Is there some kind of "locking" bottle cage?
#1
Senior Member
Thread Starter
Is there some kind of "locking" bottle cage?
I do a lot of group rides on rough roads. I carry a large insulated water bottle with a screw top in a cage that's fastened to the seat tube. The bottle is somewhat heavy and the problem is that sometimes when I hit a big bump, the bottle ejects itself and lands on the road, creating a hazard for everybody else. For now I hold it in place with a small bungee cord, but that makes it hard to get a quick gulp at the red lights.
Does anyone know of a bottle cage with any kind of easy release fastener or latch? I'm thinking of something like a so-called draw latch with a lever that swings over, like the latch on fire extinguisher holder.
Thanks in advance.
Does anyone know of a bottle cage with any kind of easy release fastener or latch? I'm thinking of something like a so-called draw latch with a lever that swings over, like the latch on fire extinguisher holder.
Thanks in advance.
#2
Senior Member
Join Date: Mar 2007
Posts: 6,401
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 13 Times
in
13 Posts
A company called REG made cages with a little spring-loaded gadget that locked the bottle into place, petty much like you describe. Most of them were chromed steel, though they also made some in plastic with various colors available. The chrome ones are kind of cool if you're into vintage, but they do rust. The plastic ones are double ugly, IMO, regardless of color. An Ebay search for "REG bottle cage" should give decent results.
But I don't think you need to go to such extremes. I've been using big insulated screw-top bottles in seat-tube-mounted cages for years without a single problem - and I ride mostly off-road. I think you've just got a lousy cage. Good ones are not hard to find. I personally like the stainless cages offered by Performance, but any decent, non-trick (leave the carbon fiber at home...) cage should hold onto your bottle just fine.
But I don't think you need to go to such extremes. I've been using big insulated screw-top bottles in seat-tube-mounted cages for years without a single problem - and I ride mostly off-road. I think you've just got a lousy cage. Good ones are not hard to find. I personally like the stainless cages offered by Performance, but any decent, non-trick (leave the carbon fiber at home...) cage should hold onto your bottle just fine.
#3
Senior Member
Join Date: Feb 2006
Posts: 524
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Likes: 0
Liked 17 Times
in
13 Posts
Another alternative is a cage that releases to its side rather than the conventional top. I can't recall brands/models offhand, but they do exist.
Last edited by dorkypants; 02-03-15 at 10:33 PM. Reason: fix conjugation error
#4
Senior Member
Join Date: Dec 2014
Location: Missouri
Posts: 710
Bikes: Nashbar CR5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
So I know you probably are fond of your current bottle but just as a 'suggestion', I bought these bottles;
https://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1
I ordered the 24 ounce, not the 21. Evidently, the 21 is intended for bottle cages. The 24 is not. It fits. And it fits well. But it is a bit of a squeeze. While I'm able to get it out while riding without too much difficulty; I don't think there's any way this bottle would self-eject. It's a 'snug fit'.
Food for thought. Maybe just a slightly-too-big water bottle with a snug fit is as good or better a solution than some sort of locking bottle cage.
https://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1
I ordered the 24 ounce, not the 21. Evidently, the 21 is intended for bottle cages. The 24 is not. It fits. And it fits well. But it is a bit of a squeeze. While I'm able to get it out while riding without too much difficulty; I don't think there's any way this bottle would self-eject. It's a 'snug fit'.
Food for thought. Maybe just a slightly-too-big water bottle with a snug fit is as good or better a solution than some sort of locking bottle cage.
#5
Lost at sea...
Join Date: Dec 2012
Location: Western PA
Posts: 935
Bikes: Schwinn Paramount (match), Trek 520, random bits and pieces...
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Just grab some velcro at the hardware store and make a seat-belt...
#6
Senior Member
Join Date: Jan 2009
Location: Colorado Springs, CO
Posts: 5,971
Bikes: 2015 Charge Plug, 2007 Dahon Boardwalk, 1997 Nishiki Blazer, 1984 Nishiki International, 2006 Felt F65, 1989 Dahon Getaway V
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1364 Post(s)
Liked 1,676 Times
in
827 Posts
#7
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,102 Times
in
1,366 Posts
I'm guessing that there is something unacceptable about normal everyday bottles and cages, which do snap in just fine. Too low capacity, uninsulated? Have you considered a Camel?
__________________
Genesis 49:16-17
Genesis 49:16-17
#8
Banned
I use a toe strap , and put the bottle cage on over the strap . snugging down the strap kept my Fuel bottle
under the downtube from going anywhere .. should work for whatever you have going in ..
under the downtube from going anywhere .. should work for whatever you have going in ..
#10
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,895
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2599 Post(s)
Liked 1,924 Times
in
1,208 Posts
Not much help, I know, but I really wanted to anser the title two ways:
Maybe you need to avoid those rough neighborhoods where you bottles get stolen.
What have you go in those bottles that they need to be locked?
Maybe you need to avoid those rough neighborhoods where you bottles get stolen.
What have you go in those bottles that they need to be locked?
#12
Senior Member
Thread Starter
Thanks everyone for all the excellent replies. Several good ideas here, but I'm going to start by ordering the Arundel cage. The knob type fastener is pretty close to what I was imagining.
FWIW, I also found the VO Retro Cage (below), which also looks quite nice and is described as being very secure in rough terrain. If the Arundel doesn't work out for some reason, I'll try the VO.
I had tried many other bottle cages over the past year, but in all cases there were problems where the bottle went flying when I hit big bumps or potholes.
Thanks again!
FWIW, I also found the VO Retro Cage (below), which also looks quite nice and is described as being very secure in rough terrain. If the Arundel doesn't work out for some reason, I'll try the VO.
I had tried many other bottle cages over the past year, but in all cases there were problems where the bottle went flying when I hit big bumps or potholes.
Thanks again!
#13
Senior Member
Join Date: Jul 2008
Location: Minneapolis, MN
Posts: 6,432
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 539 Post(s)
Liked 44 Times
in
38 Posts
Was gonig to mention, this is the closest I know of in a regular cage, the Topeak Modula EX Bicycle Water Bottle Cage:
Topeak® Cycling Accessories ? Products - Modula? Cage EX, Black
[IMG]https://www.topeak.com/mediafiles/products/2540/thumbnail[IMG]
If you were willing to get a different bottle, buying a bike-specific waterbottle along with a mountain bike cage is rock solid in my experience.
Like Specialized Bottles:
Specialized Bicycle Components
And Specialized Cages:
Specialized Bicycle Components
I have the Zee Cage:
Specialized Bicycle Components
The bottle just stays in there no matter what I hit, when mountain biking.
Topeak® Cycling Accessories ? Products - Modula? Cage EX, Black
[IMG]https://www.topeak.com/mediafiles/products/2540/thumbnail[IMG]
If you were willing to get a different bottle, buying a bike-specific waterbottle along with a mountain bike cage is rock solid in my experience.
Like Specialized Bottles:
Specialized Bicycle Components
And Specialized Cages:
Specialized Bicycle Components
I have the Zee Cage:
Specialized Bicycle Components
The bottle just stays in there no matter what I hit, when mountain biking.
#14
Senior Member
Join Date: Jun 2008
Location: Pittsburgh, PA
Posts: 2,468
Bikes: Co-Motion Cappuccino Tandem,'88 Bob Jackson Touring, Co-Motion Cascadia Touring, Open U.P., Ritchie Titanium Breakaway, Frances Cycles SmallHaul cargo bike. Those are the permanent ones; others wander in and out of the stable occasionally as well.
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 427 Post(s)
Likes: 0
Liked 339 Times
in
229 Posts
Adventure cycling sells the Salsa Anything cage you should also consider.
#15
Senior Member
Join Date: Mar 2014
Location: Northwest Ohio
Posts: 176
Bikes: Schwinns and Miyatas
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If you don't find the "perfect" bottle cage, you could try fitting the proper length rubber band type material ( girls hair bands, industrial rubber bands used for packaging, etc. ), to make a small loop around the top of the cage and then over the top of the bottle to hold it firmly in place. To remove the bottle, you simply lift the rubber band type loop off of the bottle and it hangs right on to the cage. You should be able to then remove the bottle to drink and then replace the bottle and slip the rubber band back over the top of the bottle to hold it securely in the cage. You may be able to find the type of rubber band for free and replace as necessary. Length and tension could be adjusted by where it's attached to the cage or by tying knots in the length to shorten it up. You should be able to slip the band from the top of the bottle in a second for removal and the same for the return to the cage. Should be a "cheap" alternative if it works for you.
Last edited by 1 Miyata Biker; 02-09-15 at 03:26 PM.
#17
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,386
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,687 Times
in
2,510 Posts
the IRIS King Cage is very secure, I think you should try that. link: King Cage - Bicycle waterbottle cages handmade in Durango, CO
#18
Senior Member
Join Date: Jan 2015
Location: SoCal
Posts: 108
Bikes: Trek 7.4 FX (2014)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Just ordered this - I have 24oz dual-wall Thermos bottle that needs special care - requires large holder and don't want to bounce it out on a bad bump/spill. Arrives Saturday, and looks perfect for my (and maybe your) needs. This cage is adjustable in both height and in diameter, so it should fit almost anything you can throw at it. One reviewer even posted a pic of it holding a wine bottle for his evenings out.
https://amazon.com/Topeak-Modula-Java...+bottle+holder
I'm embarrassingly excited about it arriving.
They also have this from Topeak, which isn't as secure, but looks like a pretty good option as well.
https://amazon.com/Topeak-Modula-Cage...+bottle+holder
Didn't use this one as the lip on the back part of the holder is too low and would press against the back of my rather tall bottle pushing it forward rather than holding it in.
https://amazon.com/Topeak-Modula-Java...+bottle+holder
I'm embarrassingly excited about it arriving.
They also have this from Topeak, which isn't as secure, but looks like a pretty good option as well.
https://amazon.com/Topeak-Modula-Cage...+bottle+holder
Didn't use this one as the lip on the back part of the holder is too low and would press against the back of my rather tall bottle pushing it forward rather than holding it in.
Last edited by Redflea; 02-12-15 at 06:22 PM.