Slightly used Crystalyte 400
02-05-09, 04:21 PM
#1
Senior Member
Thread Starter
Join Date: Jun 2005
Location: London, Ontario
Posts: 518
Bikes: 2 Xootr Swifts, Dahon Curve, Oxford Winter Beater.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Slightly used Crystalyte 400
*EDIT FEB 15 2009 @ 14:28* MOTOR IS SOLD
Wasn't sure if I should have put this here or in the buy/sell forum. I figure there are more enthusiasts here.
Would anyone be interested in the following:
Crystalyte 400 series front hub motor
36-48V 40 amp controller
36V 8Ah NiCad (6kg/13.2lbs) + charger
Thumb throttle
The hub motor is on a 20" rim. I could send the whole wheel or just the hub. I would prefer to keep the rim (needs truing as is).
The battery has been charged but then not used for quite some time (half year). I went through several cycles and now it is quite good at retaining charge. The total number of cycles on the battery is less than 20.
Please forward an offer if you're interested.
Wasn't sure if I should have put this here or in the buy/sell forum. I figure there are more enthusiasts here.
Would anyone be interested in the following:
Crystalyte 400 series front hub motor
36-48V 40 amp controller
36V 8Ah NiCad (6kg/13.2lbs) + charger
Thumb throttle
The hub motor is on a 20" rim. I could send the whole wheel or just the hub. I would prefer to keep the rim (needs truing as is).
The battery has been charged but then not used for quite some time (half year). I went through several cycles and now it is quite good at retaining charge. The total number of cycles on the battery is less than 20.
Please forward an offer if you're interested.
Last edited by jakub.ner; 02-15-09 at 01:50 PM.
02-05-09, 06:56 PM
#2
Senior Member
Thread Starter
Join Date: Jun 2005
Location: London, Ontario
Posts: 518
Bikes: 2 Xootr Swifts, Dahon Curve, Oxford Winter Beater.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
*EDITED*
Forgot to mention the charger.
Forgot to mention the charger.
02-07-09, 11:32 AM
#3
Senior Member
Join Date: Jan 2009
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I may be interested. I have been shopping around for kits to place on my dads old bike. Could you by chance message/email me with prices for each and or all of them together? The only problem is that I live in Nevada so I am not sure as to shipping costs. Thanks.
02-09-09, 07:57 PM
#5
Senior Member
Thread Starter
Join Date: Jun 2005
Location: London, Ontario
Posts: 518
Bikes: 2 Xootr Swifts, Dahon Curve, Oxford Winter Beater.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I sent a PM.
I really don't know what to ask for the kit.
I'd rather not send it with the 20" rim as I could use the rim. Hope that's OK. Either way is fine really.
The reason I'm looking to sell is that my bicycle is a folding bicycle. I need to take off the front wheel in order to properly fold the bike. Having to deal with the motor in this manner has proven unwieldy. I originally thought I won't want to fold the bike, but have since changed my mind.
I really don't know what to ask for the kit.
I'd rather not send it with the 20" rim as I could use the rim. Hope that's OK. Either way is fine really.
The reason I'm looking to sell is that my bicycle is a folding bicycle. I need to take off the front wheel in order to properly fold the bike. Having to deal with the motor in this manner has proven unwieldy. I originally thought I won't want to fold the bike, but have since changed my mind.
02-14-09, 11:25 PM
#6
Junior Member
Join Date: Feb 2009
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
hi im interested w/ your motor kit
hi im interested w/ your motor kit, do you still have more there or anyone of your friends who likes to sell there motor kit, im looking for 26", 500w brushless motor "rear much better" battery 36v 10AH or 48v , w/ charger and the controller im in surrrey b.c., tnx
02-15-09, 09:27 AM
#7
Senior Member
Join Date: Oct 2008
Location: Moncton, NB, Canada
Posts: 113
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Quote "Crystalyte 400 series front hub motor"
Can you check on the motor to see if there is indication of what 400 series it is ?.
In a 20" it's likely a 406 or a 405 but would be good to know.
Can you check on the motor to see if there is indication of what 400 series it is ?.
In a 20" it's likely a 406 or a 405 but would be good to know.
02-15-09, 01:47 PM
#8
Senior Member
Thread Starter
Join Date: Jun 2005
Location: London, Ontario
Posts: 518
Bikes: 2 Xootr Swifts, Dahon Curve, Oxford Winter Beater.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hello there.
Sorry for not responding earlier.
The motor is a 406, but I'm already sending it to someone. Just packed it up and logged in to check the address.
Once again, sorry for not saying anything in this thread earlier.
Sorry for not responding earlier.
The motor is a 406, but I'm already sending it to someone. Just packed it up and logged in to check the address.
Once again, sorry for not saying anything in this thread earlier.
