I've finished my Raleigh Project
#1
Raleigh20 PugFixie, Merc
Thread Starter
So my LocalBikeShop FINALLY finished lacing the SRAM hub into the rim on Friday so I've been able to finish the build and take her for a spin; needed some adjustment to get the steering non-skittery but she's running like a dream now. The frame was stripped, blasted, new v-brake bosses added and sprayed/laquered/decaled by the good folks at M.Steel Cycles, Newcastle who did a wonderful job
https://www.msteelcycles.co.uk/
Ok here's the anal bit
Original Parts used:
Frame
Frame Bolt
Rear Rack (Sprayed with matt-black 'barbecue paint')
Handlebars ( " " )
Parts list:
2x 406 Diamondback Black Alloy Rims
2x Schwalbe Stelvio 'Dahon Speed edition" tyres
Shimano Deore V-Brakes front and rear.
Chili Works 1" threaded Suspension fork (cheap and cheerful and a bit 'divey')
Tange 1" threaded headset
Kalloy 1" Angle-Adjustable quill Stem
Second hand Scott ATB Brake handles (eBay)
Cane Creek ergonomic bar-ends
Shimano UN-72 Bottom Bracket, held in with Phil Wood rings
Shimano Tiagra Chainset w.52 tooth cog and long arms (175mm?) (will remove second ring when I get pre-ordered singlespeed bolts)
Shimano SPD clipless pedals
SRAM Spectro 7 hub and shifters
SRAM silver link chain
Selle Italia lightweight road saddle
Altura Saddlebag
KF seatpost clip
Ultralight suspension seatpost (can't remember manufacturer but was not a cheapy!)
Cateye Lights
Marware iPod clip
New Raleigh headpost badge from eBay
No-name lightweight mudguard (rear)
Cateye Velo 5 cycloputer
You can see a full gallery of my wee beauty at:
https://littlepixel.info/twenty/Anoth...y/Gallery.html
https://www.msteelcycles.co.uk/
Ok here's the anal bit
Original Parts used:
Frame
Frame Bolt
Rear Rack (Sprayed with matt-black 'barbecue paint')
Handlebars ( " " )
Parts list:
2x 406 Diamondback Black Alloy Rims
2x Schwalbe Stelvio 'Dahon Speed edition" tyres
Shimano Deore V-Brakes front and rear.
Chili Works 1" threaded Suspension fork (cheap and cheerful and a bit 'divey')
Tange 1" threaded headset
Kalloy 1" Angle-Adjustable quill Stem
Second hand Scott ATB Brake handles (eBay)
Cane Creek ergonomic bar-ends
Shimano UN-72 Bottom Bracket, held in with Phil Wood rings
Shimano Tiagra Chainset w.52 tooth cog and long arms (175mm?) (will remove second ring when I get pre-ordered singlespeed bolts)
Shimano SPD clipless pedals
SRAM Spectro 7 hub and shifters
SRAM silver link chain
Selle Italia lightweight road saddle
Altura Saddlebag
KF seatpost clip
Ultralight suspension seatpost (can't remember manufacturer but was not a cheapy!)
Cateye Lights
Marware iPod clip
New Raleigh headpost badge from eBay
No-name lightweight mudguard (rear)
Cateye Velo 5 cycloputer
You can see a full gallery of my wee beauty at:
https://littlepixel.info/twenty/Anoth...y/Gallery.html
Last edited by LittlePixel; 04-19-08 at 09:33 AM.
#2
Senior Member
Join Date: Jul 2003
Location: in bed with your mom
Posts: 13,696
Bikes: who cares?
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Nice! Does it handle better? It looks like the suspension fork has raised the front of the frame and changed the wheelbase and fork rake angle a bit. I should think that would improve the handling.
#6
Raleigh20 PugFixie, Merc
Thread Starter
Originally Posted by randya
Nice! Does it handle better? It looks like the suspension fork has raised the front of the frame and changed the wheelbase and fork rake angle a bit. I should think that would improve the handling.
#7
Raleigh20 PugFixie, Merc
Thread Starter
Originally Posted by Stacy
Beautiful!
Just out of curiosity how much does it weigh?
Just out of curiosity how much does it weigh?
#9
Senior Member
Very nice. I love the black wheels and that's a really nice paint job. The rear V-brake is great also.
One comment - you may end up wanting a front fender to keep the grit out of your face when riding in the rain. My 20 has Bike Friday fenders, but they are a bit expensive if you get them new. Recumbent fenders may work. Check out Gaerlan for some ideas. You may also want a waterbottle cage for distance riding.
Do you plan to travel with the bike?
One comment - you may end up wanting a front fender to keep the grit out of your face when riding in the rain. My 20 has Bike Friday fenders, but they are a bit expensive if you get them new. Recumbent fenders may work. Check out Gaerlan for some ideas. You may also want a waterbottle cage for distance riding.
Do you plan to travel with the bike?
#10
Raleigh20 PugFixie, Merc
Thread Starter
Originally Posted by cheg
Very nice. I love the black wheels and that's a really nice paint job. The rear V-brake is great also.
One comment - you may end up wanting a front fender to keep the grit out of your face when riding in the rain. My 20 has Bike Friday fenders, but they are a bit expensive if you get them new. Recumbent fenders may work. Check out Gaerlan for some ideas. You may also want a waterbottle cage for distance riding.
Do you plan to travel with the bike?
One comment - you may end up wanting a front fender to keep the grit out of your face when riding in the rain. My 20 has Bike Friday fenders, but they are a bit expensive if you get them new. Recumbent fenders may work. Check out Gaerlan for some ideas. You may also want a waterbottle cage for distance riding.
Do you plan to travel with the bike?
I actually do have a front mudguard but opted not to fit it right now for reasons of pure aesthetics. More honestly put - it looks a bit silly with those slick tyres. Neccessity will probably dictate I fit it very soon though as arriving at work with spots of mud like a dalmation is bound to wear a little thin. But I'll have a look at your links as a skinnier guard is what I'm really after. I had to abandon the plan to use the black skyway wheel as its axle was not long enough for the forks, plus the fact those tyres didn't sit very safely on the rim because of their lack of inner flanges.
Do I plan to travel? Well I do an 8 mile round commute every day to work and plan to use her on that for a while. My partner and I also have a semi-plan to get a VW camper so if we do this one and the purple stowaway you probably saw in a couple of the shots will come with and be our local day transport wherever we go.... Thanks again for your help and inspiration - if I hadn't seen yours none of this would have happened!
Huw
#11
Senior Member
Originally Posted by LittlePixel
Thanks - I thought you'd appreciate it.
I actually do have a front mudguard but opted not to fit it right now for reasons of pure aesthetics. More honestly put - it looks a bit silly with those slick tyres. Neccessity will probably dictate I fit it very soon though as arriving at work with spots of mud like a dalmation is bound to wear a little thin. But I'll have a look at your links as a skinnier guard is what I'm really after. I had to abandon the plan to use the black skyway wheel as its axle was not long enough for the forks, plus the fact those tyres didn't sit very safely on the rim because of their lack of inner flanges.
I actually do have a front mudguard but opted not to fit it right now for reasons of pure aesthetics. More honestly put - it looks a bit silly with those slick tyres. Neccessity will probably dictate I fit it very soon though as arriving at work with spots of mud like a dalmation is bound to wear a little thin. But I'll have a look at your links as a skinnier guard is what I'm really after. I had to abandon the plan to use the black skyway wheel as its axle was not long enough for the forks, plus the fact those tyres didn't sit very safely on the rim because of their lack of inner flanges.
Do I plan to travel? Well I do an 8 mile round commute every day to work and plan to use her on that for a while. My partner and I also have a semi-plan to get a VW camper so if we do this one and the purple stowaway you probably saw in a couple of the shots will come with and be our local day transport wherever we go.... Thanks again for your help and inspiration - if I hadn't seen yours none of this would have happened!
Huw
Huw
I was wondering more about whether you plan to pack it for air travel. My website is out of date in that regard. When I switched to the different bars and rear wheel I had to invert the frame in the case to make it fit. I'll update the site next time the bike is at home. I've left it in Florida since the beginnning of the year because of frequent business trips there.
#12
Senior Member
Join Date: Nov 2003
Location: Forest Park Il
Posts: 876
Bikes: Yeah Dahon Bike Friday Panasonic Dyno
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Despite the looks you might want to go with the fattest front fender you can get if it is too skinny water and dirt will get by.
#13
Raleigh20 PugFixie, Merc
Thread Starter
Originally Posted by cheg
I was wondering more about whether you plan to pack it for air travel..
Maybe - I haven't really considered it but I suppose I could - especially if I convert the purple stowaway too. Then me and my girlfriend could fly out to europe with them. But I suppose it wasn't a prime consideration in the build.
#15
Raleigh20 PugFixie, Merc
Thread Starter
Originally Posted by james Haury
Purple stowaway? There's a picture to see!
__________________
My Raleigh Twenty site | foldr : A flickr pool | #6460, #5632 & #3407 on the fixedgeargallery
My Raleigh Twenty site | foldr : A flickr pool | #6460, #5632 & #3407 on the fixedgeargallery
Last edited by LittlePixel; 03-21-07 at 08:26 PM.
#17
Senior Member
Join Date: Dec 2004
Location: New Hampshire
Posts: 52
Bikes: Road, FS mtn, SS mtn, cyclocross, fixie, folder
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
That's awesome! Great idea with the iPod mount.
I've slowly been building up my Twenty over the winter. I haven't bothered to paint it yet, still trying to get all of the mechanicals worked out. I'm hoping to bring it out for it's maiden voyage today. I had plans to install a front derailleur, but I scrapped it when I realized that I don't use it enough to make it worth the hassle. I need to get it out to work out the bugs. I'm still trying to decide on handlebars also, right now it has a set of Scott AT-3 bars. I'm debating between that, bullhorn and H-type like yours. I'm also considering building a fixed rear wheel.
Got to get some pictures up...
I've slowly been building up my Twenty over the winter. I haven't bothered to paint it yet, still trying to get all of the mechanicals worked out. I'm hoping to bring it out for it's maiden voyage today. I had plans to install a front derailleur, but I scrapped it when I realized that I don't use it enough to make it worth the hassle. I need to get it out to work out the bugs. I'm still trying to decide on handlebars also, right now it has a set of Scott AT-3 bars. I'm debating between that, bullhorn and H-type like yours. I'm also considering building a fixed rear wheel.
Got to get some pictures up...
#19
Raleigh20 PugFixie, Merc
Thread Starter
Originally Posted by dannyg1
Nicely done! May I ask you where you got those tires and for what price? Do they have more?
DG1
DG1
In answer to your question about the rubber: The tyres (tires) are 406 1 1/8" Shwalbe Stevio folding tyres. The fabulous 'mango' stripes are to go with the paint on a Dahon Speed Pro (https://www.dahon.com/speedpro.htm) for which the tyre has been manufactured as a special edition. They weren't cheap but I saw them for sale and *had* to get a pair. Have them inflated to 110 psi and they just roll and roll.
Here's the bike they're *meant* to be for:
I got them from this UK mailorder site "Cyclesmart" (which is handy living in London); not sure they'd ship overseas but I'm sure a good Schwalbe stockist near you may have them or be able to order them in for you....
https://www.cyclesmart.co.uk/shop/ind...s/TYS1902.html
__________________
My Raleigh Twenty site | foldr : A flickr pool | #6460, #5632 & #3407 on the fixedgeargallery
My Raleigh Twenty site | foldr : A flickr pool | #6460, #5632 & #3407 on the fixedgeargallery
Last edited by LittlePixel; 03-21-07 at 08:28 PM.
#20
Raleigh20 PugFixie, Merc
Thread Starter
My bars are actually the original chrome/steel originals sprayed black - they're not bad if still a bit heavy - narrower than a lot of bars and the big rise means there's less need to have a lot of stem protruding from the headset; Sadly though the width of the twist shift makes the right-hand brake lever a little hard to reach because it meant the brake fixing had to clamp a little way around the curve of the riser.
I'm begining to think I'd like to get some "Tora Tora" bullhorns and road levers as I seem to predominantly use the bar-ends - though how that would work in conjunction with the twist shifter is less apparent to me... Anyone got any ideas that wouldn't look stupid?
(LittlePixel hasn't actually *listened* to any music on his iPod whilst riding yet - he sees it as a 'summery activity' on quiet roads and isn't sure whether to endorse this contentious practice...)
I'd Love to see some pictures of yours: How did the maiden voyage go?
I'm begining to think I'd like to get some "Tora Tora" bullhorns and road levers as I seem to predominantly use the bar-ends - though how that would work in conjunction with the twist shifter is less apparent to me... Anyone got any ideas that wouldn't look stupid?
(LittlePixel hasn't actually *listened* to any music on his iPod whilst riding yet - he sees it as a 'summery activity' on quiet roads and isn't sure whether to endorse this contentious practice...)
Originally Posted by ChrisM
Got to get some pictures up...
__________________
My Raleigh Twenty site | foldr : A flickr pool | #6460, #5632 & #3407 on the fixedgeargallery
My Raleigh Twenty site | foldr : A flickr pool | #6460, #5632 & #3407 on the fixedgeargallery
Last edited by LittlePixel; 03-21-05 at 08:06 AM.
#21
Guest
Posts: n/a
Mentioned: Post(s)
Tagged: Thread(s)
Quoted: Post(s)
Originally Posted by LittlePixel
I actually do have a front mudguard but opted not to fit it right now for reasons of pure aesthetics. More honestly put - it looks a bit silly with those slick tyres. Neccessity will probably dictate I fit it very soon though as arriving at work with spots of mud like a dalmation is bound to wear a little thin. But I'll have a look at your links as a skinnier guard is what I'm really after. I had to abandon the plan to use the black skyway wheel as its axle was not long enough for the forks, plus the fact those tyres didn't sit very safely on the rim because of their lack of inner flanges.
Huw
Huw
You may be able to get them from: www.bikefix.co.uk/grasshopper.html
They certainly look quite good, and hopefully won't spoil your bike's cool looks.
Hopefully this will look as good one day... maybe?
#23
floor sleeper
Join Date: Jun 2002
Location: Here and there in the US
Posts: 998
Bikes: Raleigh Twenty, Puch 3 speed road conversion, lookin' into a Karate Monkey for a cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by easy racer
Can I also ask what length UN72 Shimano bottom bracket should I get to fit into the BB shell, with Phil Wood rings?
Thanks...
Take it Easy,
EZR.
Thanks...
Take it Easy,
EZR.