How do these geometry figures affect riding?
#1
Senior Member
Thread Starter
How do these geometry figures affect riding?
How do front center, chain stay length, head tube angle affect riding?
#2
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,879
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1858 Post(s)
Liked 664 Times
in
506 Posts
Front center and chainstay length set your fore-aft weight distribution. If the proportions are right, you get better handling and possibly stability.
Head tube angle affects the tendency of the fork to flop (called flop), and combined with fork offset and wheel diameter determines trail, which is really important in designing how your frame will steer.
FC and CS have something to do with fit, and head angle less so. But, a more laid-back head tube can result in longer FC, so it's not like there's no connection to fit.
Head tube angle affects the tendency of the fork to flop (called flop), and combined with fork offset and wheel diameter determines trail, which is really important in designing how your frame will steer.
FC and CS have something to do with fit, and head angle less so. But, a more laid-back head tube can result in longer FC, so it's not like there's no connection to fit.
#4
Senior Member
Join Date: Feb 2001
Location: England
Posts: 12,948
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
A short Front Centre creates toe-clip overlap, which is undesirable for low-speed urban riding or loaded riding.
Head-tube angle affects the sensitivity of the bike to changes in fork rake.
CS length affects rear-triangle siffness, pedal interference, as well as fore-aft weight distribution.
Head-tube angle affects the sensitivity of the bike to changes in fork rake.
CS length affects rear-triangle siffness, pedal interference, as well as fore-aft weight distribution.
#5
Senior Member
Thread Starter
Would it be right to say that in general, shorter front center, greater seat (not head) tube angle, and shorter wheel base are more for speedy rides such as racing, and the opposite are more for leisure/urban/touring/slow riding?
#6
Senior Member
Join Date: Aug 2014
Posts: 360
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts