HiI have have these Schwinn tools that i think hold on to the frame
 

Hi I have have these Schwinn tools that i think hold on to the frame. I've seen them in my Schwinn Factory Dealer Service Repair Manual Volumes 1 and 2 that I just got.
Can you tell me what they are called and what they exactly are used for?



http://bikeforums.net/attachment.php...hmentid=402210

http://bikeforums.net/attachment.php...hmentid=402211

http://bikeforums.net/attachment.php...hmentid=402212

here's the manuals that they were in

http://bikeforums.net/attachment.php...hmentid=402213

http://bikeforums.net/attachment.php...hmentid=402214

thanks for your help. Andy

Those are repair stand clamps. They mount to a solid base and clamp onto a frame or better, onto the seatpost. Park sells similar ones for a lot of money.

As busdriver says, those are adjustable frame clamps for the Schwinn repair stands. Be careful when using them; if they're adjusted too tight they can dent thin walled frame tubes quite easily.

http://i32.photobucket.com/albums/d7...ps5c7271fb.jpg

Thanks guy's. I wasn't going to use them for myself. Along with the books, an old Schwinn angle finder and these clamps and a few other things I'm putting them up on ebay. I just didn't know what the clamps were or exactly used for so I didn't know how to list them.

After redin this forum I had a good idea you guys would know what they were.

one more thing what would you suggest I should put them up on ebay for? thanks

Is this picture taken out of the Schwinn service manual that I posted a picure of in this thread? If so do you no what page? thanks

I suspect they were actually made by Park, and just sold under the Schwinn name.

New, they sell for about $120:

Bike Tools Etc. - 1000's of bicycle tools and parts for the home mechanic!

Thanks, I'll try and get 100 plus shipping for the pair. These clamps look to be made pretty strong.

You could probably get more if you sold them individually.

gotcha. good idea.

Yes; in the edition I have it's page 38 of Volume 1.

I must have a different addtion. What section was it in? thanks

"Tools and Equipment" which starts on page 25 and ends on page 39 of Volume 1.

sounds good I'll check that out.