Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Electronics, Lighting, & Gadgets (https://www.bikeforums.net/electronics-lighting-gadgets/)
-   -   flashlight thermal dynamcs? (https://www.bikeforums.net/electronics-lighting-gadgets/828412-flashlight-thermal-dynamcs.html)

no1mad 06-27-12 04:37 PM

flashlight thermal dynamcs?
 
Okay, I've got an 'Ultrafire 1x18650 5 mode with a claimed maximum output of 510 lumens. I found my helmet (had stashed it inside the trunk bag that I was no longer using) and attempted to mount the light to the helmet using some Velcro cable wraps. Only thing is the alloy body of the light slides too easily on the plastic surface of the helmets shell.

I'm thinking about either wrapping a section of old inner tube or even make a sleeve out of the tube to slide the flashlight into in order to create some friction.

Will doing so raise the temp to the point were it could harm the light or cause the cell to give me a lobotomy?

degnaw 06-27-12 05:29 PM

Do you ride in extreme heat? I know my light (a claimed 900 lumen P7) gets pretty hot on 'high' mode even without insulation, so I'd be wary about insulating it in 90-100+ weather.

no1mad 06-27-12 05:48 PM

My night vision isn't the best, so I avoid riding at night if I can and have as yet to actually use this light in 'to see' mode. That being said, it can be rougly 80 at sunrise, climb into the triple digits, and still be in the mid 90's an hour or so after Sunset- unless there are pop-up t-storms.


All times are GMT -6. The time now is 04:51 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.