Garmin Edge 500 Firmware version 2.40 released
#1
Senior Member
Thread Starter
Join Date: May 2010
Location: Long Island, NY
Posts: 1,637
Bikes: '85 Rossin Super Record, '88 Specialized Sequoia, '10 Raleigh Cadent FT2, '10 Specialized Roubaix Elite
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Garmin Edge 500 Firmware version 2.40 released
A firmware update (Version 2.40) is now available through Garmin Web Updater for the Edge 500.
This version is available through Web Updater. Note that when I connected through Garmin Connect, it still reported that I had version 2.29 and the newest version was 2.3. However when you run Web Updater, it will find version 2.4.
The changes are as follows:
Changes from version 2.30 to version 2.40:
• Fixed issue that was causing unit freezes on manual and auto laps
• Fixed issue that was causing missing activities after reset
• Fixed issue that was causing missing laps and bad timestamps in activities
• Fixed issue causing large elevation readings to be recorded in activities that created errors when uploaded to Garmin Connect
• Improved smart recording
• Added a Statute UK setting that sets distance to miles, speed to mph, elevation to meters and temperature to Celsius
• Fixed issues related to editing workouts
• Fixed issues with 'Repeat Until' in workouts
• Implemented a prompt if the timer is not reset after 4 hours to remind the user to reset
• Corrections to ANT wheel speed, size and auto calibration with PT hubs
• Course Map Zooming -> The device now pops up a page on the course map with the light key like is done for the course scaling. This page will allow the user to set the zooming to auto or to some set zoom level.
• Updated the Start Notice feature to alert the user any time the timer is not running if set to Repeat
• Fixed issue causing elapsed time to not be calculated correctly
• Delete Garmin software update files after updates are complete
• Updated translations
This version is available through Web Updater. Note that when I connected through Garmin Connect, it still reported that I had version 2.29 and the newest version was 2.3. However when you run Web Updater, it will find version 2.4.
The changes are as follows:
Changes from version 2.30 to version 2.40:
• Fixed issue that was causing unit freezes on manual and auto laps
• Fixed issue that was causing missing activities after reset
• Fixed issue that was causing missing laps and bad timestamps in activities
• Fixed issue causing large elevation readings to be recorded in activities that created errors when uploaded to Garmin Connect
• Improved smart recording
• Added a Statute UK setting that sets distance to miles, speed to mph, elevation to meters and temperature to Celsius
• Fixed issues related to editing workouts
• Fixed issues with 'Repeat Until' in workouts
• Implemented a prompt if the timer is not reset after 4 hours to remind the user to reset
• Corrections to ANT wheel speed, size and auto calibration with PT hubs
• Course Map Zooming -> The device now pops up a page on the course map with the light key like is done for the course scaling. This page will allow the user to set the zooming to auto or to some set zoom level.
• Updated the Start Notice feature to alert the user any time the timer is not running if set to Repeat
• Fixed issue causing elapsed time to not be calculated correctly
• Delete Garmin software update files after updates are complete
• Updated translations
Last edited by chasmm; 07-17-10 at 07:09 AM.
#2
Zoom zoom zoom zoom bonk
Join Date: Sep 2006
Location: New Zealand
Posts: 4,624
Bikes: Giant Defy, Trek 1.7c, BMC GF02, Fuji Tahoe, Scott Sub 35, Kona Rove, Trek Verve+2
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 551 Post(s)
Liked 722 Times
in
366 Posts
Note no mention on garmin.connect of this but it appears in webupdater.
Seems to have kept all my old data and settings.
Seems to have kept all my old data and settings.
#3
Senior Member
Join Date: Jun 2009
Location: Northern IL
Posts: 51
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Updating now-Thank goodness! It was getting to the point where EVERY TIME I would press the lap button, the unit would freeze! Then, in the last week, I had my first case of 'lost data'...
This update, along with the Garmin Training Center update to add power to the workout options (and some other nice features) has really been a Godsend! I hope all goes well with the new update...
Just finished the update: Kept all of my screen configurations in tact! Acquired satellite signal extremely quickly (hugely noticeable)--good signs so far...
We'll see how it does on my ride tomorrow...
This update, along with the Garmin Training Center update to add power to the workout options (and some other nice features) has really been a Godsend! I hope all goes well with the new update...
Just finished the update: Kept all of my screen configurations in tact! Acquired satellite signal extremely quickly (hugely noticeable)--good signs so far...
We'll see how it does on my ride tomorrow...
#4
Senior Member
Thread Starter
Join Date: May 2010
Location: Long Island, NY
Posts: 1,637
Bikes: '85 Rossin Super Record, '88 Specialized Sequoia, '10 Raleigh Cadent FT2, '10 Specialized Roubaix Elite
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
neverquit
Electronics, Lighting, & Gadgets
13
09-22-19 01:40 PM
TromboneAl
Electronics, Lighting, & Gadgets
2
06-05-13 02:12 PM