Best LED Wheel Lights
#1
Junior Member
Thread Starter
Join Date: Jun 2013
Location: Fairbanks, Alaska
Posts: 130
Bikes: 2018 Salsa Mukluk, 85 Faggin, Brompton 6, 04 Lemond Wayzata (Poprad Clone), '97 Novara Randonee (DD/ touring workhorse)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Best LED Wheel Lights
I'm new to the forum, but am rebuilding an old bike and am very interested in having my wheels light up for safety.
I've seen a few different designs for LED wheel lights, including:
1) MonkeyLectric:
https://www.monkeylectric.com/
https://www.amazon.com/MonkeyLectric-...=Monleylectric
2) Revolights:
https://revolights.com/#lighting
3) Rimfire.
https://www.amazon.com/Rimfire-Lighti...ef=pd_sim_sg_4
THere are seem to be a few more cheaper alternatives, with small LEDs that attach to your pressure cap or on the edge of spokes. I'm up for whatever, and am looking for a medium-cost, long-lasting, secure (not easy to steal), and bright lighting system.
Any insight or experiences would be appreciated.
I've seen a few different designs for LED wheel lights, including:
1) MonkeyLectric:
https://www.monkeylectric.com/
https://www.amazon.com/MonkeyLectric-...=Monleylectric
2) Revolights:
https://revolights.com/#lighting
3) Rimfire.
https://www.amazon.com/Rimfire-Lighti...ef=pd_sim_sg_4
THere are seem to be a few more cheaper alternatives, with small LEDs that attach to your pressure cap or on the edge of spokes. I'm up for whatever, and am looking for a medium-cost, long-lasting, secure (not easy to steal), and bright lighting system.
Any insight or experiences would be appreciated.
#2
Junior Member
Thread Starter
Join Date: Jun 2013
Location: Fairbanks, Alaska
Posts: 130
Bikes: 2018 Salsa Mukluk, 85 Faggin, Brompton 6, 04 Lemond Wayzata (Poprad Clone), '97 Novara Randonee (DD/ touring workhorse)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Bump, Anyone?
Or are there other less expensive, DIY options?
Or are there other less expensive, DIY options?
#3
Senior Member
I've used the Rimfires almost a year now. When I bought mine they were $12 per wheel. ( I think the price has gone up )
The one on my front wheel has gone out a time or two. Not sure why but maybe a problem with the battery contacts. I tweeked the contacts the last time I charged the batteries and had no problems on the last ride. The problem might have been just the batteries being low, not really sure. Other than that they work great and really get you noticed. The only thing I don't like about them is that they are not easy to mount. That means once you got them mounted you really don't want to take they off unless you have to. The battery compartment is just plastic and no telling how long it will last
A while back I saw these mini LED spoke mounted lights ( Atozi Wheel spoke leds ) and thought these might be easier to take on/off your bike. These look a little better than the standard cheap valve cap type leds. The down side is they use button cells but you can buy those by the card ( for a song ) from the Chinese websites. I bought four of the cheaper generic valve stem type lights last year and had nothing but problems with them. That is why I switched to the Rimfires. At least with the Rimfires I can use rechargeable AA's. At some point I will give the Atozi's a try. Would be nice to just slip those on/off my Mountain bike for those short road sections.
The one on my front wheel has gone out a time or two. Not sure why but maybe a problem with the battery contacts. I tweeked the contacts the last time I charged the batteries and had no problems on the last ride. The problem might have been just the batteries being low, not really sure. Other than that they work great and really get you noticed. The only thing I don't like about them is that they are not easy to mount. That means once you got them mounted you really don't want to take they off unless you have to. The battery compartment is just plastic and no telling how long it will last
A while back I saw these mini LED spoke mounted lights ( Atozi Wheel spoke leds ) and thought these might be easier to take on/off your bike. These look a little better than the standard cheap valve cap type leds. The down side is they use button cells but you can buy those by the card ( for a song ) from the Chinese websites. I bought four of the cheaper generic valve stem type lights last year and had nothing but problems with them. That is why I switched to the Rimfires. At least with the Rimfires I can use rechargeable AA's. At some point I will give the Atozi's a try. Would be nice to just slip those on/off my Mountain bike for those short road sections.
Last edited by 01 CAt Man Do; 06-17-13 at 05:00 AM.
#4
Junior Member
Thread Starter
Join Date: Jun 2013
Location: Fairbanks, Alaska
Posts: 130
Bikes: 2018 Salsa Mukluk, 85 Faggin, Brompton 6, 04 Lemond Wayzata (Poprad Clone), '97 Novara Randonee (DD/ touring workhorse)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Okay, lots of good information here. I'll certainly do more research on both the Rimfires and the Atozi's. Thanks for the insight!
Would love to hear people's experiences with the MonkeyLectics...
Would love to hear people's experiences with the MonkeyLectics...
#5
Senior Member
I think with Monkeylectics and other wheel lights the emphasis is more on providing a side show. My purpose is just to get me seen. I wish there were more choices. The rimfires work but I could wish for something that is more easy on / easy off. Real important to have a battery compartment that blends more with the bike and creates no "wheel balance issues". It would be nice to have the battery compartment made to clamp around the hub of the wheel and yet cause no balance issue. Better to have the batteries horizontal ( with the hub ) and preferable with Li-ion cells. I like the rimfires as "proto-type" but I'd like something better engineered. I would also like to be able to choose the color of my LED's. I don't want so much of a show I just want to be seen.
#6
Junior Member
Thread Starter
Join Date: Jun 2013
Location: Fairbanks, Alaska
Posts: 130
Bikes: 2018 Salsa Mukluk, 85 Faggin, Brompton 6, 04 Lemond Wayzata (Poprad Clone), '97 Novara Randonee (DD/ touring workhorse)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
I've gone ahead and order the MonkeyLectric Minis. The Revolights are clearly the best, but are out of my price range. The Monkeylectric minis mount near the hub and I think should offer a good light show for cars to see me. I'll post a review here once I get them up and running. This would be a good place for others to share their experiences though...
#7
Senior Member
Join Date: Mar 2012
Location: Seattle, WA
Posts: 177
Bikes: Brompton H6L raw lacquer (2012)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Does it have to be wheel lights? How about the BikeGlow Safety lights? They look cool. I've seen a couple bikes go by with them on at night and they definitely catch your attention.
#9
Junior Member
Thread Starter
Join Date: Jun 2013
Location: Fairbanks, Alaska
Posts: 130
Bikes: 2018 Salsa Mukluk, 85 Faggin, Brompton 6, 04 Lemond Wayzata (Poprad Clone), '97 Novara Randonee (DD/ touring workhorse)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
I considered the bikeglow. Its a good point that it doesn't just have to be "lights."
I stayed away from bikeglow simply because I didn't like the look of them wrapped around the frame. If you could do it around just the wheels, that'd be really cool.
I stayed away from bikeglow simply because I didn't like the look of them wrapped around the frame. If you could do it around just the wheels, that'd be really cool.
#10
Senior Member
I've decided to order a couple of the Atozi's. Personally I just like the idea of something small and light-weight that is easy to put on and take off the wheel. I also like the idea of being able to choose the color. Something in a neon green or amber should fit my bill. I just hope that when I get them that they don't cut off like the cheap valve stem type lights. Not to mention the valve stem type lights were terrible in cold weather. I figure it's worth throwing some bucks at just to see if these are any better. Sometimes you gott'a roll them dice. I'll post back if the results are good.
#11
Senior Member
Join Date: Feb 2013
Location: Los Angeles, CA
Posts: 64
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I know that you've already ordered but.... I agree with vol's post above ^^^^ I've been using 'Nite Ize SpokeLit' spoke lights (https://bit.ly/TN13iS) for about a year now and haven't had any problems. You can find them at any LBS and on Ebay/Amazon as well.... They take (2) 3V CR2016 batteries which you can purchase inexpensively by the card on Ebay or Amazon. You can easily install and remove them and they grip really well. I don't really ride in rain.. (I live in So Cal..where it rarely rains).. so I don't know about a good waterproof test. I run mine on strobe for the most part so that it conserves battery life. Along with my Cygolite front and rear lights, Cars and pedestrians see me...... I've seen the combo literally stop people in their tracks. (which in my opinion is needed)
#12
Junior Member
Thread Starter
Join Date: Jun 2013
Location: Fairbanks, Alaska
Posts: 130
Bikes: 2018 Salsa Mukluk, 85 Faggin, Brompton 6, 04 Lemond Wayzata (Poprad Clone), '97 Novara Randonee (DD/ touring workhorse)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Okay, some good points here. Even though I've already ordered, I have two bikes, and this just covers 1/4 wheels, so your suggestions will certainly come in handy in the future.
Totally agree about the lightness and simplicity...
I also think that MonkeyLectrics are cool, but very much for show
Totally agree about the lightness and simplicity...
I also think that MonkeyLectrics are cool, but very much for show
#13
Senior Member
I know that you've already ordered but.... I agree with vol's post above ^^^^ I've been using 'Nite Ize SpokeLit' spoke lights (https://bit.ly/TN13iS) for about a year now and haven't had any problems. You can find them at any LBS and on Ebay/Amazon as well.... They take (2) 3V CR2016 batteries which you can purchase inexpensively by the card on Ebay or Amazon. You can easily install and remove them and they grip really well. I don't really ride in rain.. (I live in So Cal..where it rarely rains).. so I don't know about a good waterproof test. I run mine on strobe for the most part so that it conserves battery life. Along with my Cygolite front and rear lights, Cars and pedestrians see me...... I've seen the combo literally stop people in their tracks. (which in my opinion is needed)
Last edited by 01 CAt Man Do; 06-20-13 at 02:04 PM.
#14
Senior Member
Don't know what you mean by "funky", but they look pretty much like the regular spoke reflectors, very inconspicuous, so less worry about theft if leaving them on. My only complaint is how hard one needs to press the button to turn it on and off. The stiffness varies among individual products, but some of them are so stiff that it is almost impossible to turn them on with fingers. Once on, they are great, especially in very dark surroundings. Not only for side visibility; even when looking from the front or behind, as long as you are not in direct 0 degree angle, they are visible, too, because of the brightness.
#15
Senior Member
Don't know what you mean by "funky", but they look pretty much like the regular spoke reflectors, very inconspicuous, so less worry about theft if leaving them on. My only complaint is how hard one needs to press the button to turn it on and off. The stiffness varies among individual products, but some of them are so stiff that it is almost impossible to turn them on with fingers. Once on, they are great, especially in very dark surroundings. Not only for side visibility; even when looking from the front or behind, as long as you are not in direct 0 degree angle, they are visible, too, because of the brightness.
#16
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,431
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 3132 Post(s)
Liked 1,700 Times
in
1,027 Posts
Well they may be bright enough, but Spokelits are not bright compared to Monkeylights, not even close.
#17
Senior Member
My road setup already has great front and rear lighting. Even without any additional side lighting the bike is visible from the sides to a limited degree. Increasing side visibility doesn't mean you have to add more heavier objects to your bike. There are always smaller, lighter options that will, "get the job done". Finding the best compromise is the way to go ( IMO ).
#19
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,431
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 3132 Post(s)
Liked 1,700 Times
in
1,027 Posts
#20
Senior Member
Join Date: Sep 2010
Location: NE Indiana
Posts: 8,686
Bikes: 2020 Masi Giramondo 700c; 2013 Lynskey Peloton; 1992 Giant Rincon; 1989 Dawes needs parts; 1985 Trek 660; 1985 Fuji Club; 1984 Schwinn Voyager; 1984 Miyata 612; 1977 Raleigh Competition GS
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1125 Post(s)
Liked 249 Times
in
200 Posts
Revolights see this: https://www.kickstarter.com/projects/...the-revolution About 2:30 into the film the light show begins.
#21
Senior Member
Too much fanciness/complexity can be distracting to both drivers and oneself. Even when I used the disc-o spokelit (whose color constantly changes) I found myself frequently watching and admiring the lights themselves. I used to have them on the rear wheel, so I kept looking back. Now I moved them to the front--at least I don't have to keep turning back.
Last edited by vol; 06-23-13 at 08:12 PM.
#22
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,431
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 3132 Post(s)
Liked 1,700 Times
in
1,027 Posts
Well of course they're not. You can't compare the output of a single LED to something that uses multiple LEDs and displays a graphic. That would be like comparing a keychain light to an HDTV. If your intent is just to increase your side visibility at night a couple single leds on the wheel will work fine. They work even better if you use at least two per wheel ( the more the better ). The Monkeylites are great but have the drawbacks of being heavier and having mounting issues. If you want your wheel to remain balanced you will need at least two per wheel. This of course adds more weight to the wheel and this also of course means more money will have to be spent. This is not something that most people want to deal with just to get seen from the side a little better.
My road setup already has great front and rear lighting. Even without any additional side lighting the bike is visible from the sides to a limited degree. Increasing side visibility doesn't mean you have to add more heavier objects to your bike. There are always smaller, lighter options that will, "get the job done". Finding the best compromise is the way to go ( IMO ).
My road setup already has great front and rear lighting. Even without any additional side lighting the bike is visible from the sides to a limited degree. Increasing side visibility doesn't mean you have to add more heavier objects to your bike. There are always smaller, lighter options that will, "get the job done". Finding the best compromise is the way to go ( IMO ).
I also do not agree that the Monkeylights require pairs to balance properly. It was true for the 1st gen units, particularly at high speeds, but the hub mounted battery packs of current offerings virtually eliminated the balance problem.
#23
Senior Member
Apparently we agree, then, that the Spokelits are not bright compared to the competition (which is the context of this thread). If you feel they are 'bright enough,' I won't argue that point, but I do not agree, and feel the increased brightness of the Monkeylights greatly improves not only side visibility, but off-angle visibility. And that's not to do so much with number of LEDS, but the low electrical power available to the Spokelits.
I also do not agree that the Monkeylights require pairs to balance properly. It was true for the 1st gen units, particularly at high speeds, but the hub mounted battery packs of current offerings virtually eliminated the balance problem.
I also do not agree that the Monkeylights require pairs to balance properly. It was true for the 1st gen units, particularly at high speeds, but the hub mounted battery packs of current offerings virtually eliminated the balance problem.
A couple things are very clear with the Monkeyelectic's. They are very bright and very cool to look at ( at night ). Downside is that mounting is not easy on / easy off. This means you aren't going to want to take them off for day rides unless you have a good supply of the black plastic straps on hand and don't mind the fuss. Otherwise, be prepared to look at them on your wheels during the day.
I hate having to look at the Rimfires on my bike during the day but taking them off would be way too much of a inconvenience. At least the clear plastic of the Rimfire battery hub is not too noticeable when the bike is moving. There are some minor balance issues with the Rimfires so getting it all to work is not always easy. This is why I'm continuing to look for a simpler solution, one that is easy-on / easy-off yet still bright enough to draw attention.
#24
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,431
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 3132 Post(s)
Liked 1,700 Times
in
1,027 Posts
I don't own one of the Monkeylectric lights but judging from the installation video ( of the 210 model ) "balance" might be an issue. I can't say absolutely for sure because I don't own one. They do say on the video that you need to mount the battery case "in line" with the light unit to maintain balance and while this makes sense to some degree I can't help but wonder that even when installed per instructions if the wheel will maintain it's balance, particularly at speed. The battery case straps to the hub via two plastic tie lock straps. Once the wheel starts moving I can't help but wonder how well the battery case keeps it's place ( once rotational inertia kicks in ).
A couple things are very clear with the Monkeyelectic's. They are very bright and very cool to look at ( at night ). Downside is that mounting is not easy on / easy off. This means you aren't going to want to take them off for day rides unless you have a good supply of the black plastic straps on hand and don't mind the fuss. Otherwise, be prepared to look at them on your wheels during the day.
I hate having to look at the Rimfires on my bike during the day but taking them off would be way too much of a inconvenience. At least the clear plastic of the Rimfire battery hub is not too noticeable when the bike is moving. There are some minor balance issues with the Rimfires so getting it all to work is not always easy. This is why I'm continuing to look for a simpler solution, one that is easy-on / easy-off yet still bright enough to draw attention.
A couple things are very clear with the Monkeyelectic's. They are very bright and very cool to look at ( at night ). Downside is that mounting is not easy on / easy off. This means you aren't going to want to take them off for day rides unless you have a good supply of the black plastic straps on hand and don't mind the fuss. Otherwise, be prepared to look at them on your wheels during the day.
I hate having to look at the Rimfires on my bike during the day but taking them off would be way too much of a inconvenience. At least the clear plastic of the Rimfire battery hub is not too noticeable when the bike is moving. There are some minor balance issues with the Rimfires so getting it all to work is not always easy. This is why I'm continuing to look for a simpler solution, one that is easy-on / easy-off yet still bright enough to draw attention.