Best way to lock your bike in the city?
#1
Junior Member
Thread Starter
Join Date: Dec 2013
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Best way to lock your bike in the city?
Hey guys!
Long time lurker, first time poster here.
I currently use a single speed bike, which I built from scratch, and I use it to commute around the city every day.
After realizing my old lock was becoming rusted and wobbly, I decided to purchase a new lock. I did some research and purchased the ABUS Granit Futura lock.
I love the size and weight of the lock, but due to its small size I am unsure as to what the best way to lock up my bike is. So what are your suggestions for locking up a commuter bike in a large city? I would like to have something through both wheels (as I just spent a lot of money upgrading them)!
Thank you!
TL/DR - What is the best way to lock up your bike with a small lock
Long time lurker, first time poster here.
I currently use a single speed bike, which I built from scratch, and I use it to commute around the city every day.
After realizing my old lock was becoming rusted and wobbly, I decided to purchase a new lock. I did some research and purchased the ABUS Granit Futura lock.
I love the size and weight of the lock, but due to its small size I am unsure as to what the best way to lock up my bike is. So what are your suggestions for locking up a commuter bike in a large city? I would like to have something through both wheels (as I just spent a lot of money upgrading them)!
Thank you!
TL/DR - What is the best way to lock up your bike with a small lock
#2
Graybeard
Join Date: May 2009
Location: Middletown, RI
Posts: 17
Bikes: Spec. Diverge, Surly Karate Monkey, Surly Pacer (ret), Surly Cross Check (ret), Spec. Roubaix Comp (ret), Spec. Roubaix Triple (ret), Spec. Allez Compact Sport (ret), Trek 720 (ret), Lambert Super Sport (ret), CCM (ret), Concord Freedom Dlx (ret)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked 0 Times
in
0 Posts
#3
Senior Member
Well, if you want to lock your wheels you'll need a bigger lock. Or better, a second lock of another type, such as a Kryptonite NY Chain. Go to the KryptoniteLock website for lots of info on locking up a bike. (I am not a shill for them, just a user.)
#4
DancesWithSUVs
Join Date: Apr 2005
Location: Griffin Cycle Bethesda,MD
Posts: 6,983
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Good infographic:
Basically,you want to make sure that both wheel and the frame are locked. If your seatpost has a quick release,you'll want to replace it with a bolt.
Basically,you want to make sure that both wheel and the frame are locked. If your seatpost has a quick release,you'll want to replace it with a bolt.
__________________
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
#5
Banned
depends on Which City ..
I liked the Chain Link fencing and steel pipe towers that they built in the breezeways of the down town
Eugene Community college campus , you hung your bike up by the front wheel and then closed It
in the gate with the U lock. Or a serious Padlock .. under a security cam that had (?) EPD monitoring.
I liked the Chain Link fencing and steel pipe towers that they built in the breezeways of the down town
Eugene Community college campus , you hung your bike up by the front wheel and then closed It
in the gate with the U lock. Or a serious Padlock .. under a security cam that had (?) EPD monitoring.
#6
Senior Member
I wrote a blog post on bike theft prevention that might be of use:
https://roamblog.blogspot.com/2013/09...revention.html
https://roamblog.blogspot.com/2013/09...revention.html
#7
Banned.
Join Date: Sep 2013
Posts: 1,535
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I wrote a blog post on bike theft prevention that might be of use:
https://roamblog.blogspot.com/2013/09...revention.html
https://roamblog.blogspot.com/2013/09...revention.html
#8
bored of "Senior Member"
Join Date: Oct 2007
Location: MD / metro DC
Posts: 2,883
Bikes: Cross-Check/Nexus commuter. Several others for various forms of play.
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 642 Post(s)
Liked 593 Times
in
453 Posts
What research did you do that led you to buy and even "love" a specific model without having an answer to this?
+1 to the Sheldon method + accommodations for valuable peripherals.
+1 to the Sheldon method + accommodations for valuable peripherals.
#9
Senior Member
#10
Senior Member
#13
Member
Join Date: Nov 2013
Location: Tennessee
Posts: 42
Bikes: 1976 Nishiki International
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use 2 feet of log chain and a solid steel pad lock . Lol it was free and it works , heavy as all get out but I'd rather have this than nothing at all .
#14
Senior Member
I have two kids living pretty much full time at a major university in major city urban environment. They both have nice vintage road racing bikes with hand built wheels that are their university bikes. The bikes stay outside 24-7 most of the school year. Bike and laptop theft are the #1 and #2 thefts around campus. There are *many* bike carcasses torn apart in various stages of theft visible. Here's what we do:
Permanent locking:
Two Kryptonite Evolution locks - one long shackle ("9"), one short shackle (5"). The short shackle goes through the front wheel and around the down tube. The long shackle goes through the back wheel and around the bike rack Sheldon Brown style. When they go to class or wherever, they leave the small shackle locked around the bike rack and take the long shackle one with them. The locks are keyed alike - you can order them from Kryptonite that way.
Away at class or on an errand:
They use the long shackle lock and lock the bike to the rack Sheldon Brown Style. They don't specifically lock the front wheel.
The bikes are set up with a full set of Pitlocks (this set). These are *very* difficult to get undone without having the key. This locks down the wheels, the seat post (seat has a leash on it) and the fork.
We've basically had two bikes on campus like this for 3 straight years with no problems. Other bikes have been cannibalized and stolen right along side of them. No problems here.
These are really nice bikes too - way better than most of the junk you find around universities but they are old. One is a classic Motobecane racing frame set up with Campy (low end groupo of the day) as an example. We've found that they (obviously) ride a lot better but they hold up and are more reliable as a ride for the kids. So I'm pretty confident in this method.
You don't have to have a pick proof lock, you just have to have one that is tougher than the one next to it. Odds are too that 80% of the people riding bikes in the city don't have the most basic clue about how to lock a bike. It's child's play and 10 seconds for most thieves to get any bike they want due to the crappy locks and locking that most people use. They are not going to waste time on a bike like mine that is going to be a lot more trouble and then they can't do much easily with (like sell quickly) when all it's parts are secure too.
May not be the best method, but it's worked for us for a lot of years in a tough environment.
J.
Permanent locking:
Two Kryptonite Evolution locks - one long shackle ("9"), one short shackle (5"). The short shackle goes through the front wheel and around the down tube. The long shackle goes through the back wheel and around the bike rack Sheldon Brown style. When they go to class or wherever, they leave the small shackle locked around the bike rack and take the long shackle one with them. The locks are keyed alike - you can order them from Kryptonite that way.
Away at class or on an errand:
They use the long shackle lock and lock the bike to the rack Sheldon Brown Style. They don't specifically lock the front wheel.
The bikes are set up with a full set of Pitlocks (this set). These are *very* difficult to get undone without having the key. This locks down the wheels, the seat post (seat has a leash on it) and the fork.
We've basically had two bikes on campus like this for 3 straight years with no problems. Other bikes have been cannibalized and stolen right along side of them. No problems here.
These are really nice bikes too - way better than most of the junk you find around universities but they are old. One is a classic Motobecane racing frame set up with Campy (low end groupo of the day) as an example. We've found that they (obviously) ride a lot better but they hold up and are more reliable as a ride for the kids. So I'm pretty confident in this method.
You don't have to have a pick proof lock, you just have to have one that is tougher than the one next to it. Odds are too that 80% of the people riding bikes in the city don't have the most basic clue about how to lock a bike. It's child's play and 10 seconds for most thieves to get any bike they want due to the crappy locks and locking that most people use. They are not going to waste time on a bike like mine that is going to be a lot more trouble and then they can't do much easily with (like sell quickly) when all it's parts are secure too.
May not be the best method, but it's worked for us for a lot of years in a tough environment.
J.
#15
Registered User
Join Date: Jan 2011
Location: NA
Posts: 4,267
Bikes: NA
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
10 seconds and a cheap hacksaw and the sheldon brown method fails. lock up your frame, not your wheels.
https://www.cyclelicio.us/2011/sheldon-lock-video/
i consider 2 u-locks (and possibly a cable for the wheels) to be the minimum hardware for locking up my bikes for an extended period of time (e.g. more than 5-15 minutes). i also have a throw away shopper i lock up with a single u-lock.
https://www.cyclelicio.us/2011/sheldon-lock-video/
i consider 2 u-locks (and possibly a cable for the wheels) to be the minimum hardware for locking up my bikes for an extended period of time (e.g. more than 5-15 minutes). i also have a throw away shopper i lock up with a single u-lock.
#16
bored of "Senior Member"
Join Date: Oct 2007
Location: MD / metro DC
Posts: 2,883
Bikes: Cross-Check/Nexus commuter. Several others for various forms of play.
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 642 Post(s)
Liked 593 Times
in
453 Posts
It's not a bad idea to lock the frame. But if we're going to open up to destroying the rear wheel, then why not open up to cutting through the frame? Either way, we have the thief carrying away a bike for parts and salvage value, not riding away something that can be sold as is.
I tried cutting through an old taco'd MTB wheel less as a myth buster and more as an experiment to confirm the binding claim. It was far harder than I expected it to be. In my test, I was coming from the inside out. Perhaps that matters?
Anyway, I'm a big fan of the small ulock because it doesn't give the thief lots of angles and play to work with. And it's a nice bike frame space in that video for the hacksaw to get in.
I tried cutting through an old taco'd MTB wheel less as a myth buster and more as an experiment to confirm the binding claim. It was far harder than I expected it to be. In my test, I was coming from the inside out. Perhaps that matters?
Anyway, I'm a big fan of the small ulock because it doesn't give the thief lots of angles and play to work with. And it's a nice bike frame space in that video for the hacksaw to get in.
#17
Senior Member
Join Date: Mar 2006
Location: Montgomery County, Pennsylvania
Posts: 6,489
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 6 Times
in
2 Posts
I have to agree with JohnJ80. Using Pitlocks does lock down the wheels. Using the entire Pitlock system makes it much harder to take parts from your bike. This makes using your small u-lock much safer. Yet, if a determined, knowledgeable thief wants your bike, there is little you can do, but slow down the process.
__________________
A conclusion is the place where you got tired of thinking. - S. Wright
Favorite rides in the stable: Indy Fab CJ Ti - Colnago MXL - S-Works Roubaix - Habanero Team Issue - Jamis Eclipse carbon/831
A conclusion is the place where you got tired of thinking. - S. Wright
Favorite rides in the stable: Indy Fab CJ Ti - Colnago MXL - S-Works Roubaix - Habanero Team Issue - Jamis Eclipse carbon/831
#18
Senior Member
Join Date: Dec 2013
Location: Denver, CO - City Park
Posts: 247
Bikes: Fuji, Ridley, Bianchi, Charge
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
For years I have used a method to deter thieves and move to the next bike. It is crude; it works well on top of being inexpensive. All you need is some heavy duty clear packing tape and some scrap paper. Write your name and phone number in permanent ink on small sheet of paper and stick it on the bike with clear packing tape. Don’t be hesitant in making the label impossible to remove. Placing one on your bike is good, placing them everywhere on your bike is great. I have them on the seat, the rims, seat post, racks, multiple places on the frame and anywhere else you might find the space and need. I have not had a bike stolen since I started doing this.
P.S. in a recent article in Bicycling magazine they referenced this same method for addition safety in bicycle locking.
P.S. in a recent article in Bicycling magazine they referenced this same method for addition safety in bicycle locking.
#19
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,470 Times
in
1,435 Posts
I never thought of that thrlskr. Not sure it would prevent theft. A lot of bike thieves are not rational or smart. They'll steal a bike without thinking of how hard it will be to sell.
It pays to know your area, what kinds of theft are common, etc. In the suburbs, a cable lock often suffices. In some cities, you need the best devices possible, and you should still not leave the bike out for longer than necessary.
It pays to know your area, what kinds of theft are common, etc. In the suburbs, a cable lock often suffices. In some cities, you need the best devices possible, and you should still not leave the bike out for longer than necessary.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#20
Senior Member
It's not a bad idea to lock the frame. But if we're going to open up to destroying the rear wheel, then why not open up to cutting through the frame? Either way, we have the thief carrying away a bike for parts and salvage value, not riding away something that can be sold as is.
I tried cutting through an old taco'd MTB wheel less as a myth buster and more as an experiment to confirm the binding claim. It was far harder than I expected it to be. In my test, I was coming from the inside out. Perhaps that matters?
Anyway, I'm a big fan of the small ulock because it doesn't give the thief lots of angles and play to work with. And it's a nice bike frame space in that video for the hacksaw to get in.
I tried cutting through an old taco'd MTB wheel less as a myth buster and more as an experiment to confirm the binding claim. It was far harder than I expected it to be. In my test, I was coming from the inside out. Perhaps that matters?
Anyway, I'm a big fan of the small ulock because it doesn't give the thief lots of angles and play to work with. And it's a nice bike frame space in that video for the hacksaw to get in.
There are, of course, profoundly stupid bike thieves who would cut a frame or a rear wheel and destroy most of the value of the bike they are stealing but I think there is probably a darwinian component to making sure these guys are the least likely bike thieves. They either starve or get caught.
J.
#21
Senior Member
Join Date: Aug 2005
Location: Las Vegas, NV
Posts: 932
Bikes: '04 LeMond Buenos Aires, '82 Bianchi Nuova Racing, De Rosa SLX, Bridgestone MB-1, Guerciotti TSX, Torpado Aelle, LeMond Tourmalet 853, Bridgestone Radac
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 101 Post(s)
Liked 46 Times
in
36 Posts
There is a link above to Hal Ruzal's YouTube videos. In one of them, he mentions using an old piece of chain to attach the seat to the frame. I've been doing that since I saw it.
#22
Vegan on a bicycle
my only critique of hal's video is that the key-hole is facing the wrong way. if someone else locks their bike to the other side of the post, he might not be able to get his key into the lock.
this is why you DON'T want to use the sheldon brown locking method - https://www.youtube.com/watch?v=H9fLtdZyX-A
these decal kits are actually impressive - https://www.bikeregistry.com/estore/index.php
#24
Senior Member
Cut the one u-lock holding the whole mess to the bike rack and you've got twenty bucks at the recycle yard.
#25
Senior Member
+1
my only critique of hal's video is that the key-hole is facing the wrong way. if someone else locks their bike to the other side of the post, he might not be able to get his key into the lock.
this is why you DON'T want to use the sheldon brown locking method - https://www.youtube.com/watch?v=H9fLtdZyX-A
these decal kits are actually impressive - https://www.bikeregistry.com/estore/index.php
my only critique of hal's video is that the key-hole is facing the wrong way. if someone else locks their bike to the other side of the post, he might not be able to get his key into the lock.
this is why you DON'T want to use the sheldon brown locking method - https://www.youtube.com/watch?v=H9fLtdZyX-A
these decal kits are actually impressive - https://www.bikeregistry.com/estore/index.php
With portable grinding tools, a well equipped thief is not going to have much trouble with any lock these days. But that's a pretty motivated thief and "professional" thief.
Another piece that makes sense is to use two locks - a U lock and a cable lock. That requires two different sets of tools to defeat.
But, as I've said before, we have about 7 bike-years of locking nice bikes up 24/7 at a major urban university with no problems using the Sheldon Brown method and pit locks. Our bikes are just a royal PITA to any thief who wants to rip a bike off. There are much, much easier and more profitable targets. Based on experience, I'm pretty confident in our methodology.
J.