Carry around pump for commuting?
#1
Senior Member
Thread Starter
Carry around pump for commuting?
I had a problem the other day when I got a flat on my commuter. I carry around a mini pump that is great for pumping up my 700x23 road tires but is almost impossible to use on my 26x1.5 commuter tires. My hands just couldn't keep pumping long enough to get the tire up to at least rideable pressure. I tried canisters many years ago but didn't like the waste, plus they got expensive, and when you have to do it twice that's even more waste.
What pumps do you guys recommend in a mid size? I'm willing to frame mount it on my commuter, which is decked out in full Fredliness anyway (except NO MIRRORS!) I'd keep my mini pump for my road bike. I think the mini is a Lezyne FWIW.
What pumps do you guys recommend in a mid size? I'm willing to frame mount it on my commuter, which is decked out in full Fredliness anyway (except NO MIRRORS!) I'd keep my mini pump for my road bike. I think the mini is a Lezyne FWIW.
#2
Senior Member
Join Date: Nov 2009
Posts: 132
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Pumps are generally high-pressure or high-volume (Yeah, some take a hack at being both and some are in-between), it sounds like you have a high-pressure one that is a bit slow for the MTB. You should be able to find one that will work nicely on the bigger tires. I carry a blackburn Mtn Air pump with my commuter, it is about 10 inches long and and 1.5 inches or so wide. It works sufficiently well that I haven't desired to replace it.
#3
Formerly Known as Newbie
Join Date: Mar 2002
Location: Helsinki, Finland
Posts: 6,249
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
I have a floor pump at home, and a Topeak on frame. I think the Topeak is an older generation Master Blaster, about 25cms in length. It does the job, except for Dunlop valves in my SO's city bike.
--J
--J
__________________
To err is human. To moo is bovine.
Who is this General Failure anyway, and why is he reading my drive?
Become a Registered Member in Bike Forums
Community guidelines
To err is human. To moo is bovine.
Who is this General Failure anyway, and why is he reading my drive?
Become a Registered Member in Bike Forums
Community guidelines
#4
Señior Member
Join Date: Sep 2005
Location: Michigan
Posts: 13,749
Bikes: Windsor Fens, Giant Seek 0 (2014, Alfine 8 + discs)
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
Topeak road morph. Every time this question comes up, everyone and their dog recommends the Road Morph. So assume I have now said it 25 times.
I like the one with the built in gauge.
Oh, and a Topeak Joe Blow in the garage. it's awesome. I use a pocket rocket on the road bike.
I like the one with the built in gauge.
Oh, and a Topeak Joe Blow in the garage. it's awesome. I use a pocket rocket on the road bike.
__________________
Work: the 8 hours that separates bike rides.
Work: the 8 hours that separates bike rides.
#5
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,334
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6192 Post(s)
Liked 4,190 Times
in
2,351 Posts
Topeak road morph. Every time this question comes up, everyone and their dog recommends the Road Morph. So assume I have now said it 25 times.
I like the one with the built in gauge.
Oh, and a Topeak Joe Blow in the garage. it's awesome. I use a pocket rocket on the road bike.
I like the one with the built in gauge.
Oh, and a Topeak Joe Blow in the garage. it's awesome. I use a pocket rocket on the road bike.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#6
Señior Member
Join Date: Sep 2005
Location: Michigan
Posts: 13,749
Bikes: Windsor Fens, Giant Seek 0 (2014, Alfine 8 + discs)
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
Hm. 1.5" is about 35mm, right? I use the road morph on a 700c x 40 tire which I would think has even more volume, and I have no problems with it. I don't know though, I don't have any 26" bikes.
__________________
Work: the 8 hours that separates bike rides.
Work: the 8 hours that separates bike rides.
#7
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,439
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4217 Post(s)
Liked 2,940 Times
in
1,800 Posts
I have one of these and it's worked well enough the few times I've flatted with my 26x1.3 tires. Now I need to figure out how to flip the internals as I've switched to wheels with Presta valves. I know I saved the bit of the back of the packaging that told me how to do that, but I just need to figure out where I "saved" it to.
__________________
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),1990 Concorde Aquila(hit by car while riding), others in build queue "when I get the time"
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),
#8
Senior Member
Join Date: Nov 2010
Location: Along the Rivers of Pittsburgh
Posts: 1,255
Bikes: 2011 Novara Forza Hybrid, 2005 Trek 820, 1989 Cannondale SR500 Black Lightning, 1975 Mundo Cycles Caloi Racer
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 258 Post(s)
Liked 291 Times
in
157 Posts
I have one of these and it's worked well enough the few times I've flatted with my 26x1.3 tires. Now I need to figure out how to flip the internals as I've switched to wheels with Presta valves. I know I saved the bit of the back of the packaging that told me how to do that, but I just need to figure out where I "saved" it to.
#9
Senior Member
I use a Lezyne HP pump. 400 pumps will get a large volume tire up to sufficient pressure. Also have CO2 for quicker inflation (top off) if the weather is bad.
#10
Senior Member
Thread Starter
Thanks all. My guess is that the Road Morph would work well enough and is lighter, but the Mountain Morph would work a bit quicker. I like the gauge models too. They claim up to 140psi, but if you need to be Superman to do it, that doesn't help me. For MTB tires I only need up to 80 or so anyway.
Since I doubt I'd carry it with my road bike I think I'll go with the Mountain version. I'll have to try one at the shop.
Since I doubt I'd carry it with my road bike I think I'll go with the Mountain version. I'll have to try one at the shop.
#11
Senior Member
Join Date: Aug 2012
Location: Lancaster, PA, USA
Posts: 1,851
Bikes: 2012 Trek Allant, 2016 Bianchi Volpe Disc
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have a cheapo one from Walmart that works fine on my 700x32 tires. Are you sure your current pump has a good seal?
#12
Old, but not really wise
Join Date: Jul 2010
Location: Fairfax, VA commuting to Washington DC
Posts: 814
Bikes: 2010 Kona Dew Drop (the daily driver),'07 Specialized Roubaix (the sports car), '99 ish Kona NuNu MTB (the SUV), Schwinn High Plains (circa 1992?) (the beater)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
FWIW I've used my Road Morph on MTB tires and it works well enough. I'm sure the Mt. Morph is faster, but if I had multiple bikes, I'd err on the side of the Road version. It is good enough that I regularly use it instead of bothering to get out my floor pump.
#13
www.ocrebels.com
Join Date: Aug 2006
Location: Los Angeles area
Posts: 6,186
Bikes: Several bikes, Road, Mountain, Commute, etc.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 83 Post(s)
Likes: 0
Liked 5 Times
in
2 Posts
I use a Topeak Road Master Blaster which works well on my 700 x 23 tires. It is a mini-pump and it seems to be a good one; given me many years of good service. My floor pump (at home) is also a Topeak, but a Joe Blow Pro model.
Rick / OCRR
Rick / OCRR
#14
Senior Member
Join Date: May 2007
Location: Raleigh, NC
Posts: 8,896
Bikes: Waterford RST-22, Bob Jackson World Tour, Ritchey Breakaway Cross, Soma Saga, De Bernardi SL, Specialized Sequoia
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 196 Post(s)
Likes: 0
Liked 6 Times
in
4 Posts
Another vote for the Road Morph. In addition to pumping very well, it also has a pressure gauge, which is nice. I started carrying a pump after getting two flats on the same commute and running out of CO2 cartridges, forcing me to walk 3.5 miles home in my cycling shoes. I still carry a CO2 for convenience, but keep the pump as a backup.
#15
Senior Member
+1 on the road morph for road, commuter, and mountain bikes. Well designed, the little footpad makes it worlds easier than "hands only" mini pumps. My commuter has 26x1.5 tires, and it works great with those as well...
#16
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,886
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 1,919 Times
in
1,203 Posts
+1 more on the Road Morph. Great pump.
Gauge is finicky to read with bifocals, you may want to learn what 85 psi (or your preferred pressure) is in bars.
Gauge is finicky to read with bifocals, you may want to learn what 85 psi (or your preferred pressure) is in bars.
#17
Senior Member
Didn't read the whole thread.
I use a Road Morph, anyone mention it yet??
That's only if my first option, cell phone, fails.
I use a Road Morph, anyone mention it yet??
That's only if my first option, cell phone, fails.
#18
Kit doesn't match
#20
Senior Member
Thread Starter
Well then, I guess I'll get the Road Morph, especially since the LBS has it.
#21
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,439
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4217 Post(s)
Liked 2,940 Times
in
1,800 Posts
I recently picked up a Lezyne Micro Floor Drive HPG. I wouldn't say I'm looking forward to trying it as you never want to need to use one of these, but I'll be interested to see how it compares to my mountain morph. Sure is prettier.
__________________
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),1990 Concorde Aquila(hit by car while riding), others in build queue "when I get the time"
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),
#22
Señior Member
Join Date: Sep 2005
Location: Michigan
Posts: 13,749
Bikes: Windsor Fens, Giant Seek 0 (2014, Alfine 8 + discs)
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
I like the Road Morph, I don't care what any of you guys say.
__________________
Work: the 8 hours that separates bike rides.
Work: the 8 hours that separates bike rides.
#23
xtrajack
Join Date: Aug 2008
Location: Maine
Posts: 2,058
Bikes: Kona fire mountain/xtracycle,Univega landrover fs,Nishiki custom sport Ross professional super gran tour Schwinn Mesa (future Xtracycle donor bike)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have a Bio logic seatpost pump, The downside is that you have to take your seatpost off to use it. I also hve a Mountain morph pump. I usually use the Mountain Morph just because it it easier.
#24
Senior Member
Thread Starter
I bought a Road Morph G today. The guy at the shop said it was the only one that he recommends. All the rest just barely can pump a tire.
Since I seem to have lost the wrench that would fit the package mount, probably while I was struggling to fix a flat the other day, I haven't taken it out of the packaging yet to try it.
Since I seem to have lost the wrench that would fit the package mount, probably while I was struggling to fix a flat the other day, I haven't taken it out of the packaging yet to try it.
#25
Senior Member
I didn't use the mount with the cage bosses anyway. I zip-tied it under the bottom of the top tube. It's really out of the way there.