Go Back  Bike Forums > Bike Forums > Electric Bikes
Reload this Page >

What's a good device to check the charge an SLA holds?

Search
Notices
Electric Bikes Here's a place to discuss ebikes, from home grown to high-tech.

What's a good device to check the charge an SLA holds?

Thread Tools
 
Search this Thread
 
Old 06-08-07, 12:01 PM
  #1  
Senior Member
Thread Starter
 
Join Date: Apr 2006
Posts: 141
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
What's a good device to check the charge an SLA holds?

I'm going to start testing the gradual degradation of these SLAs that I just got. However, I need the device that I can hook up to check what the voltage it holds. Don't know where to start or what it's called.

I went to Radio Shack and they were fairly clueless. They said they don't have anything that measures rechargeables like lawmower batteries and the like. I found an altimeter and they said it is for home electric current. Thanks.
bugmenot is offline  
Old 06-14-07, 09:04 PM
  #2  
Amateur Hack
 
Join Date: Oct 2005
Location: Austin
Posts: 135

Bikes: Marin mtb turned tri turned commuter turned singlespeed, Haro Werks 2.0, Specialized Epic Allez carbon main tube built up for triathlons

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
um... you need a voltmeter to check the voltage. you can just get a multimeter (pronounced either MUL-ti-MET-er or mul-TIM-et-er). they read volts, amps, and ohms. You can get a cheap one for around $10. It'll have either a display screen or needle, a function selection knob, and red and black probes.

I'm rather disappointed by your Radio Shack. That store is apparently run by idiots. (btw, an altimeter is used to measure altitude).
_dhan_ is offline  
Old 06-14-07, 09:31 PM
  #3  
Senior Member
 
Join Date: Sep 2005
Posts: 4,697
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 10 Times in 9 Posts
Radio Shack used to be great, but now sadly they do little more than sell cel phones and cheep remote control toys.

bugmeot, yes you need a multimeter. Radio Shack may have one, but a better bet would be an home supply store.
Allen is offline  
Old 06-22-07, 02:18 AM
  #4  
Junior Member
 
Join Date: Jun 2007
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I've always just said it multi-meter. But agreed, radioshack is pretty much worthless nowadays for anything hobbyist related, and sadly nothing has filled that empty space. Maybe people just don't "tinker" much anymore? Or perhaps the internet has make $3 packs of resistors hard to sell?
RebelWithACause is offline  
Old 06-22-07, 02:45 PM
  #5  
ǝıd ǝʌol ʎllɐǝɹ I
 
JeanCoutu's Avatar
 
Join Date: Apr 2007
Posts: 518
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
The above advice is good, I'll add that the ultimate for power assist bicycles is probably the device formerly known as DrainBrain:
https://ebikes.ca/drainbrain.shtml

Otherwise the watt's up is a decent power usage meter that's a lot cheaper then the device formerly known as DrainBrain, except it has no features specific to vehicular use:
https://www.all-battery.com/index.asp...OD&ProdID=1514


After a while you get to know your battery's capacity and since these meters show how many Ah you've used, it gives you a good idea how much is left. They also show instantaneous power used, so you can see when you're dumping power with little return. Example: On my first ebike, going uphill full throttle used a given amount of power, but letting go the throttle just a crack would cut the power use by about a third with very little speed difference.
JeanCoutu is offline  
Old 06-25-07, 05:57 AM
  #6  
Junior Member
 
Join Date: May 2007
Location: Arkansas
Posts: 6

Bikes: Mongoose Comort

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Looks like the "DrainBrain" is brain dead! Maybe something in the future.
Duffy2 is offline  
Old 06-25-07, 06:23 PM
  #7  
Senior Member
Thread Starter
 
Join Date: Apr 2006
Posts: 141
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Went to lowes and picked up a multimeter. Problem is, I don't know how to use it. From reading several websites, I can hook it up to the + and -, and it will tell me the voltage i.e. my 12V battery eventually settles on 12.0002 or something like that.

Great! All I had to do was read the label if I need info like that.

I want to figure out what % of charge battery holds vs. 100% new battery usage. Any tips or website you can recommend?

My multimeter looks something like this:
https://www.wiredco.com/catalog/imag...R%20YELLOW.jpg

Only it doesnt have the A-.., temp. It does have a red V with a tilde.
bugmenot is offline  
Old 06-25-07, 06:35 PM
  #8  
Senior Member
 
Join Date: Jun 2007
Location: Vancouver, BC
Posts: 273

Bikes: Rocky Mountain electric bike

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Duffy2
Looks like the "DrainBrain" is brain dead! Maybe something in the future.
The DrainBrain is definitely not dead. Right now I'm testing what is hopefully the last code revision, and there are plenty of brand new units awaiting programming and a new home. A few 'undocumented features' were discovered during my testing of the new unit, and unfortunately updating the firmware for a customer isn't as easy as clicking Windows Update, so it better be perfect before shipping.
Lowell_ is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.