Advertise on Bikeforums.net



User Tag List

Page 47 of 75 FirstFirst ... 37454647484957 ... LastLast
Results 1,151 to 1,175 of 1865

Thread: Total Geekiness

  1. #1151
    Senior Member
    Join Date
    Apr 2006
    Posts
    114
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    No problem about the questions. You'll want an inline fuse holder and a fuse to put in it. Both are available at radioshack. I don't have a fuse because I'm using a 10ah car jumper pack, so it has all that built in. You'll need a fuse bigger than the amount of amps you'll be drawing. Let's say you have 20w and a 35w, thats 55w. 55w/12v = 4.58amps. You could go with a 5amp fuse, but it'd be cutting it close. I'd just use a 10amp.
    '05 Giant Rincon

  2. #1152
    I am not a car Map tester's Avatar
    Join Date
    May 2004
    Location
    Decatur, GA
    My Bikes
    '81 Takara Sport Touring, Giant Revel 1, Surly Ogre
    Posts
    748
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I use a 10 amp ATC automobile-type blade fuse. You can get the holder for a few dollars at most auto parts stores. More reliable that the in-line glass-tube type fuses.

    "Bad facts make bad laws." FZ

  3. #1153
    Oh The Huge Manatee Lithuania's Avatar
    Join Date
    Feb 2006
    Location
    mabra
    Posts
    4,528
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    thanks guys. I cant wait to go out and get a switch and parts for another light. I cant believe how excited I am to see if I can get a switch to work. I cant believe ive made all this so far.

  4. #1154
    Senior Member
    Join Date
    Apr 2006
    Posts
    114
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Actually, on a bike a blade fuse is probably a better idea. They are way more durable.
    '05 Giant Rincon

  5. #1155
    Muscle bike design spec robtown's Avatar
    Join Date
    Oct 2004
    Location
    Sterling VA
    My Bikes
    98 Giant CFR-TEAM, 00 Lemond, 08 Kestrel Evoke, 96 Colnago Master Olympic, 01 Colnago Ovalmaster, Raleigh Gran Sport, 03 Fuji World, 86 Paramount, 90 Miyata CF, 09 Ritchey Breakaway CX, Bianchi Trofeo, 12 HyperLite
    Posts
    3,649
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by randall t
    Is anybody still using the Malibu lights that started this whole thread? How are they working out?
    I bought a couple Malibu 25 watt lights. I never found a good means to mount one and it threw an uneven pattern. Looking at it from 60' away it wasn't as obnoxious as the MR16s. I had offered to give them away for postage earlier with no takers - don't know what I did with them now.

  6. #1156
    Senior_Member2 diff_lock2's Avatar
    Join Date
    Apr 2006
    Location
    Finlando NOT: Orlando, Fl
    My Bikes
    Beater + Nishiki Bigfoot X-29
    Posts
    1,694
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by NightFreeRider
    Hej :-)



    Here is an update on my light system.



    As I coudnt find any MR16's with a narrow beam (yeah,I live in the ****y country,I know..)
    I converted to dual MR11 lamps.


    Flood beam is 20W and spot is 35W 8 degree spot.

    The battery is still a small 1,6Ah NiCd donated by a cordless drill,
    but I have a original 4 hour charger ..


    With smaller lamps,it is more of a neat setup,
    and it almost looks as a one from a manufacturer :-)
    The battery is placed inside a small Cannondale underseat bag.


    Will be adding a Xenon strobe at the back (as soon as I can find one in this godforsaken land..)
    and a bigger battery.
    I just saw a very cheep 3800mAh Sony NiMH AA's last week,so that might do the trick.

    Riding with this lights makes me grin









    mo pictures at: http://iralic.fotopic.net/c762805.html


    `
    `
    `
    `

    Cheers!

    -------------------
    Igor

    "We cyclists,we don't have back wind,we either have a head wind,or 'we feel exceptionally fit today'.."





    ~ ~ o
    ##/->
    (#)\ (#)


    Pictures @ http://iralic.fotopic.net
    HomePage @ www.geocities.com/rrralic
    I realy wana know more about how the bubls/lights are mounted in the housing, and how did you make that houseing, also how did you mount the housing, and do you mind for a wiring scymatic?

    thanks

  7. #1157
    Senior Member
    Join Date
    Apr 2006
    Posts
    114
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I would also like to see how you did that. Also, did you use ebay sockets for your bulbs? I've seen them sell for $3 or so and I think thats a good deal considering everywhere else I see them they are upwards of $8.
    '05 Giant Rincon

  8. #1158
    You gotta be who you be
    Join Date
    Dec 2005
    Location
    Conroe, TX
    My Bikes
    Cannondale Q6
    Posts
    69
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Other than lights

    A couple days ago, I was riding and almost home, and reached down into a pocket on my front panier for the garage door opener.. I missed, and got slower, and missed, and got slower, finally managed to tip over and land on my butt, laughing like an idiot at how stupid that must have looked. I don't think anyone saw though...

    So yesterday, I couldn't resist. I scavenged a reset (push on, release off) button from an old computer and an unused blinky handlebar mount. Opening up the garage door remote, I soldered a two conductor wire to the back of the circuit board, tied it into the switch, a few pieces of heat shrink tubing, a few small cable ties, and now my bike has a permanently mounted pushbutton garage door remote. Mounted the switch itself on the blinky mount with several layers of epoxy to give it support.

    It sits right next to the GPS cradle and above the pair of 1W LED headlamps.

    If I rode much at night on dark roads, I'd probably build the MR16 with 3W led bulbs. As it is, I think its better to have the pair of 1w mountables on hand with alkaline AA's, as opposed to having to be concerned with keeping a rechargeable topped off.

  9. #1159
    Senior Member
    Join Date
    Apr 2006
    Posts
    114
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by rwwff
    As it is, I think its better to have the pair of 1w mountables on hand with alkaline AA's, as opposed to having to be concerned with keeping a rechargeable topped off.
    Isn't that expensive though?
    '05 Giant Rincon

  10. #1160
    Senior_Member2 diff_lock2's Avatar
    Join Date
    Apr 2006
    Location
    Finlando NOT: Orlando, Fl
    My Bikes
    Beater + Nishiki Bigfoot X-29
    Posts
    1,694
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    whats going to provide more light (with witch combo will i see better at night) 1x20w or 2x10w (halogen GU lights) and if i run a H3 55w 12v fog lamp for lke 1 min how much is it going to afect a 5Ah batt? (12v)
    also any idea about how 1 min of 12v motorbike horn use is going to affect over all burn time?

  11. #1161
    You gotta be who you be
    Join Date
    Dec 2005
    Location
    Conroe, TX
    My Bikes
    Cannondale Q6
    Posts
    69
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Joecool85
    Isn't that expensive though?
    I dunno, each light was about $30. [PlanetBike 1W LED spot ] I think of them as mutli purpose. At times where the power is out, they can light a room for many hours on a single set of AA's; they're handy enough to make pretty good camping flashlights, and they provide the just-in-case lighting I feel I need on the bike. Now perhaps Rita in '05 warped my fragile little mind, but we were without power for over three days, and at the time I only had a single Luxeon LED flashlight. It really worked well, and I would have been very happy to have several, so now I have a total of 4 of these 1W LED lamps.

    Also, these little spots do run fine on rechargeable NiMH's, so if I were using them daily, it wouldn't be hard to swap in fresh batteries each morning.

    I think I could probably do the 3W LED MR16 for $30 not including the battery, (I have quite a few SLA's); but you loose a bit of the "handiness" in the process. On the other hand, one could make an MR16 "lamp base" that would hold a 12V 12ah SLA, for the incremental cost of the MR16 connector, some wood, a switch, and the wiring, so maybe that wouldn't be so bad. Its the bulb that carry's most of the cost

  12. #1162
    Oh The Huge Manatee Lithuania's Avatar
    Join Date
    Feb 2006
    Location
    mabra
    Posts
    4,528
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    here are some more photos of my current setup.







    This is pretty pedestrian to most of you guys but for me its a big deal. Right now the two headlights both run of different sources. One is a 20w spot the other a 20w flood. One runs off the 3.3Ah SLA the other runs off an 8 pack of regular double As and is mainly a just in case battery.

    The new light I made I added a switch. Boy am I proud of myself for doing that.

    The back blinkies are just regular blinkies for now until i know more about what I am doing.

    next i am going to look into fuses and a switch box.

  13. #1163
    Junior Member
    Join Date
    Mar 2006
    Location
    Maine
    Posts
    18
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Well, I've read every post in this thread, plus some other material I found across the web, and I've ordered all the parts for my custom system. Here's a list of what's on the way or here already:

    2 Optronics QH-12IT Fog Lamps from eBay (take MR-16 bulbs) ($8)
    2 20 Watt MR-16 bulbs (1 36 degree, 1 15 degree), $13 from Home Depot
    LightBrain Dual Controller from Trail Head Lights ($25)
    2 Waterproof Switches from Trail Head Lights ($4 each)
    Stop-Turn-Tail Red Led Tailight from Doran Manufacturing ($9.49 + $7.99 shipping)
    Amber Velleman Strobe from All Electronics (still $8.99)
    500 ma 12 volt lead acid battery charger from All Electronics ($12.75)
    Various connectors, fuse holder from All Electronics (~$10)
    LED flasher relay from eBay ($6)
    Rubber-coated P-clamps from local hardware store ($2.50)
    Food storage container with silicone seal from K-Mart ($3)

    I already had a 5 AH SLA battery from a dead UPS (electronics problems, not battery problems), wire, and some suitable switches. I ordered the LightBrain to give me the ability to easily dim the lights and have automatic fallover from one bulb to the other if one should burn out. I'm planning to wire the flasher relay to the tail light lead on the S-T-T light to give me a monster blinkie. The stop lead will be wired up to a brake switch to give me a usable braking signal. Other possible additions will be a car horn (already have) and turn signals, but these might not be included until Rev. 2.0. I'll be sure to post pics as the project evolves.

    Ken

  14. #1164
    kipuka explorer bkrownd's Avatar
    Join Date
    Apr 2004
    Location
    Hilo Town, East Hawai'i
    My Bikes
    1994 Trek 820, 2004 Fuji Absolute, 2005 Jamis Nova, 1977 Schwinn Scrambler 36/36
    Posts
    3,275
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by rwwff
    As it is, I think its better to have the pair of 1w mountables on hand with alkaline AA's, as opposed to having to be concerned with keeping a rechargeable topped off.
    How many hours a day do you use them? I only recharge my EL-500 batteries after about 10-15 commutes.
    --
    -=- '05 Jamis Nova -=- '04 Fuji Absolute -=- '94 Trek 820 -=- '77 Schwinn Scrambler 36/36 -=-
    Friends don't let friends use brifters.

  15. #1165
    Senior_Member2 diff_lock2's Avatar
    Join Date
    Apr 2006
    Location
    Finlando NOT: Orlando, Fl
    My Bikes
    Beater + Nishiki Bigfoot X-29
    Posts
    1,694
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    How many hours a day do you use them? I only recharge my EL-500 batteries after about 10-15 commutes.
    What setup are you runing?

  16. #1166
    Oh The Huge Manatee Lithuania's Avatar
    Join Date
    Feb 2006
    Location
    mabra
    Posts
    4,528
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Now that I got this working I want to upgrade to nihm batteries and a higher aH. Has anyone used one switch to power two lights? Like One setting for one light, another for the other, then a 3rd position for both lights at once and finally a 4th position for off? Would it just be easier to use 2 switches?

    For you guys that have multiple headlights and taillights run off the same battery, how many switches do you have?

    Does anyone have a voltage regulator?

    Can anyone recommend any good books for someone starting out with this type of thing?

  17. #1167
    kipuka explorer bkrownd's Avatar
    Join Date
    Apr 2004
    Location
    Hilo Town, East Hawai'i
    My Bikes
    1994 Trek 820, 2004 Fuji Absolute, 2005 Jamis Nova, 1977 Schwinn Scrambler 36/36
    Posts
    3,275
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by diff_lock2
    What setup are you runing?
    I have one EL-500 headlight, running on 2250 mAH NIMHs. I'm building a 4-Luxeon homebrew headlight to go with it...slowly.
    Last edited by bkrownd; 05-05-06 at 03:24 AM.
    --
    -=- '05 Jamis Nova -=- '04 Fuji Absolute -=- '94 Trek 820 -=- '77 Schwinn Scrambler 36/36 -=-
    Friends don't let friends use brifters.

  18. #1168
    Ride the Road Daily Commute's Avatar
    Join Date
    Jan 2004
    Location
    Columbus, Ohio
    My Bikes
    Surly Cross-Check; hard tail MTB
    Posts
    4,059
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Switch question: I have a great system-except for the switch. It's a Trailtech 13 W HID and an 11.1V Li-Ion battery. The problem is that the Trail Tech switch that I bought won't switch the light off. It has two position. When it's on, the low battery light comes on even when the battery is fully charges. When it's off, the low battery light goes off, but the HID stays on.

    I sent it back to Trail Tech and they said it works for them.

    Any suggestions? Thanks.

  19. #1169
    Muscle bike design spec robtown's Avatar
    Join Date
    Oct 2004
    Location
    Sterling VA
    My Bikes
    98 Giant CFR-TEAM, 00 Lemond, 08 Kestrel Evoke, 96 Colnago Master Olympic, 01 Colnago Ovalmaster, Raleigh Gran Sport, 03 Fuji World, 86 Paramount, 90 Miyata CF, 09 Ritchey Breakaway CX, Bianchi Trofeo, 12 HyperLite
    Posts
    3,649
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by riskus
    Now that I got this working I want to upgrade to nihm batteries and a higher aH. Has anyone used one switch to power two lights? Like One setting for one light, another for the other, then a 3rd position for both lights at once and finally a 4th position for off? Would it just be easier to use 2 switches?

    For you guys that have multiple headlights and taillights run off the same battery, how many switches do you have?

    Does anyone have a voltage regulator?

    Can anyone recommend any good books for someone starting out with this type of thing?
    I use the Lightbrain controller as my switch. The Lightbrain regulates the input voltage to 13.2v and switches through 5 settings from 34% on one light to 100% on both. I now either use a 6150mah Li-ion 18v battery (I haven't tested it for longer than 1hr) or a pair of 8.4v NiMh 3300mah batteries in series.
    In the picture(s) you can see the optronics housings hanging off my aerobars. The red square switch is the momentary on. The little canister is a 35mm film case sealed with hot glue and electrical tape. I don't use a switch but connect the lightbrain to the battery. I have extra Optronics housings from an Ebay purchase so I try various halogen bulbs from 20w to 35w, and 8 - 24 degrees. A few are various color temperature Solux bulbs.
    Attached Images Attached Images

  20. #1170
    Bring That Beat Back Old Dirt Hill's Avatar
    Join Date
    Oct 2005
    Location
    I lost my legs
    Posts
    939
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    So here's some crappy pictures of my ride with my custom light build. I used the Malibu lights from Home Depot along with a small outdoor conduit box for the switch mount. The lights are a 20w spot and a 20w flood, switched independantly. I have them powered by a 4500mAh 13.2v NiMH battery, which powers everything nicely.

    I'm happy with how everything turned out, and I used this setup all winter. Still, I am ready for a rebuild so that I can make things look a little cleaner and a little better waterproofing would be nice.
    Attached Images Attached Images

  21. #1171
    Unique Vintage Steel cuda2k's Avatar
    Join Date
    May 2005
    Location
    Allen, TX
    My Bikes
    Kirk Frameworks JKS-C, Serotta Nova, Gazelle AB-Frame, Fuji Team Issue, Schwinn Crosscut, All-City Space Horse
    Posts
    11,486
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Hello all, after reading many of the pages of this thread (and taking up much time I should have been working) I'm starting to narrow down my selection of parts for my own lighting system. Posting this up for feedback for tweaking and refining the final product before I spend any money.

    1) Housings: Optronics MR16 driving lights - reason is fairly obvious. Highly recommended and easy to aquire.

    2) Bulbs: Philips Energy Advantage bulbs. Point of debate here
    a) 2x 20W. 1x 36*flood, 1x 8*spot - probably plenty of light, but would likely need to run both a fair bit of time to get best results.
    b) 1x 30W NarrowFlood 24*, 1x 20W 36*flood, or maybe the spot. - run the 30W primary with the 20W for times when I either need more light, or in evening settings when some light is needed but not primary, or when longer battery life needed.
    c) 1x 35W NarrowFlood 24*, 1x 20W 36*flood, or maybe the spot. - run the 30W primary with the 20W for times when I either need more light, or in evening settings when some light is needed but not primary, or when longer battery life needed.
    d) 2x 30W, one Narrow flood 24*, spot or flood (input welcome).

    3) For one of these setups (Max Wattage = 60W for short periods, Avg Wattage ~35W) would I be good to use the following battery:
    13.2V 5000mAh NiMH http://batteryspace.com/index.asp?Pa...OD&ProdID=2193
    -OR-
    12V 4200mAh be enough. http://batteryspace.com/index.asp?Pa...OD&ProdID=2215

    Commutes will be short (35-45mins max travel time), but may want to include some night rides of up to an hour or so. I know the general math behind Wattage/Amps/Battery life time, but wanted some feedback all the same. I'm leaning to the bigger battery. While it is $15 more, and will reduce my bulb life, at a max of 2 hours a day, even if I get only 20% of the advertised life out of the bulb I'll have over a year's worth of commuting life on them.
    [CENTER][URL="http://VeloBase.com"][IMG]http://velobase.com/App_Themes/VeloBase2_blue/Images/VeloBase2TitleCampagnolo.jpg[/IMG][/URL][/CENTER]
    [CENTER][URL="http://JonPFischer.com"][COLOR="#006400"]Fischer Photography[/COLOR][/URL] - [URL="http://www.bikeforums.net/showthread.php/785462-My-new-modern-quot-Classic-quot-Kirk-JKS-Classic-Terraplane"][COLOR="#8b0000"]Kirk Frameworks JKS-Classic Build Thread[/COLOR][/URL][/CENTER]

  22. #1172
    Seņior Member ItsJustMe's Avatar
    Join Date
    Sep 2005
    Location
    Michigan
    My Bikes
    Windsor Fens, Giant Seek 0 (2014, Alfine 8 + discs)
    Posts
    11,728
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)
    Batteryspace Update
    Sorry if this info has already been posted, I haven't been keeping up on this thread.

    Batteryspace.com has some new stuff since last time I looked. They now have full ready-to-go LiIon/charger/13W HID setups for about $220. I built my own HID from their parts but this would be tempting if I were doing it again.

    They now have the 30W HID in stock for $160. That would certainly be a hell of a blowtorch! They say 100W halogen equivalent.

    They also have a few mounting brackets and odds and ends that might be useful to folks on this thread.

    I notice that they are now indicating to use ONLY 12V & 13.2V NiMH or 11.1V Li-Ion battery packs with their bare HID bulbs. I had a disagreement with them after I used one of their 14.4v packs (which they claimed was "perfect for HID") and it fried the HID in 3 hours. Glad they changed their tune on that.
    Work: the 8 hours that separates bike rides.

  23. #1173
    Senior Member ken cummings's Avatar
    Join Date
    Dec 2005
    Location
    northern California
    My Bikes
    Bruce Gordon BLT, Cannondale parts bike, Ecodyne recumbent trike, Counterpoint Opus 2, miyata 1000
    Posts
    5,605
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Cuda2K, I use a 50 watt very narrow spot at 12 degrees and enough unreflected light goes out the front of the bulb to light up a two lane road and the shoulders as well. A 24 degrees 'flood' would seem to waste light in the trees and fields along side the road and not put light on and further down the road. As MR16 bulbs are inexpensive please try the narrowest spot you can find at least once. The only bulb I have ever had too tight a beam was a PAR36 shielded filament spotlight. As far as the batteries go, I vote for the 13.2 V battery. Wiring losses and connection resistances will drop the voltage at the bulb to 12 V or a harmless bit of overvoltage. Go with a 12 v battery and it might be underpowered. Given adequate money I would like a 18 to 24 V battery and a variable voltage regulator.
    This space open

  24. #1174
    It's true, man.
    Join Date
    Aug 2005
    Location
    North Texas
    My Bikes
    Cannondale T1000, Inbred SS 29er, Supercaliber 29er, Crescent Mark XX, Burley Rumba Tandem
    Posts
    2,727
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Forgive me if this has already been posted here:

    http://www.instructables.com/ex/i/A9...E506/?ALLSTEPS

  25. #1175
    original bike rider nycballer0591's Avatar
    Join Date
    Jun 2006
    Location
    new york
    My Bikes
    huffy tempas 26" MTB
    Posts
    88
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I Have A Question is there a way to make left and right turn signals for bikes ?
    James WAS Here !!!

Page 47 of 75 FirstFirst ... 37454647484957 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •