Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Clydesdales/Athenas (200+ lb / 91+ kg) (https://www.bikeforums.net/clydesdales-athenas-200-lb-91-kg/)
-   -   Trek Ion CX Pro for heavy clyde, need advice. (https://www.bikeforums.net/clydesdales-athenas-200-lb-91-kg/931679-trek-ion-cx-pro-heavy-clyde-need-advice.html)

dkyser 01-27-14 04:30 PM

Trek Ion CX Pro for heavy clyde, need advice.
 
1 Attachment(s)
I purchased this bike last year and love it to death, so much easier to ride over my Trek Navigator, can easily ride more miles.
Problem came up when I was just unsure of the wheels, ended up putting less than 15 miles on the flat highway.

No issues, just realized that the front wheel was only 18 hole and rear 24 hole, I got nervous and thought I might have to buy some custom wheels before doing much riding.
I know the frame is rated at 300# but with it being a cyclocross, should be stout enough for me to ride it gently on the main roads until I get down to the 300# mark.

I am currently at 350, and hopefully by spring at 330 or less.
Here is my ride, do you feel its a safe ride or would you upgrade the tires and wheels. Does everything else seem to be safe? I was not trying to get something to race, but figured if it could be raced hard, should be heavy duty enough for easy going for a big guy.

2013 Trek Ion CX Pro
54 cm Alpha 200 Frame
Fork Trek Carbon Cross E2
Bontrager Race Wheels 18 Hole Front, 24 Hole Back
Bontrager CXO Team Issue 700X34 Tires
Inflate 60psi – 80 psi

Wheel Info
http://bikeforums.net/attachment.php...hmentid=361684

Thanks

ahultin 01-27-14 05:30 PM

I wouldnt worry about it yet. For the riding you say you are doing, the wheels are not likely to fold on you but are more likely to start to become untrue and eventually start breaking spokes. My 20/24 spoke wheels lasted me about 2000 miles before starting to snap spokes. I purchased my road bike at about 330lbs
Just start saving your pennies for when they start to go you can have a clyde worthy set built

dkyser 01-27-14 07:22 PM


Originally Posted by ahultin (Post 16445417)
I wouldnt worry about it yet. For the riding you say you are doing, the wheels are not likely to fold on you but are more likely to start to become untrue and eventually start breaking spokes. My 20/24 spoke wheels lasted me about 2000 miles before starting to snap spokes. I purchased my road bike at about 330lbs
Just start saving your pennies for when they start to go you can have a clyde worthy set built

Thanks, I by no means plan on pushing it. I figure before I am up to any hills, I will be below the 300 lb mark

thrllskr 01-28-14 08:52 AM

I was riding some 20/24 Oval Concepts 535 series with DT Bladed spokes, Continental 4000 700x25, and here were my results. I weigh in about 225 and only do street riding. Less than 500 miles and I had broken a rear spoke. Within a week of the first spoke breaking, 3 more broken spokes 14 miles from home, I was stranded. The wheel has been rebuilt with DT 2.0 round spokes. I rode it for another 150 miles and it was out of true, wobbles, not just a bump. I took the front and read wheels off and they were both out of round; so far out of round I could see it and feel it. Once you break one spoke the remaining spokes will do the same. My advice is to start looking for some 36h rims sooner rather than later. You might have different results with your wheels but, it is no fun having to get a ride or hop on the bus.

Wanderer 01-28-14 09:28 AM

If it were me, I'd have a new set of 36 to 40 spoke wheels built up, just for that bike. Sell the original wheels while they are still in good shape, to help finance the new ones. A 40 spoke rear and a 36 front, will carry just about anything without an issue. Assuming they are well built.

I would also opt for bigger tires, if they will fit. Something like 37 to 40s, for the added comfort and carrying capacity. Something in a slick like tire, for less rolling resistance. Those knobs aren't doing you any favors, on the street.

ill.clyde 01-28-14 10:23 AM


Originally Posted by Wanderer (Post 16446988)
If it were me, I'd have a new set of 36 to 40 spoke wheels built up, just for that bike. Sell the original wheels while they are still in good shape, to help finance the new ones. A 40 spoke rear and a 36 front, will carry just about anything without an issue. Assuming they are well built.

I would also opt for bigger tires, if they will fit. Something like 37 to 40s, for the added comfort and carrying capacity. Something in a slick like tire, for less rolling resistance. Those knobs aren't doing you any favors, on the street.

No offense, but if he wanted something with wide tires he already had it with his Navigator that he was thrilled to be rid of.

As for the OP.
1. You're fine. Stop thinking and just ride. Your bike is safe.
2. Sure, you may pop a spoke, it's called wear and tear. It happens. There's no need to freak out and spend money on another set of wheels. Not to mention, if you bought the bike at a shop, chances are you got a year, sometimes two, of free service/maintenance. Have your wheels checked often by your shop for routine maintenance.

Wanderer 01-28-14 10:45 AM

There is already a huge difference between a 26" Navigator, and any cross bike...... skinny tires won't make it any more pleasant, nor make it go faster. Quality, wider, tires, will do both.

Erwin8r 01-30-14 12:18 AM

At 350, I'd say it's safer to go with a 32 or 36 h wheelset. I'm not an alarmist by any stretch (I'm a 235 - 245 lb clyde riding/commuting on carbon road bike with 18/24 wheels), but at anything more, I'd have more peace of mind with a stronger wheelset--a nice 32 h would do it for me. As a matter of fact, my "winter" wheelset is a 32h custom (campy veloce hubs with velocity aerohead rims, brass nipples, db spokes). Ymmv.

dkyser 01-30-14 04:52 AM

Thanks for the replies.
Since its -10 here, have plenty of time before I get to ride, Lots of time to loose more weight.
I am getting a Park wheel truing stand, and if I decide to use these tires and wheels may check them before and after a 5 mile ride and see how they are holding up. If good, will extend the ride and keep checking. If going out of true quickly will swap them out until I am down more.
I do have the navigator to ride in a pinch but no where near as fun to ride.


All times are GMT -6. The time now is 07:32 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.