Budget geared commuting bike
11-10-12, 01:13 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2012
Location: Las Vegas, NV
Posts: 76
Bikes: Pure Fix Romeo
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Budget geared commuting bike
What gear commuting bike would you guys recommend? I currently have a fixed/single speed bike that I use for commuting, but I feel better off with geared bike since there is uphills I have to go against and winds also. I would like a bike with the fixed/single-speed frame.
My budget would be around $350ish.
Prefer size: 47cm
Thank you!
My budget would be around $350ish.
Prefer size: 47cm
Thank you!
Last edited by SinX7; 11-10-12 at 01:19 PM.
11-10-12, 01:28 PM
#2
Senior Member
Join Date: Nov 2007
Location: Santa Fe, NM
Posts: 4,599
Bikes: Vassago Moosknuckle Ti 29+ XTR, 90's Merckx Corsa-01 9sp Record, PROJECT: 1954 Frejus SuperCorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 174 Post(s)
Liked 157 Times
in
75 Posts
You could easily convert your current bike to an internally-geared hub for the budget you stipulate. The bike would have a similar aesthetic to your fixie - simple chain line. That's what I'd do.
It is difficult to get much of a bike for $350 in the new market, and if you hunt around you can find a decent bike on the used market.
If by "fixie/single speed" frame, you are referring to rear track forks (axle slot to the rear) the only ones like that that I know have derailleur hangers would be Surly and On One.
If you simply mean "road type frame", then derailleurs (gears) are more easily accommodated. Here's a pretty decent deal for a new bike: https://www.bikesdirect.com/products/...e_xi_steel.htm
I lived in Vegas for a couple of years and commuted. I lived in Summerlin and worked on the valley (not the strip), with about 800 feet difference, so my ride home involved a pretty steady low-grade incline.
Technically, a 3-speed hub would do the trick and offer the most simplicity.
If you want to stay fixie, Sturmey Archer makes a 3 speed fixed gear hub (the S3X) that offers sufficient gear range to get you where you need to go, IMO. I've used one and found it to work great. Some freewheels will also fit, so running the hub with a FW is an option too.
It is difficult to get much of a bike for $350 in the new market, and if you hunt around you can find a decent bike on the used market.
If by "fixie/single speed" frame, you are referring to rear track forks (axle slot to the rear) the only ones like that that I know have derailleur hangers would be Surly and On One.
If you simply mean "road type frame", then derailleurs (gears) are more easily accommodated. Here's a pretty decent deal for a new bike: https://www.bikesdirect.com/products/...e_xi_steel.htm
I lived in Vegas for a couple of years and commuted. I lived in Summerlin and worked on the valley (not the strip), with about 800 feet difference, so my ride home involved a pretty steady low-grade incline.
Technically, a 3-speed hub would do the trick and offer the most simplicity.
If you want to stay fixie, Sturmey Archer makes a 3 speed fixed gear hub (the S3X) that offers sufficient gear range to get you where you need to go, IMO. I've used one and found it to work great. Some freewheels will also fit, so running the hub with a FW is an option too.
Last edited by canyoneagle; 11-10-12 at 01:32 PM.
11-14-12, 03:37 AM
#3
Gearhead
Join Date: Feb 2008
Location: Chatsworth, Ga.
Posts: 236
Bikes: 1982 Schwinn Sidewinder, Sun EZ-1 Recumbent, Cannondale R-400
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 10 Times
in
8 Posts
I wouldn't even consider a commuter bike with less than 10 speeds, or without Alpine gearing. Even without hills, there will be all kinds of different riding situations...traffic, weather, etc.....
11-14-12, 03:46 AM
#4
Banned
that's tough. 350USD isn't much money.
IMHO, this seems to great value for money (450 USD)
https://www.breezerbikes.com/bikes/details/downtown_ex
IMHO, this seems to great value for money (450 USD)
https://www.breezerbikes.com/bikes/details/downtown_ex
11-14-12, 07:12 AM
#5
Tractorlegs
Join Date: Oct 2011
Location: El Paso, TX
Posts: 3,185
Bikes: Schwinn Meridian Single-Speed Tricycle
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 119 Post(s)
Liked 60 Times
in
42 Posts
Giant Escape - I got mine new for $420, 24 speed (3 x 8), very dependable. For the price it's a monster and commutes very well. I got the 2012 model, but I think the 2013s are out and may have different pricing but it's something you may want to look at. 
__________________
********************************
Trikeman
Trikeman
11-14-12, 07:16 AM
#6
Senior Member
Join Date: Mar 2010
Location: Bremen, Germany
Posts: 365
Bikes: Poison Chinin IGH
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
)I do find this downgrading somewhat funny, but can't help it
+1 to 3sp IGH
11-14-12, 09:01 AM
#7
Carpe Velo
Join Date: Dec 2011
Location: Fort Worth, Texas
Posts: 2,519
Bikes: 2000 Bianchi Veloce, '88 Schwinn Prologue, '90 Bianchi Volpe,'94 Yokota Grizzly Peak, Yokota Enterprise, '16 Diamondback Haanjo, '91 Bianchi Boardwalk, Ellsworth cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 14 Times
in
13 Posts
80's or 90's vintage hardtail mountain bikes make great commuters. Inexpensive, capable and plentiful on the used market. They don't have the look you want, however. I have an '88 Trek 900 converted with drops and street tires.
11-14-12, 11:59 AM
#8
Banned
Join Date: May 2011
Location: Northern California
Posts: 5,804
Bikes: Raleigh Grand Prix, Giant Innova, Nishiki Sebring, Trek 7.5FX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You could easily convert your current bike to an internally-geared hub for the budget you stipulate. The bike would have a similar aesthetic to your fixie - simple chain line. That's what I'd do.
It is difficult to get much of a bike for $350 in the new market, and if you hunt around you can find a decent bike on the used market.
If by "fixie/single speed" frame, you are referring to rear track forks (axle slot to the rear) the only ones like that that I know have derailleur hangers would be Surly and On One.
If you simply mean "road type frame", then derailleurs (gears) are more easily accommodated. Here's a pretty decent deal for a new bike: https://www.bikesdirect.com/products/...e_xi_steel.htm
I lived in Vegas for a couple of years and commuted. I lived in Summerlin and worked on the valley (not the strip), with about 800 feet difference, so my ride home involved a pretty steady low-grade incline.
Technically, a 3-speed hub would do the trick and offer the most simplicity.
If you want to stay fixie, Sturmey Archer makes a 3 speed fixed gear hub (the S3X) that offers sufficient gear range to get you where you need to go, IMO. I've used one and found it to work great. Some freewheels will also fit, so running the hub with a FW is an option too.
It is difficult to get much of a bike for $350 in the new market, and if you hunt around you can find a decent bike on the used market.
If by "fixie/single speed" frame, you are referring to rear track forks (axle slot to the rear) the only ones like that that I know have derailleur hangers would be Surly and On One.
If you simply mean "road type frame", then derailleurs (gears) are more easily accommodated. Here's a pretty decent deal for a new bike: https://www.bikesdirect.com/products/...e_xi_steel.htm
I lived in Vegas for a couple of years and commuted. I lived in Summerlin and worked on the valley (not the strip), with about 800 feet difference, so my ride home involved a pretty steady low-grade incline.
Technically, a 3-speed hub would do the trick and offer the most simplicity.
If you want to stay fixie, Sturmey Archer makes a 3 speed fixed gear hub (the S3X) that offers sufficient gear range to get you where you need to go, IMO. I've used one and found it to work great. Some freewheels will also fit, so running the hub with a FW is an option too.
11-14-12, 02:18 PM
#9
Gearhead
Join Date: Feb 2008
Location: Chatsworth, Ga.
Posts: 236
Bikes: 1982 Schwinn Sidewinder, Sun EZ-1 Recumbent, Cannondale R-400
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 10 Times
in
8 Posts
Wow! I must really be in the budget barn. I have 6 bikes, and only two were purchased new.
'93 Specialized Crossroads.....$199.00 ( add used Nordic Track trailer......$50.00 at a flea market)
'83 Schwinn Sidewinder.......$149.00
My used bikes are as follows:
'86 Cannondale Criterium $125.00 at a pawn shop in 2006
'85 Giant Rincon $25.00 at a flea market in 2001
'62 Schwinn Varsity $10.00 bought from a neighbor in 1966
'81 Torpado (all Campy) $50.00 at a flea market in 1989
If I ever had $350.00 to spend on a bike, I would be in heaven.......
Look for a good used bike. They are all over the place.
'93 Specialized Crossroads.....$199.00 ( add used Nordic Track trailer......$50.00 at a flea market)
'83 Schwinn Sidewinder.......$149.00
My used bikes are as follows:
'86 Cannondale Criterium $125.00 at a pawn shop in 2006
'85 Giant Rincon $25.00 at a flea market in 2001
'62 Schwinn Varsity $10.00 bought from a neighbor in 1966
'81 Torpado (all Campy) $50.00 at a flea market in 1989
If I ever had $350.00 to spend on a bike, I would be in heaven.......
Look for a good used bike. They are all over the place.
that's tough. 350USD isn't much money.
IMHO, this seems to great value for money (450 USD)
https://www.breezerbikes.com/bikes/details/downtown_ex
IMHO, this seems to great value for money (450 USD)
https://www.breezerbikes.com/bikes/details/downtown_ex
11-14-12, 03:14 PM
#10
Senior Member
Join Date: Apr 2010
Location: Warwick, UK
Posts: 1,049
Bikes: 2000-something 3 speed commuter, 1990-something Raleigh Scorpion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Option 1: Buy used mountain bike. Fit fenders and slick tyres. Profit.
Option 2: Buy 3-speed IGH and related hardware. Build into a wheel and fit to existing bike, with 3rd gear set up to be the level-ground gear. Profit.
I may have lied about the profit part
Option 2: Buy 3-speed IGH and related hardware. Build into a wheel and fit to existing bike, with 3rd gear set up to be the level-ground gear. Profit.
I may have lied about the profit part
11-14-12, 03:41 PM
#11
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
+1 to a 3-speed IGH for all the reasons canyoneagle mentioned. If a FG/SS currently gets you everywhere you need to go, it doesn't take much gear range to make it that much nicer.
11-14-12, 04:25 PM
#12
Senior Member
Join Date: Jul 2008
Location: Atlanta
Posts: 866
Bikes: LHT
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Why not just lower the gear ratio on the single speed to match the terrain? You can ride just about anything with a 42 17 combo and 700c wheels. The steep stuff you have to stand on, but you get used to it. Drop bars for the wind.
11-14-12, 04:39 PM
#13
Senior Member
Join Date: Nov 2007
Location: Santa Fe, NM
Posts: 4,599
Bikes: Vassago Moosknuckle Ti 29+ XTR, 90's Merckx Corsa-01 9sp Record, PROJECT: 1954 Frejus SuperCorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 174 Post(s)
Liked 157 Times
in
75 Posts
Wow! I must really be in the budget barn. I have 6 bikes, and only two were purchased new.
'93 Specialized Crossroads.....$199.00 ( add used Nordic Track trailer......$50.00 at a flea market)
'83 Schwinn Sidewinder.......$149.00
My used bikes are as follows:
'86 Cannondale Criterium $125.00 at a pawn shop in 2006
'85 Giant Rincon $25.00 at a flea market in 2001
'62 Schwinn Varsity $10.00 bought from a neighbor in 1966
'81 Torpado (all Campy) $50.00 at a flea market in 1989
If I ever had $350.00 to spend on a bike, I would be in heaven.......
Look for a good used bike. They are all over the place.
'93 Specialized Crossroads.....$199.00 ( add used Nordic Track trailer......$50.00 at a flea market)
'83 Schwinn Sidewinder.......$149.00
My used bikes are as follows:
'86 Cannondale Criterium $125.00 at a pawn shop in 2006
'85 Giant Rincon $25.00 at a flea market in 2001
'62 Schwinn Varsity $10.00 bought from a neighbor in 1966
'81 Torpado (all Campy) $50.00 at a flea market in 1989
If I ever had $350.00 to spend on a bike, I would be in heaven.......
Look for a good used bike. They are all over the place.
Deals can still be found, but not nearly as easily as in the past.
11-14-12, 04:40 PM
#14
Banned
Pretty straight forward Bodge.. take an old freewheel bike, I got a hold of a 5 speed ,
re tension the spokes , to takeout the Dish, add a 1 speed freewheel
and line it up with the 1 chainring you will use Up front.
I think I spent under $50, because I needed a seatpost as well as the freewheel.
Mine started out as a boat anchor Schwinn Mesa Runner.
re tension the spokes , to takeout the Dish, add a 1 speed freewheel
and line it up with the 1 chainring you will use Up front.
I think I spent under $50, because I needed a seatpost as well as the freewheel.
Mine started out as a boat anchor Schwinn Mesa Runner.
