New Bike: 2007 Brodie Romax
#1
Senior Member
Thread Starter
Join Date: Jul 2007
Posts: 194
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
New Bike: 2007 Brodie Romax
Rules for ordering a Brodie:
1) Find a dealership.
2) Be patient.
3) Realize that their sizing chart is about 1 size off (order a size smaller, IMO)
4) Be patient.
5) Love your LBS for being patient with you and helping you get an awesome bike.
So this has been a long time coming, but I figured I’d post a few pics and the build sheet as this is to be my main commuter. The commute is 6.5 miles, 99% on road, 5 days a week. I wanted to build something that could be robust all season, take panniers and fenders, and be pretty fast for the occasional group ride/sprint tri/overnight tour. And if the local cyclocross circuit would let an amateur run a commuter with disc brakes, then that too. Pretty wide range of tasks, but I think it’s a nice compromise all together.
The 2007 Romax frame got the call because of the sloping top tube, disc tabs, rack mounts, cyclocross geometry, all at the right price. The Spinergy wheels were an ebay find prior to settling on a frame, and I haven’t seen anything like them anywhere (700c 32h disc wheels below 1700g). Avid BB7’s, FSA crankset, Xpedo pedals, allen skewers and the Selle Italia were the logical choices. For my commute that is mostly all pavement, I could have gone with a true touring/road tire, but I wanted to keep it a little ‘cross, hence the Vittorias. I’ll probably end up on some Schwalbe touring tire in a few months, but these are fun for now. Great in grass/hard pack dirt. The SRAM Rival group was probably a deviation from common logic (and my LBS’s love for Shimano), but the solid feel of the brake levers, aero cabling look, weight, and wanting to be different made that selection. The Salsa bars are HUGE, but I’m loving the many hand positions they offer. The LBS owner commented that they’re nearly MTB bar width if you grab them like they’re bar ends, offering some really useful leverage.
He is a smidge over 21# in current form, and the racks and fenders are going on in a few days. The LBS has dubbed him “Cry Baby”, because that’s what they called me when I whined about my bike not being here for 3 months. I think it suits the blue well. I ordered a 56cm, which should be way too small by their sizing chart as I’m 6’1”, with a 33” inseam, but the standover is perfect. I went with a 130mm stem to get me a little over the bars, but that might be overkill, so we’ll see if I need to go back to the 100mm after riding it a bit fully loaded.
Build sheet:
SRAM Rival Shifters
SRAM Rival rear derailleur
SRAM Force front derailleur
SRAM PC1070 10sp chain
SRAM OG1070 cassette
Avid BB7 Road Front Brake
Avid BB7 Road Rear Brake
Thomson Elite Stem
Ritchey comp seatpost
Selle Italia Gel Flow Black
seatpost clamp
FSA Gossamer Compact
xpedo SS pedals
Vittoria EVO Cross XN
tubes
Skewers (allen)
Headset
bar tape
Spinergy Xyclone wheelset
Salsa Moto Ace Bell Lap Handlebar
2007 Brodie Romax Frame & Fork
I’ll post some pics of it loaded up with the fenders and panniers later this week, but for now, here’s what I got:
For more pics (including ones of me being a dumbass and crashing it), click here.
Comments, suggestions, and general heckling is always welcome
1) Find a dealership.
2) Be patient.
3) Realize that their sizing chart is about 1 size off (order a size smaller, IMO)
4) Be patient.
5) Love your LBS for being patient with you and helping you get an awesome bike.
So this has been a long time coming, but I figured I’d post a few pics and the build sheet as this is to be my main commuter. The commute is 6.5 miles, 99% on road, 5 days a week. I wanted to build something that could be robust all season, take panniers and fenders, and be pretty fast for the occasional group ride/sprint tri/overnight tour. And if the local cyclocross circuit would let an amateur run a commuter with disc brakes, then that too. Pretty wide range of tasks, but I think it’s a nice compromise all together.
The 2007 Romax frame got the call because of the sloping top tube, disc tabs, rack mounts, cyclocross geometry, all at the right price. The Spinergy wheels were an ebay find prior to settling on a frame, and I haven’t seen anything like them anywhere (700c 32h disc wheels below 1700g). Avid BB7’s, FSA crankset, Xpedo pedals, allen skewers and the Selle Italia were the logical choices. For my commute that is mostly all pavement, I could have gone with a true touring/road tire, but I wanted to keep it a little ‘cross, hence the Vittorias. I’ll probably end up on some Schwalbe touring tire in a few months, but these are fun for now. Great in grass/hard pack dirt. The SRAM Rival group was probably a deviation from common logic (and my LBS’s love for Shimano), but the solid feel of the brake levers, aero cabling look, weight, and wanting to be different made that selection. The Salsa bars are HUGE, but I’m loving the many hand positions they offer. The LBS owner commented that they’re nearly MTB bar width if you grab them like they’re bar ends, offering some really useful leverage.
He is a smidge over 21# in current form, and the racks and fenders are going on in a few days. The LBS has dubbed him “Cry Baby”, because that’s what they called me when I whined about my bike not being here for 3 months. I think it suits the blue well. I ordered a 56cm, which should be way too small by their sizing chart as I’m 6’1”, with a 33” inseam, but the standover is perfect. I went with a 130mm stem to get me a little over the bars, but that might be overkill, so we’ll see if I need to go back to the 100mm after riding it a bit fully loaded.
Build sheet:
SRAM Rival Shifters
SRAM Rival rear derailleur
SRAM Force front derailleur
SRAM PC1070 10sp chain
SRAM OG1070 cassette
Avid BB7 Road Front Brake
Avid BB7 Road Rear Brake
Thomson Elite Stem
Ritchey comp seatpost
Selle Italia Gel Flow Black
seatpost clamp
FSA Gossamer Compact
xpedo SS pedals
Vittoria EVO Cross XN
tubes
Skewers (allen)
Headset
bar tape
Spinergy Xyclone wheelset
Salsa Moto Ace Bell Lap Handlebar
2007 Brodie Romax Frame & Fork
I’ll post some pics of it loaded up with the fenders and panniers later this week, but for now, here’s what I got:
For more pics (including ones of me being a dumbass and crashing it), click here.
Comments, suggestions, and general heckling is always welcome
#2
POWERCRANK addict
Join Date: Mar 2005
Location: North Acton, West London, UK
Posts: 3,783
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Congratulations, that's an awesome bike.
...and of course, your saddle's too high
...and of course, your saddle's too high
__________________
shameless POWERCRANK plug
Recommended reading for all cyclists - Cyclecraft - Effective Cycling
Condor Cycles - quite possibly the best bike shop in London
Don't run red lights, wear a helmet, use hand signals, get some cycle lights(front and rear) and, FFS, don't run red lights!
shameless POWERCRANK plug
Recommended reading for all cyclists - Cyclecraft - Effective Cycling
Condor Cycles - quite possibly the best bike shop in London
Don't run red lights, wear a helmet, use hand signals, get some cycle lights(front and rear) and, FFS, don't run red lights!
#3
Senior Member
Thread Starter
Join Date: Jul 2007
Posts: 194
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks man! It was pretty sweet on the commute this morning. Very fast, though I've still got some tweaking to do on the rear disc. I might have to go to the Nokon (sp?) housing, as it's just not nearly as crisp as the front. We'll see how it does with some weight on it when the Ortliebs go on.
And the saddle suits me just fine at that level, thank you very much!
And the saddle suits me just fine at that level, thank you very much!
#4
Senior Member
Thread Starter
Join Date: Jul 2007
Posts: 194
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I did pretty good on the group ride yesterday with it. A few 16# carbon bikes set a brutal pace, but as the only cyclocross/commuter bike (and the only bike over 20#), I held my own I think. Apparently wearing a tshirt and gym shorts isn't the way to go on group rides either. Oh well, my 3W LED helmet light was pretty sweet on the way home
Still dialing in the BB7's. They're a bit tricky to set up right, as you have to center the caliper on the rotor, then adjust both pad's initial position, and then the cable tension. The back one is much better than it was, and the front one is good, but I'm expecting it to be stellar. They were dragging in the front a bit yesterday, but they're a little better today. We'll see
Still dialing in the BB7's. They're a bit tricky to set up right, as you have to center the caliper on the rotor, then adjust both pad's initial position, and then the cable tension. The back one is much better than it was, and the front one is good, but I'm expecting it to be stellar. They were dragging in the front a bit yesterday, but they're a little better today. We'll see
#6
not a role model
Join Date: Oct 2006
Location: Portland, OR
Posts: 4,659
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Still dialing in the BB7's. They're a bit tricky to set up right, as you have to center the caliper on the rotor, then adjust both pad's initial position, and then the cable tension. The back one is much better than it was, and the front one is good, but I'm expecting it to be stellar. They were dragging in the front a bit yesterday, but they're a little better today. We'll see
#7
Capt Sensible
Join Date: Sep 2004
Location: Vancouver, Canada
Posts: 79
Bikes: Kona Sutra, Cramerroti 650C
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Very nice. I like the clean look of the cable routing with SRAM brifters. It's interesting that Brodie have dropped the disc brakes for canti's for UCI compliance on the 2008 Romax. There's also a scandium "Romax B" frame for 2008.
#8
Senior Member
Thread Starter
Join Date: Jul 2007
Posts: 194
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The removal of the discs is a shame, IMO. But I understand the economics of not wanting to have a bike at that pricepoint that you can't race legally. That has to be a pretty limited market (me!) Regarding the Scandium Brodie B team frame, it's goregous in person. There's a 58cm one in my LBS that they sent me by mistake, which ended up being a good thing because we figured they run a size off. So now I'm rocking a boring Aluminum Romax instead of a Scandium Romax B team, but at least it's the right size. And if anybody wants a 58cm Scandium Cyclocross Frame, let me know, because it's just going to sit at the LBS for a while it looks like...It's really, really light.
#10
Senior Member
Thread Starter
Join Date: Jul 2007
Posts: 194
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I went down to a 100mm stem and I'm not as stretched out as I was. Now I just have to find a home for a 130mm 10deg 26mm Thompson Stem...probably the same place I found it: ebay!
#12
Senior Member
Join Date: Apr 2003
Location: Houston we have a problem
Posts: 2,914
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
That's a beauty of a bike! Congrats!
But how's the aluminum frame/aluminum fork feel?
I couldn't do that with the roads around here... ouch!
But how's the aluminum frame/aluminum fork feel?
I couldn't do that with the roads around here... ouch!
#14
Senior Member
Thread Starter
Join Date: Jul 2007
Posts: 194
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts