I am building about 3 months ago and figured out what I was missing. It really has a different ride, and I can't put my finger on exactly what it is.
#8
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
Could be that the long chainstays and heavier tubing led to a duller ride. If I could build my own lugged touring/rando frame, I'd start with the LHT's angles and low bottom bracket, use thinner tubing, shorten the chainstays a little, add some fork rake to reduce the trail, and finally use horizontal dropouts for versatility.
#9
Senior Member
Join Date: Jun 2008
Location: Maryland
Posts: 570
Bikes: Hollands Touring Bike, Schwinn mountain bike, folding bike, tandem and triple
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Some years ago, when I had a family with young kids, I couldn’t afford what I wanted to ride, so I built a couple of frames. One was a frame with 26” wheels for commuting on rough roads. I have since modified that bike and turned it into an Expedition Touring bike; a go anywhere bike that carries a full touring load. I have also finally found 26” tires that I feel are suitable for road use, with or without a load, that don’t seem more suited for use on the family tractor.
In addition to my 26” wheeled homebuilt, I have a couple of 700c touring bikes. The most recent was built on a Salsa Vaya frame. It works well and I find I may like disk brakes even more than cantis. Mostly I ride on the roads, but they are all capable of carrying the load.
So it is possible to buy a complete bike, buy a frame and build it up, or sweat and slave away over a homebuilt frame with a torch. Each can produce a fine bike. I would recommend you get a little more experience with a touring bike to determine what features and geometry you like before you take the plunge and build your own.
In addition to my 26” wheeled homebuilt, I have a couple of 700c touring bikes. The most recent was built on a Salsa Vaya frame. It works well and I find I may like disk brakes even more than cantis. Mostly I ride on the roads, but they are all capable of carrying the load.
So it is possible to buy a complete bike, buy a frame and build it up, or sweat and slave away over a homebuilt frame with a torch. Each can produce a fine bike. I would recommend you get a little more experience with a touring bike to determine what features and geometry you like before you take the plunge and build your own.
#10
Senior Member
Join Date: Oct 2011
Location: Normal, Illinois
Posts: 2,714
Bikes: Trek 600 ,1980Raleigh Competition G.S., 1986 Schwinn Passage, Facet Biotour 2000, Falcon San Remo 531,Schwinn Sierra, Sun Seeker tricycle recumbent,1985 Bianchi Squadra
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Liked 12 Times
in
9 Posts
Longhaultrucker , I think you should build a frame . I think you know enough about your likes and dislikes , from reading your posts it sounds like you have a good grasp of what you expect from a bike . Knowing how to build a bike frame will let you build as many as you need , and give you the gateway to developing a valuable skill .And you'll have a truly unique bike .
#11
Watching and waiting.
Join Date: Oct 2010
Location: Mattoon,Ill
Posts: 2,023
Bikes: Trek 7300 Trek Madone 4.5 Surly Cross Check
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
longhaultrucker: I know exactly what you're saying about Surly's LHT. I still wanted something like it but a little more snappy. I went ahead and bought a Cross Check frameset and built it up with a Sram Rival Groupset. I'm running a 46/36 crank with a 12-27 cassette. One thing I'd change if I ever do loaded touring in hills would be to get Sram's WiFli RD https://www.sram.com/sram/road/produc...th/term-id/381 with a 11-32 cassette.
I get a lot of comments such as "old school" and "steel is coming back" from other riders.
I get a lot of comments such as "old school" and "steel is coming back" from other riders.
#12
aka: Mike J.
Have fun in the frame building class, take pics, and keep us posted. There is also a framebuilders section somewhere here which you've probably already found. And Frank the Welder (or something like that) builds frames (downhill bikes?) and hangs out in the C&V section. Basically what I'm saying is to have fun and that you're in good company.
Once you've got the basics down, from what I've heard, as soon as you build one then you'll be planning the next one and will be calculating monor geometry changes to fine tune the ride and fit.
Once you've got the basics down, from what I've heard, as soon as you build one then you'll be planning the next one and will be calculating monor geometry changes to fine tune the ride and fit.
#13
Senior Member
More likely you'll be trying to scrape together the money you'll need for tools: O-A torch or TIG welder, frame jig, tube mitering setup, an alignment table, precision measuring tools, frame prep tools, etc. Frame building isn't cheap, if you want to do it properly!
#14
Senior Member
Thread Starter
Join Date: Dec 2010
Location: Cut n Shoot Texas
Posts: 92
Bikes: 86' schwinn sprint updated and converted to touring, Trek 3 series, trek 1.2, and as soon as the disk LHT comes out it will be added
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
One of the motivating factors is I have most of the tools without a jig but I will document and photo as many steps as I can.....
#15
Senior Member
Join Date: Oct 2011
Location: Normal, Illinois
Posts: 2,714
Bikes: Trek 600 ,1980Raleigh Competition G.S., 1986 Schwinn Passage, Facet Biotour 2000, Falcon San Remo 531,Schwinn Sierra, Sun Seeker tricycle recumbent,1985 Bianchi Squadra
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Liked 12 Times
in
9 Posts
The jig sounds like where this
framebuilding thing gets complex ,
depending on the tolerances involved .
framebuilding thing gets complex ,
depending on the tolerances involved .
#16
aka: Mike J.
Building a jig might be part of the class, at least it should be. Ask down in the framebuilders section, there might be a local to you builder who will let you see his jig setup.
__________________
= = = = = = = = = = = = = = = = = = = = = =
Life happens, don't be a spectator.
= = = = = = = = = = = = = = = = = = = = = =
Life happens, don't be a spectator.
#17
Senior Member
Jig building is a class unto itself! At least it is if you want to build something that's going to be reusable and offer the precision necessary to build a decent frame. There's a reason that places like Anvil and Henry James charge $4000 for a professional-quality jig... Which isn't to say that you can't build a jig for less, just that you'll have to make compromises. There are some nice designs which use 8020 extrusions, for instance. The only downside is that setup, and especially jig alignment, can be time-consuming and a bit error-prone.
#18
Senior Member
Join Date: Oct 2011
Location: Normal, Illinois
Posts: 2,714
Bikes: Trek 600 ,1980Raleigh Competition G.S., 1986 Schwinn Passage, Facet Biotour 2000, Falcon San Remo 531,Schwinn Sierra, Sun Seeker tricycle recumbent,1985 Bianchi Squadra
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Liked 12 Times
in
9 Posts
Ridgidity might be an issue as well .
I might add that some of the
European frames were built by eye .
I might add that some of the
European frames were built by eye .
Thread
Thread Starter
Forum
Replies
Last Post
FromTheForest
Touring
12
03-19-13 09:58 PM
BigCurly
Long Distance Competition/Ultracycling, Randonneuring and Endurance Cycling
38
12-20-12 06:43 PM