Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

From Clips To Cleats

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

From Clips To Cleats

Old 08-14-05, 04:03 PM
  #1  
Senior Member
Thread Starter
 
Jason Curtiss's Avatar
 
Join Date: Jul 2005
Location: Houston, Texas
Posts: 144

Bikes: Bianchi Intenso

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
From Clips To Cleats

Well, I finally did it; I converted to cleats. This was a huge step for me, as I had been riding with toe clips for over 25 years. Anyway, I did the deed today and converted my shoes and both my road bikes to cleat style pedals.

Now, I had been lead to believe that my biggest problem as a cleat-novice would be un-cleating at stoplights. I recall hearing many stories about cleat novices falling over when stopping at an intersection.

However, I found that getting out of cleats when stopped was a breeze! It takes some work to get out of toe clips at a stoplight, so twisting my foot to uncleat was no big deal.

But, cleating back into my pedals proved to be a bigger challenge than I had anticipated. Sometimes it takes several minutes of fiddling around to get cleated in. I know that this is not the norm, having watched thousands of people cleat in their pedals in a matter of seconds at the start of a century.

So, my question is: what is the dang secret to cleating into your pedals**********

Thank you,

Jason
Well, I finally did it; I converted to cleats. This was a huge step for me, as I had been riding with toe clips for over 25 years. Anyway, I did the deed today and converted my shoes and both my road bikes to cleat style pedals.

Now, I had been lead to believe that my biggest problem as cleat novice would be un-cleating at stoplights. I recall hearing many stories about cleat novices falling over when stopping at an intersection.

However, I found that getting out of cleats when stopped was a breeze! It takes some work to get out of toe clips at a stoplight, so twisting my foot to uncleat was no big deal.

But, cleating back into my pedals proved to be a bigger challenge than I had anticipated. Sometimes it takes several minutes of fiddling around to get cleated in. I know that this is not the norm, having watched thousands of people cleat in their pedals in a matter of seconds at the start of a century.

So, my question is: what is the dang secret to cleating into your pedals**********

Thank you,

Jason
Jason Curtiss is offline  
Old 08-14-05, 04:26 PM
  #2  
But Getting Smaller
 
Bigmark's Avatar
 
Join Date: May 2005
Location: Boardman Ohio
Posts: 235

Bikes: 05 Gary Fisher Tiburon S

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Practice. I found the same problem, but as time goes on, it is getting better.
Bigmark is offline  
Old 08-14-05, 04:29 PM
  #3  
Junior Member
 
Join Date: May 2004
Location: Lake Charles, LA
Posts: 22

Bikes: Trek, Cannondale

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
It will become natural with time.

KS
ksheuk is offline  
Old 08-14-05, 05:06 PM
  #4  
Member
 
Join Date: Aug 2005
Location: Michigan
Posts: 27
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
There is no secret, man. Practice, practice, and once again practice. Be patient - in a few weeks it will disapear from your problem list.
HooKooEKoo is offline  
Old 08-14-05, 07:43 PM
  #5  
la vache fantôme
 
phantomcow2's Avatar
 
Join Date: Aug 2004
Location: NH
Posts: 6,266
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time in 1 Post
just keep riding them, you will discover the secret
__________________
C://dos
C://dos.run
run.dos.run
phantomcow2 is offline  
Old 08-15-05, 06:32 AM
  #6  
Giggity giggity giggity.
 
crb189's Avatar
 
Join Date: Aug 2005
Location: State College, PA
Posts: 51

Bikes: Motobecane le Champion SL, Iron Horse Intrepid

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
PRACTICE. Also, I found it was easier to clip in when I took my time clipping in rather than trying to clip in as fast as I could. It was worth an extra 0.5 seconds to take my time, as opposed to trying 5 times to clip in.
crb189 is offline  
Old 08-15-05, 08:52 AM
  #7  
Senior Member
Thread Starter
 
Jason Curtiss's Avatar
 
Join Date: Jul 2005
Location: Houston, Texas
Posts: 144

Bikes: Bianchi Intenso

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Ok, thanks for the feedback.

I have a hard time knowing how far left/right and forward/aft I should move my foot in order to align the cleat with the pedal. Moreover, the pedal receptacle is a pretty small target.

But I'll keep practicing.


Jason
Jason Curtiss is offline  
Old 08-15-05, 08:57 AM
  #8  
Unique Vintage Steel
 
cuda2k's Avatar
 
Join Date: May 2005
Location: Allen, TX
Posts: 11,590

Bikes: Kirk Frameworks JKS-C, Serotta Nova, Gazelle AB-Frame, Fuji Team Issue, Surly Straggler

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 57 Post(s)
Liked 225 Times in 56 Posts
Reducing the tension screw on the cleats for the first few weeks and slowly upping the tension as you get comfortable till you find a tension you want to keep with is the route I've been going with my clipless pedals. Each week I go about a half turn tighter on the tension and think after next week I should have a good balance of resistance to accidental disengagement and ease of entry.

Good luck with clipless - I've been loving mine and just bought a second pair of pedals for my other bike.
cuda2k is offline  
Old 08-15-05, 09:54 AM
  #9  
No Rocket Surgeon
 
eubi's Avatar
 
Join Date: Jan 2005
Location: Corona and S. El Monte, CA
Posts: 1,648

Bikes: Cannondale D600, Dahon Speed T7

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 6 Times in 1 Post
A little bit of lubricant won't hurt either.

Something that won't crud up. I use graphite or White Lightning.
eubi is offline  
Old 08-15-05, 10:50 AM
  #10  
hello
 
roadfix's Avatar
 
Join Date: May 2003
Location: Los Angeles
Posts: 18,675
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Liked 100 Times in 43 Posts
Practice clicking in and out of both feet (not at the same time obviously) so you can click out of either foot instinctively as the situation calls for when coming to a stop. You'll thank me later.....

Last edited by roadfix; 08-15-05 at 11:20 AM.
roadfix is offline  
Old 08-15-05, 11:13 AM
  #11  
cab horn
 
Join Date: Jun 2004
Location: Toronto
Posts: 28,353

Bikes: 1987 Bianchi Campione

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 25 Times in 18 Posts
It's unClipping not uncleating.
operator is offline  
Old 08-15-05, 11:33 AM
  #12  
Conquer Cancer rider
 
Boudicca's Avatar
 
Join Date: Sep 2004
Location: Toronto
Posts: 6,039

Bikes: Fun bike, city bike, Bike Friday, Brompton (also fun bikes)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Sometimes it helps to almost stand on the pedal you are trying to clip in on for a split second. And you also push forward a little as you tread down. It usually works, although sometimes you sort of skate around on the pedal for a bit until you find precisely the right angle.
__________________
Zero gallons to the mile
Boudicca is offline  
Old 08-15-05, 02:54 PM
  #13  
Buddha Khan
 
Join Date: Sep 2004
Posts: 444
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
If it's taking you a long time for your foot to hunt for the pedal location, you might also try moving the cleat back/forth and/or your saddle back/forth so that when you step on the pedals, your feet are naturally where the cleats will interface the pedals.
meme is offline  
Old 08-15-05, 04:27 PM
  #14  
@#$% cars
 
Join Date: Jun 2004
Location: Chicago
Posts: 405

Bikes: '02 Schwinn Frontier;'03 Fisher Tiburon; '04 Raleigh Companion; 04 Dahon SpeedPro; 69 Raleigh Sport fixed

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
What kind of pedals? I've been using regular spd pedals on a couple bikes ... everything was great. I added "campus pedals" to my Singlespeed run-around so I could use clips when I wanted or regular shoes. All of a sudden I just couldn't get my right foot in. Turned out that my mountain bike shoe's tread was interfering with the clip-in. I have an older pair of shoes w/ less intense tread that work just great. I think this would only be an issue with the campus pedal (which has a cage around the spd part).

So, if practice and moving the cleat around don't help. Maybe, just maybe, you need to trim a little more tread from near your cleat on the shoe.
hubs is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.