Advertise on

User Tag List

Results 1 to 1 of 1
  1. #1
    Junior Member D0gSoldi3r's Avatar
    Join Date
    Feb 2014
    0 Post(s)
    0 Thread(s)

    will this work on my ebike

    i just bought a Turnigy Accucel 6 50w 6A Charger
    • Input Voltage: 11~17v
    • Circuit power: Max Charge: 50W / Max Discharge: 5W
    • Charge Current Range: .1~6.0A
    • Ni-MH/NiCd cells: 1~15
    • Li-ion/Poly cells: 1~6
    • Pb battery voltage: 2~20v
    • Weight: 355g

    but i really want to buy 3 of these from hobbyking
    • Minimum Capacity: 5000mAh
    • Configuration: 6S1P / 22.2v / 6Cell
    • Constant Discharge: 40C
    • Peak Discharge (10sec): 50C
    • Pack Weight: 836g
    • Pack Size: 150 x 49 x 52mm
    • Charge Plug: JST-XH
    • Discharge plug: 5.5mm Bullet-connector

    But the charger says it's max pb battery voltage is 20v and the batteries are 24v so i'm in a bind as i've already purchased the charger from ebay, will i not be able to use these batteries now and have to opt for a 4000mah at 14.8V

    Oh, this is the hub motor i purchased this week any good or did i buy crap, all i could afford anyway so couldn't have changed it for a better one if i wanted...
    36/48V 250/500/800/1000W Electric Bicycle E-Bike 26" Front Rear Wheel Motor Kit | eBay

    It's the 48v 1000w rear wheel version i got, how much more voltage do you think this would handle without melting it, hasn't arrived yet so i have no idea what the quality of my controller will be

    i'm scared of fires as i had a house fire once so i plucked up enough courage to buy these, believe me the 1st items on my list were indeed lipo fire resistant bag/pouches...
    Last edited by D0gSoldi3r; 06-30-14 at 07:11 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts