Helmet light recommendation?
#1
Senior Member
Thread Starter
Join Date: Jul 2008
Posts: 152
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Helmet light recommendation?
Hi all. I just bought a Specialized Tricross and due to the brake levers on the handlebars do not have room for a handlebar mounted headlight. I'm sure I will figure out something eventually but for now am wondering about helmet mounted lights? Can anyone recommend a good one or have any experiences they can share with helmet mounted lights?
#3
Senior Member
Join Date: Mar 2008
Location: Binghamton, NY
Posts: 2,896
Bikes: Workcycles FR8, 2016 Jamis Coda Comp, 2008 Surly Long Haul Trucker
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 6 Times
in
5 Posts
I've attached fenix olights using the twofish lockblock mounted to a giro hex helmet. It was lightweight and barely noticed it. I've never ridden with a bigger flashlight mounted to it, but it should work.
#4
Member
Join Date: Jan 2008
Location: Vancouver
Posts: 25
Bikes: SteelWool Tweed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use a Cygolight MityCross 350
https://www.cygolite.com/products/index.html
For me it was worth the cost. Bought it at REI.
I get 2+ hrs full burn time. Ample for my pre dawn and and late night commute.
No issues. If anything the Velcro straps could be longer. They are just long enough for my helmet.
Shawn
https://www.cygolite.com/products/index.html
For me it was worth the cost. Bought it at REI.
I get 2+ hrs full burn time. Ample for my pre dawn and and late night commute.
No issues. If anything the Velcro straps could be longer. They are just long enough for my helmet.
Shawn
#5
Bike ≠ Car ≠ Ped.
I got a Light & Motion Vis 360 earlier this month. Best rig yet on the market, IMO. Light, bright, good run times.
https://www.bikelights.com/vis360.html
https://www.bikelights.com/vis360.html
#6
Senior Member
Join Date: Dec 2010
Location: Tahoe
Posts: 142
Bikes: Motobecane Single Speed, Trek Mountain Track Xtracycle
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have threaded the elastic to a headlamp through the vent holes of my helmet and then put the lamp back on. Bought at Home Depot for the amazing price of 3 for 8.00. They are bright and easy to change batteries in and light enough to not be a burden to my neck.
You could even mount two on the same elastic for brighter light.
You could even mount two on the same elastic for brighter light.
#7
Old. Slow. Happy.
Join Date: Jan 2010
Location: Boulder County, CO
Posts: 1,797
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Having your main light on the helmet isn't the best setup. Consider mounting the main light on the fork blade or fork crown instead. The lower you mount the light, the better it does at forming shadows, which help you discern pot holes, rocks, and other obstacles.
That said, for (secondary) helmet lights, I like Princeton Tec's EOS.
That said, for (secondary) helmet lights, I like Princeton Tec's EOS.
#8
Senior Member
Thread Starter
Join Date: Jul 2008
Posts: 152
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hmmm..thanks for the info guys. I like the idea of mounting a light lower on the bike and then having another on the helmet.
#9
Senior Member
Lights on the helmet and bars (or lower in your case) is a great combo.
I use the Cygolite Expilion 250, which is bright and comes with a helmet mount. The supplied mount is nice because you can easily remove the light for daytime riding and is adjustable up and down depending on oncoming traffic. At 130g, it's almost unnoticeable, runs 3 hours on high, and has a nice beam pattern.
https://www.rei.com/product/807968
The reviews on the REI website are a little misleading with respect to the mount. It is tight at first, but with use, works much more easily. I think many gave up too quickly, and should have used it for longer.
I use the Cygolite Expilion 250, which is bright and comes with a helmet mount. The supplied mount is nice because you can easily remove the light for daytime riding and is adjustable up and down depending on oncoming traffic. At 130g, it's almost unnoticeable, runs 3 hours on high, and has a nice beam pattern.
https://www.rei.com/product/807968
The reviews on the REI website are a little misleading with respect to the mount. It is tight at first, but with use, works much more easily. I think many gave up too quickly, and should have used it for longer.
Last edited by alan s; 01-20-11 at 03:57 PM.
#10
I am a caffine girl
Join Date: Nov 2009
Location: Bay Area
Posts: 1,815
Bikes: 2012 Stumpjumper FSR Comp...2010 Scott CR1 CF...2007 Novara FS Float2.0...2009 Specialized Hardrock Disc...2009 Schwinn Le Tour GSr
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
S Mini 350 manufactor rated lumens on helmet for dirt trail. 3 hrs runtime on single 18650. Two of these will be as bright as a MS900 light. Otherwise a MG P Rocket XPG 450 manufactor rated lumen also from shining beam. If you want pure throw and can bear the weight, than a MG X Thrower SST 50 manufactor rated 800 lumen.
That being said, all light mention takes 18650 battery and some folks are not comfy using those cells. However they are great for their selection and price.
That being said, all light mention takes 18650 battery and some folks are not comfy using those cells. However they are great for their selection and price.
#11
Old. Slow. Happy.
Join Date: Jan 2010
Location: Boulder County, CO
Posts: 1,797
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
If you're going to be riding primarily on pavement, I recommend a light with a focused beam such as the ones offered by Busch & Muller.
My main light (B&M IQ Cyo R) mounted on the fork crown:
Secondary light (Planet Bike 2W Blaze) mounted on front low-riders:
Although my main light is dynohub powered, a battery-powered version is also available (B&M Ixon IQ). The above combo puts the light exactly where I need it, and because I run the 2W Blaze on "low," the batteries last a very long time. I use the helmet-mounted EOS when I know I'll need to read a lot of street signs, etc.
My main light (B&M IQ Cyo R) mounted on the fork crown:
Secondary light (Planet Bike 2W Blaze) mounted on front low-riders:
Although my main light is dynohub powered, a battery-powered version is also available (B&M Ixon IQ). The above combo puts the light exactly where I need it, and because I run the 2W Blaze on "low," the batteries last a very long time. I use the helmet-mounted EOS when I know I'll need to read a lot of street signs, etc.
#12
Bike ≠ Car ≠ Ped.
One way to mount a light to the bars, depending on how much room you've got by the levers, would be an auxiliary mounting bar. Supernova has one (it's the first that popped into my head -- https://www.supernova-lights.com/en/t.../mounting.html ), but there are a bunch of other brands that sell them, too.
#13
Senior Member
How closely are the interrupter levers mounted to the stem? My commuter has interrupters and there is plenty of room for a light on each side of the stem. Alternative might be to see if you could unwrap the bars a bit, shorten the housing between brake levers and interrupters then slide the interrupters a bit further from the stem to open up some real estate for lights.
#14
Senior Member
Thread Starter
Join Date: Jul 2008
Posts: 152
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If you're going to be riding primarily on pavement, I recommend a light with a focused beam such as the ones offered by Busch & Muller.
My main light (B&M IQ Cyo R) mounted on the fork crown:
Secondary light (Planet Bike 2W Blaze) mounted on front low-riders:
Although my main light is dynohub powered, a battery-powered version is also available (B&M Ixon IQ). The above combo puts the light exactly where I need it, and because I run the 2W Blaze on "low," the batteries last a very long time. I use the helmet-mounted EOS when I know I'll need to read a lot of street signs, etc.
My main light (B&M IQ Cyo R) mounted on the fork crown:
Secondary light (Planet Bike 2W Blaze) mounted on front low-riders:
Although my main light is dynohub powered, a battery-powered version is also available (B&M Ixon IQ). The above combo puts the light exactly where I need it, and because I run the 2W Blaze on "low," the batteries last a very long time. I use the helmet-mounted EOS when I know I'll need to read a lot of street signs, etc.
#15
Senior Member
I run two minewt minis, one on the bars and one on the helmet.They are not heavy and throw a good beam, The new ones are 150W and are now cordless. The helmet one is great for getting the drivers attention. About $ 100 each.
#16
Descends like a rock
I've quit using my headlight, but I may go back to it. It sounds ghetto, but the best mount I found was to wrap the flashlight with velcro and put a strip on the helmet. You can just grab it and jank it off or stick it back on while riding. The industrial strength stuff is plenty strong - kept it tight and snug to the helmet with out it bobbling around.
#17
Older than dirt
Join Date: May 2008
Location: Winchester, VA
Posts: 5,342
Bikes: Too darn many.. latest count is 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I got a Light & Motion Vis 360 earlier this month. Best rig yet on the market, IMO. Light, bright, good run times.
https://www.bikelights.com/vis360.html
https://www.bikelights.com/vis360.html
#18
Older than dirt
Join Date: May 2008
Location: Winchester, VA
Posts: 5,342
Bikes: Too darn many.. latest count is 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
How closely are the interrupter levers mounted to the stem? My commuter has interrupters and there is plenty of room for a light on each side of the stem. Alternative might be to see if you could unwrap the bars a bit, shorten the housing between brake levers and interrupters then slide the interrupters a bit further from the stem to open up some real estate for lights.
#19
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,362
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6218 Post(s)
Liked 4,217 Times
in
2,364 Posts
Hi all. I just bought a Specialized Tricross and due to the brake levers on the handlebars do not have room for a handlebar mounted headlight. I'm sure I will figure out something eventually but for now am wondering about helmet mounted lights? Can anyone recommend a good one or have any experiences they can share with helmet mounted lights?
On mounting, I've tried the low mount like MileHighMark suggest and never liked the results. Shadows are too elongated with a low mount light for my tastes. Off-road, those shadows hide all kinds of stuff that I'd rather not run into. Try carrying a flashlight at knee level to see what it looks like.
Many lights have helmet mount options. The Magicshine comes with a helmet mount and it's a good light. Unfortunately, Geoman is not selling them right now because of battery issues. The Gemini Titan is a bit more expensive than the Magicshine but it doesn't look too bad.
There are other ways of mounting to the bars, too. The Minoura Space Grip can be mounted to the bars and moved around so that it doesn't interfere with the interrupter levers. Here's what it looks like
Paul's Components makes a top cap replacement that has a light mount on it. Not cheap and it looks dorky but it would get the job done.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#20
Senior Member
Join Date: May 2007
Location: Raleigh, NC
Posts: 8,896
Bikes: Waterford RST-22, Bob Jackson World Tour, Ritchey Breakaway Cross, Soma Saga, De Bernardi SL, Specialized Sequoia
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 196 Post(s)
Likes: 0
Liked 6 Times
in
4 Posts
I use a Fenix LD20 on my helmet, but it's really more of a backup or secondary light. It's actually bright enough to use by itself, but may not provide enough lumens for some. The nice thing about helmet lights is that you can look at drivers pulling out from side streets, parking lots, etc., and freeze them in their tracks. However, they are not as effective at lighting up the road ahead, IMHO.
I just ordered a Light & Motion Stella 300, which can be mounted on helmet or handlebar. That would be a good option to consider because they are high quality, relatively light weight, provide good mounting options and recharge relatively quick. If you shop around, you can find excellent prices.
I just ordered a Light & Motion Stella 300, which can be mounted on helmet or handlebar. That would be a good option to consider because they are high quality, relatively light weight, provide good mounting options and recharge relatively quick. If you shop around, you can find excellent prices.
#21
Old. Slow. Happy.
Join Date: Jan 2010
Location: Boulder County, CO
Posts: 1,797
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
To the OP:
If you do consider a helmet-mounted light, try to find the lightest (weight) one. I barely notice the added weight of my EOS, but definitely notice the extra weight when I use my Dinotte or Amoeba.
If you do consider a helmet-mounted light, try to find the lightest (weight) one. I barely notice the added weight of my EOS, but definitely notice the extra weight when I use my Dinotte or Amoeba.
#22
Senior Member
Thread Starter
Join Date: Jul 2008
Posts: 152
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
That Minoura space grip might do the trick. Thanks! Based on responses here I think I want a headlamp light and another light..either with the space grip or lower down on the front of the bike.
#23
Descends like a rock
Yes, it really gets driver's attention. Its also good when you want to look at something off to the side, just dont use it on group rides
#25
all-weather commuter
Join Date: Mar 2009
Location: Rochester, NY
Posts: 315
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I mount Ay-Up lights (https://www.ayup-lights.com/) to my helmet, and love them. They comes with a long cable so I can put the battery in my pocket, so there is very little additional weight on my head. Easy to put on and off, bright, and light. Not cheap though.