2009 ezip trailz PAS
#1
Newbie
Thread Starter
Join Date: Nov 2015
Location: The Villages, FL
Posts: 1
Bikes: eZip Trailz
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
2009 ezip trailz PAS
Just bought a used bike and is literally is in perfect condition but for 2 things. Looking for insight please...
1) Do I do anything to activate PAS? I believe if the battery is on and the switch is in PAS, all I do is pedal and it will pick up. I have tried the throttle but it doesn't effect it all all. There seems to be no instructions in the manual and I may just be stupid here. Any instructions?Electrically all is well but the pesky PAS is dead. I've went thru wiring and looked at the obvious, the sensor. I don't know how anything could go wrong here just a sensor and magnets. Adjusted several times, no change. Can I take a meter and see anything at the connector as I turn the pedals? Seems should have a pulse or something. Anyway, please help.
2) This one is stupid but the "shocks" are jerky, like sticking. I believe it is just a spring. I've lubed what I can but they are still not right. Any suggestions?
Thanks in advance.
JIM
1) Do I do anything to activate PAS? I believe if the battery is on and the switch is in PAS, all I do is pedal and it will pick up. I have tried the throttle but it doesn't effect it all all. There seems to be no instructions in the manual and I may just be stupid here. Any instructions?Electrically all is well but the pesky PAS is dead. I've went thru wiring and looked at the obvious, the sensor. I don't know how anything could go wrong here just a sensor and magnets. Adjusted several times, no change. Can I take a meter and see anything at the connector as I turn the pedals? Seems should have a pulse or something. Anyway, please help.
2) This one is stupid but the "shocks" are jerky, like sticking. I believe it is just a spring. I've lubed what I can but they are still not right. Any suggestions?
Thanks in advance.
JIM
Thread
Thread Starter
Forum
Replies
Last Post
JakiChan
Electronics, Lighting, & Gadgets
10
08-29-12 10:25 AM