Advertise on Bikeforums.net



User Tag List

Results 1 to 6 of 6

Thread: New wheels...

  1. #1
    Senior Member
    Join Date
    Mar 2005
    Location
    NY state
    My Bikes
    See Signature...
    Posts
    1,232
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    New wheels...

    Well last weekend I rebuilt the hub bearings on my year old Podium 2 stock wheels. Standard procedure for me, factory adjustments are too tight and the grease is sticky, I feel Park grease works far better (I have a tub).

    While doing that, I noticed the front hub runs out about the axle! About 1-2mm. No wonder the wheel runs out!

    So, I just found 2 x 32h Velocity Deep V rims on Ebay, brand new, $89 after shipping. Seems cheapest I see around for machined sidewall Deep V is $60 or so each. Going to look into hubs, Was thinking 105, but Tiagra seem to be near as good for a bit less. I'll look around on prices. Spokes will be wheelsmith DB with plated brass nipples. 3x laced all the way around for strength! Weight is not super important, I'm used to nice heavy MTB wheels/tires...

    Honestly, the factory 28h wheels with radial front, and 2x rear felt weak to me. And even with fresh grease and a proper adjustment, they don't seem to spin near as well as my 13 year old LX hubs. Being 228lbs and dropping, and reading all that Mr. Beanz has written about his astounding luck with Deep V, I thought I'd build my own! I've built one wheel and re-built another, so its not gonna be hard

    Won't happen anytime soon, gonna build them... sometime Might not be till spring, might be before then. Depends when I find good deals on hubs, then once I have both in hand and can take measurements, and use spocalc, I can get spokes...

    So, where do you all find the cheapest Wheelsmith DB stainless spokes? I'll need 64 total, likely 2 or 3 different sizes.
    2012 Diamondback Podium 2 - Ready for spring! :D
    1995 Specialized Rockhopper Rigid - SS converted!

  2. #2
    Junior Member
    Join Date
    Jan 2014
    Location
    Bakersfield, CA
    My Bikes
    2012 Specialized Allez comp, 2011 Specialized Hardrock
    Posts
    20
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    The Tiagra would be a fine choice for the hub IMO. I had a local wheel builder put together a wheel for me about 18 months ago for my Specialized Allez. I had been breaking spokes and need the stronger wheel to support my weight, I've fluctuated between 280 and 320lbs in those 18 months. He used a Velocity Deep V, without counting I can't be sure but I believe it's a 36h, and he went with the Tiagra hub. I'm not sure of the brand of spokes, but I know that he only uses one brand on all of his builds.

  3. #3
    Senior Member
    Join Date
    Mar 2005
    Location
    NY state
    My Bikes
    See Signature...
    Posts
    1,232
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by therunt View Post
    The Tiagra would be a fine choice for the hub IMO. I had a local wheel builder put together a wheel for me about 18 months ago for my Specialized Allez. I had been breaking spokes and need the stronger wheel to support my weight, I've fluctuated between 280 and 320lbs in those 18 months. He used a Velocity Deep V, without counting I can't be sure but I believe it's a 36h, and he went with the Tiagra hub. I'm not sure of the brand of spokes, but I know that he only uses one brand on all of his builds.
    How do the Tiagra's spin for you? from all I can tell they are just a less fancy, inexpensive version of 105. I'm not concerned with weight, I have more than enough to lose myself!

    As far as spokes, I tend to stick to Wheelsmith. They work for me. DT swiss or Sapim are also good choices, but I've used Wheelsmith on two wheels, no issues. I would venture a guess your wheel either has wheelsmith or DT swiss. Those seem like the top 2 choices.
    2012 Diamondback Podium 2 - Ready for spring! :D
    1995 Specialized Rockhopper Rigid - SS converted!

  4. #4
    Senior Member
    Join Date
    Jun 2010
    Location
    St. Pete, Fl
    My Bikes
    Trek 700 (2000ish), 88 Schwinn Voyaguer, late 80's-ish lugged Spalding mountain bike
    Posts
    116
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I have a tiagra/deepV 36h rear wheel, that has been great for over two years now. Spins great, never broke a spoke, has only ever needed standard bearing maintenance. I tend to hover around 310-320 lbs.

  5. #5
    Junior Member
    Join Date
    Jan 2014
    Location
    Bakersfield, CA
    My Bikes
    2012 Specialized Allez comp, 2011 Specialized Hardrock
    Posts
    20
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by nymtber View Post
    How do the Tiagra's spin for you? from all I can tell they are just a less fancy, inexpensive version of 105. I'm not concerned with weight, I have more than enough to lose myself!

    As far as spokes, I tend to stick to Wheelsmith. They work for me. DT swiss or Sapim are also good choices, but I've used Wheelsmith on two wheels, no issues. I would venture a guess your wheel either has wheelsmith or DT swiss. Those seem like the top 2 choices.
    it spins great!

  6. #6
    Senior Member
    Join Date
    Mar 2005
    Location
    NY state
    My Bikes
    See Signature...
    Posts
    1,232
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Sweet, sounds like Tiagra it is! That will save me a bit, not that 105 are expensive, but Tiagra are about $30-40 cheaper for the set. Thats a lot when your saving for a house... Which is why I want wheels now, because once I have a house I will not spend the extra money! Actually, $40 is a new pair of Aero Tech bike shorts, which I also happen to need
    2012 Diamondback Podium 2 - Ready for spring! :D
    1995 Specialized Rockhopper Rigid - SS converted!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •