Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Electronics, Lighting, & Gadgets (https://www.bikeforums.net/electronics-lighting-gadgets/)
-   -   upgrade from Lumotec Plus (https://www.bikeforums.net/electronics-lighting-gadgets/529797-upgrade-lumotec-plus.html)

SingeDebile 04-10-09 07:11 PM

upgrade from Lumotec Plus
 
A friend of my roomate accidentally smashed my headlight so I am once again in the market for one (he offered to replace it). I dont have the money for one of the new ultra LED ones but I would be willing to upgrade a bit if the difference will be noticeable. The Halogen Lumotec was the first real headlight ive ever used and I was very impressed with it, though I have yet to do any fast rides at night or extended tours with it. Of note is the fact its paired to a Dymotec 6 bottle dynamo. So any ideas or suggestions in the $40 plus market would be really helpful, otherwise I will probably just stick replace it.

ChiapasFixed 04-10-09 10:26 PM

the Dlumotec LED maybe?

Michel Gagnon 04-12-09 08:46 PM

The Lumotec Fly (either without or with standlight) sells for 35 to 50 $ and has approximately the same brightness as your old halogen light. But it won't get dimmer over time and you won't burn bulbs because it uses LEDs. I think it is very good light for being seen, but not the best to ride in total darkness.

The Lumotec IQ Fly (note the IQ) may come with or without standlight and sells for about 100 $. It is 3 times brighter than the Fly. If you ride in poorly lit areas, you will truly appreciate the difference.

SingeDebile 04-15-09 05:34 PM

yeah i think that was the idea, I want to be able to use this on a country road where there is no other light.. Ill look into the lumotec IQFly

calina 04-15-09 07:03 PM

If you have a soldering iron and know how to use it, you could make a really good light for about $40/$50.00.
Here's a good reference : http://www.pilom.com/BicycleElectron...moCircuits.htm
Circuit number 2 with 3 XRE Cree LEDs would provide more light than what you ever hoped for and would rival with lights costing in the hundreds of dollars..

SingeDebile 04-17-09 04:04 PM


Originally Posted by calina (Post 8739156)
If you have a soldering iron and know how to use it, you could make a really good light for about $40/$50.00.
Here's a good reference : http://www.pilom.com/BicycleElectron...moCircuits.htm
Circuit number 2 with 3 XRE Cree LEDs would provide more light than what you ever hoped for and would rival with lights costing in the hundreds of dollars..

what LED would you recommend if I could only use one (I would be retro-fitting an old headlight), would one of the ones with a pre-mounted lens like this http://www.theledlight.com/LuxeonLEDs.html at 5 watts work?


All times are GMT -6. The time now is 03:14 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.