thinking about switching to bullhorns...
10-27-14, 08:10 AM
#1
Senior Member
Thread Starter
thinking about switching to bullhorns...
hi,
I am thinking about switching out my drops for bullhorns...
what brand would you recommend...?
what brake levers do you use...?
how does this setup affect braking...?
I am thinking about switching out my drops for bullhorns...
what brand would you recommend...?
what brake levers do you use...?
how does this setup affect braking...?
10-27-14, 08:20 AM
#2
one life on two wheels
Join Date: Jul 2008
Location: St. Petersburg, FL
Posts: 2,552
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 18 Times
in
15 Posts
bar end brakes are good if you use bullhorns.
You can never go wrong with Nitto brand handlebars if budget allows.
Drops with hoods offer pretty much the same position as bullhorns, which are more for the tri-geek pursuit and fixie crowd. Any particular reason you're interested in trying them?
You can never go wrong with Nitto brand handlebars if budget allows.
Drops with hoods offer pretty much the same position as bullhorns, which are more for the tri-geek pursuit and fixie crowd. Any particular reason you're interested in trying them?
Last edited by cobrabyte; 10-27-14 at 08:41 AM.
10-27-14, 08:44 AM
#5
Banned
i'm thinking of switching to mini-BMX handlebars or bullhorns.
why go bullhorns?
why go bullhorns?
10-27-14, 10:13 AM
#7
The Fat Guy In The Back
Join Date: Sep 2009
Location: Sioux Falls, SD
Posts: 2,532
Bikes: '81 Panasonic Sport, '02 Giant Boulder SE, '08 Felt S32, '10 Diamondback Insight RS, '10 Windsor Clockwork, '15 Kestrel Evoke 3.0, '19 Salsa Mukluk
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 320 Post(s)
Liked 177 Times
in
115 Posts
My TT bike has bullhorns. Of all the different handlebars on my bikes (straight, drops, aero bars and bullhorns) the bullhorns are my least favorite.
For whatever that's worth.
For whatever that's worth.
__________________
Visit me at the Tundra Man Workshop
Visit me at the Tundra Man Workshop
10-27-14, 10:14 AM
#8
one life on two wheels
Join Date: Jul 2008
Location: St. Petersburg, FL
Posts: 2,552
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 18 Times
in
15 Posts
They offer a good "aero tuck" position, but aren't designed for comfort over distance. They do look cool though, if that counts.
10-27-14, 10:14 AM
#9
Banned
10-27-14, 10:25 AM
#10
one life on two wheels
Join Date: Jul 2008
Location: St. Petersburg, FL
Posts: 2,552
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 18 Times
in
15 Posts
Technically, I proposed the "why" question before you did. So there's that. Now we are both at the edge of our seats eagerly awaiting the OP's justification for his choice.
10-27-14, 10:28 AM
#11
Banned
10-27-14, 11:23 AM
#12
bill nyecycles
Join Date: Mar 2013
Location: Houston TX
Posts: 3,328
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 789 Post(s)
Liked 350 Times
in
190 Posts
I have the Origin 8 bullhorns on my commuter bike - bought of Amazon - but you can find them in LBS as well.
To go along with them I have the Cane Creek 200TT brake levers - also bought off Amazon.
It's my first bullhorn setup, and I like it, but I wish they had a little shorter reach (the bars). But I'm short, so, ymmv
the setup doesn't effect braking at all. its not really any different than being on the hoods of drop bars, except you can actually grip the brake levels instead of just hooking with a few fingers.
To go along with them I have the Cane Creek 200TT brake levers - also bought off Amazon.
It's my first bullhorn setup, and I like it, but I wish they had a little shorter reach (the bars). But I'm short, so, ymmv
the setup doesn't effect braking at all. its not really any different than being on the hoods of drop bars, except you can actually grip the brake levels instead of just hooking with a few fingers.
10-27-14, 12:27 PM
#14
Senior Member
Join Date: Feb 2014
Location: SD
Posts: 2,745
Bikes: Handsome Fredward, Trek 1.1
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 481 Post(s)
Liked 131 Times
in
47 Posts
I use Profile Design AirWings. IMO the first decision you need to make is whether you want a flat or drop style bullhorn. I personally like my AirWings because drop is like a happy medium between "on the hoods" and "in the drops" on normal road drops. I use mine with Origin8 bar end lever and they work great.
10-27-14, 12:29 PM
#15
Hogosha Sekai
Join Date: Jun 2011
Location: STS
Posts: 6,669
Bikes: Leader 725, Centurion Turbo, Scwhinn Peloton, Schwinn Premis, GT Tequesta, Bridgestone CB-2,72' Centurion Lemans, 72 Raleigh Competition
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Likes: 0
Liked 21 Times
in
15 Posts
I ride on pursuit bullhorns fairly often on my commute, if my commute were longer than 15 miles each way I suspect I'd be swapping the handlebars for something like drops or north road. I can't imagine picking bullhorns specifically as bars for a dedicated commuter.
10-27-14, 01:08 PM
#16
Banned
10-27-14, 01:43 PM
#17
Senior Member
Join Date: May 2007
Location: Raleigh, NC
Posts: 8,896
Bikes: Waterford RST-22, Bob Jackson World Tour, Ritchey Breakaway Cross, Soma Saga, De Bernardi SL, Specialized Sequoia
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 196 Post(s)
Likes: 0
Liked 6 Times
in
4 Posts
I had bullhorns on one of my commuters for several years. I liked them a lot but eventually switched back to drop bars, mainly because bullhorns make it harder to tuck in on windy days.
My bullhorns were simply some old drop bars that I "flopped and chopped." For brakes, I used Nashbar bar ends that I bought for about $20, and I used down tube shifters.
I say give it a try. For some reason, bullhorns made my bike more fun to ride and I kind of miss them -- except on windy days.
My bullhorns were simply some old drop bars that I "flopped and chopped." For brakes, I used Nashbar bar ends that I bought for about $20, and I used down tube shifters.
I say give it a try. For some reason, bullhorns made my bike more fun to ride and I kind of miss them -- except on windy days.
10-27-14, 01:53 PM
#18
Dead Fly
Join Date: Sep 2014
Location: CA
Posts: 237
Bikes: Bianchi Grizzly, Bianchi Campione D'Italia, Bianchi Ibex
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I had bullhorns on one of my commuters for several years. I liked them a lot but eventually switched back to drop bars, mainly because bullhorns make it harder to tuck in on windy days.
My bullhorns were simply some old drop bars that I "flopped and chopped." For brakes, I used Nashbar bar ends that I bought for about $20, and I used down tube shifters.
I say give it a try. For some reason, bullhorns made my bike more fun to ride and I kind of miss them -- except on windy days.
My bullhorns were simply some old drop bars that I "flopped and chopped." For brakes, I used Nashbar bar ends that I bought for about $20, and I used down tube shifters.
I say give it a try. For some reason, bullhorns made my bike more fun to ride and I kind of miss them -- except on windy days.
10-27-14, 02:00 PM
#19
Senior Member
Thread Starter
bike is geared, just wondering if there is an advantage to bullhorns as I am never in the drops, bullhorns kind of look cool.
my hybrid has bar ends, (which is very similar to bullhorns except wider), which I like a lot.
in order to get a good braking grip, I have to move my hand to the drops and was thinking that I wouldn't have to necessarily move my hand with levers on the bullhorns...
my hybrid has bar ends, (which is very similar to bullhorns except wider), which I like a lot.
in order to get a good braking grip, I have to move my hand to the drops and was thinking that I wouldn't have to necessarily move my hand with levers on the bullhorns...
10-27-14, 02:00 PM
#20
Banned
Sure, but your back can arch, which is quite important from the aero perspective.
10-27-14, 02:07 PM
#21
Senior Member
Thread Starter
[QUOTE=the sci guy;17253512
the setup doesn't effect braking at all. its not really any different than being on the hoods of drop bars, except you can actually grip the brake levels instead of just hooking with a few fingers.[/QUOTE]
yes, that was what I wanted to know... so there is a bit better leverage with bullhorn levers?
also what is the "flat" versus "drop" bullhorns?
the setup doesn't effect braking at all. its not really any different than being on the hoods of drop bars, except you can actually grip the brake levels instead of just hooking with a few fingers.[/QUOTE]
yes, that was what I wanted to know... so there is a bit better leverage with bullhorn levers?
also what is the "flat" versus "drop" bullhorns?
10-27-14, 02:09 PM
#22
Senior Member
Thread Starter
if I decide to go bar end shifters, are they awkward to use? do they conflict with the brake levers?
10-27-14, 02:19 PM
#23
bill nyecycles
Join Date: Mar 2013
Location: Houston TX
Posts: 3,328
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 789 Post(s)
Liked 350 Times
in
190 Posts
"drop" versions drop downward from the center/stem various amounts of degrees, before the turn forward.
flat
drop
If you bar end brakes (like the ones pictured in the 2nd post, and the kind i mentioned, then there is no place for bar end shifters. you can jury rig something, but that's much more complicated. my bike is a single speed, so the need for shifters obviously wasn't there. if you have a geared bike, you can eithe do downtube shifters, or do bar ends and get regular brake levers that go on each side of the stem like flat bar brakes.
10-27-14, 02:23 PM
#24
Senior Member
Thread Starter
I have "flat" bullhorns on mine, which means from the center they go out straight to the sides, curve forward, and then slightly up at the end.
"drop" versions drop downward from the center/stem various amounts of degrees, before the turn forward.
flat
drop
It's one or the other.
If you bar end brakes (like the ones pictured in the 2nd post, and the kind i mentioned, then there is no place for bar end shifters. you can jury rig something, but that's much more complicated. my bike is a single speed, so the need for shifters obviously wasn't there. if you have a geared bike, you can eithe do downtube shifters, or do bar ends and get regular brake levers that go on each side of the stem like flat bar brakes.
"drop" versions drop downward from the center/stem various amounts of degrees, before the turn forward.
flat
drop
It's one or the other.
If you bar end brakes (like the ones pictured in the 2nd post, and the kind i mentioned, then there is no place for bar end shifters. you can jury rig something, but that's much more complicated. my bike is a single speed, so the need for shifters obviously wasn't there. if you have a geared bike, you can eithe do downtube shifters, or do bar ends and get regular brake levers that go on each side of the stem like flat bar brakes.
10-27-14, 02:28 PM
#25
bill nyecycles
Join Date: Mar 2013
Location: Houston TX
Posts: 3,328
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 789 Post(s)
Liked 350 Times
in
190 Posts
here is my bike: https://www.flickr.com/photos/rattleandhum/15024005524/
i don't remember my flickr login and i'm at work so i can't direct link the pic.
here's my blog post of building it: Rebuilding a 1984 Raleigh road bike into a commuter; a learning experience. | the surly biker
i don't remember my flickr login and i'm at work so i can't direct link the pic.
here's my blog post of building it: Rebuilding a 1984 Raleigh road bike into a commuter; a learning experience. | the surly biker