Bike cleaning and lubing.
#1
Senior Member
Thread Starter
Bike cleaning and lubing questions.
My UO-8 has gotten fairly dirty and also needs to be greased.
So my questions are, can I just use regular car wash soap?
and
What's a cheap lube that I can use? I don't want the best just something that is cheap, works fairly well and will not damage my bike.
So my questions are, can I just use regular car wash soap?
and
What's a cheap lube that I can use? I don't want the best just something that is cheap, works fairly well and will not damage my bike.
#2
Senior Member
Thread Starter
Can anyone at least give me answer on the cleaning right now?
I don't want a demanding tone but I'd like to know right now if I can:
1. Use normal auto wash on it.
2. if there's anything that can't get wet
3. if I can just wash off the grease now and re-lube it.
I don't want a demanding tone but I'd like to know right now if I can:
1. Use normal auto wash on it.
2. if there's anything that can't get wet
3. if I can just wash off the grease now and re-lube it.
#3
Occasional poster
Here's my two cents.
Many swear by Simple Green as an overall cleaner. Don't use high pressure water. Get an old toothbrush. Clean the cogs with the simple green, rinse with water. In fact, you can wash the entire bike - use some common sense, don't wash too vigorously. After you have washed it, rub it dry. Let the chain and cogs dry for a bit (maybe a couple of hours). Go to your LBS and have them recommend a chain lube. I am currently using something call BikeLube (catchy eh?)
Good luck
Many swear by Simple Green as an overall cleaner. Don't use high pressure water. Get an old toothbrush. Clean the cogs with the simple green, rinse with water. In fact, you can wash the entire bike - use some common sense, don't wash too vigorously. After you have washed it, rub it dry. Let the chain and cogs dry for a bit (maybe a couple of hours). Go to your LBS and have them recommend a chain lube. I am currently using something call BikeLube (catchy eh?)
Good luck
#4
Senior Member
Join Date: May 2005
Location: Plymouth, MA
Posts: 108
Bikes: Trek 820 mtb, DeVinci Podium
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
yea, car wash or some dish detergent to give you sudsy warm water should be fine - simple green or a citrus solvent may cut the lube on the chain a little better. A wet or dry bike lube, based on your riding - and I've been ok using 3-in-1 oil which has a neat applicator tip. So after dry - try to get a drop (no more) of oil on the moving parts - front & rear derailliers and cables. A small drop strategically placed in each chain link, run thru all the gears, and take the bike for a 3 min ride down the street running thru all the gears. My bike is so freaking quiet after I do this!
Good luck / Peter
Good luck / Peter
#6
I ride red bikes
Join Date: Jul 2006
Location: San Francisco, CA
Posts: 154
Bikes: 2007 Trek 1500 (red), 1994 Performance X203 (red)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'd suggest not skimping on the lube - ProLink does a much better job than household 3-in-1 oil, and you can afford six bucks to make your bike run better than ever before, right?
#7
Senior Member
Thread Starter
Originally Posted by jimples
I'd suggest not skimping on the lube - ProLink does a much better job than household 3-in-1 oil, and you can afford six bucks to make your bike run better than ever before, right?
Also, I'm having some trouble getting the chain off, looked it over for a long time and couldn't find the master link.
#9
Ride the Road
Join Date: Jan 2004
Location: Columbus, Ohio
Posts: 4,059
Bikes: Surly Cross-Check; hard tail MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 5 Times
in
3 Posts
I use dish soap (Dawn or the like) and it does just fine for the frame. I use OranjPeelz on greasy components. Even "expensive" lube is cheap when you think about how long a can/bottle will last. Just be sure to wait until the chain is completely dry before lubing.
Beware, unless you are good at it (I'm a clutz), you can damage your chain when you start messing with links. Think about replacing the chain. If you are feeling adventurous and flush with cash, check for wear on the cassette and consider replacing it if needed (but that gets expensive and requires at least two tools many people don't have).
Edit: As to equipment, I just use rags, a toothbrush, and a bigger plastic-bristled brush that I got at a hardware store.
Beware, unless you are good at it (I'm a clutz), you can damage your chain when you start messing with links. Think about replacing the chain. If you are feeling adventurous and flush with cash, check for wear on the cassette and consider replacing it if needed (but that gets expensive and requires at least two tools many people don't have).
Edit: As to equipment, I just use rags, a toothbrush, and a bigger plastic-bristled brush that I got at a hardware store.
Last edited by Daily Commute; 09-03-06 at 11:11 AM.
#10
Senior Member
Join Date: Mar 2006
Posts: 155
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Another vote for Simple Green and toothbrush. Actually I use a grout cleaner brush, it's a little bigger than a toothbrush. It seems to do the quickest job
#11
Senior Member
Join Date: Jan 2005
Location: Illinois
Posts: 1,015
Bikes: 2004 Raliegh Retro Glide 7(green of course), 2005 Stingray Pea Picker 2005 Specialized Hardrock 2014 Trek Crossfit
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I always use Finish Line products!
Echo-Tech degreaser, Pro Detailer, and Dry Teflon Lube(I don't ride in wet conditions & it attracks less dirt)
https://www.finishlineusa.com/
They also have a Chain Cleaner which I love. Does a great job on the chain without having to remove it
I would never use 3 in 1 oil, it will attract every piece of dirt within a 3ft radius
Echo-Tech degreaser, Pro Detailer, and Dry Teflon Lube(I don't ride in wet conditions & it attracks less dirt)
https://www.finishlineusa.com/
They also have a Chain Cleaner which I love. Does a great job on the chain without having to remove it
I would never use 3 in 1 oil, it will attract every piece of dirt within a 3ft radius
__________________
We're gonna have the hap, hap, happiest Christmas since Bing Crosby tap-danced with Danny ****ing Kaye.~Clark Griswold
We're gonna have the hap, hap, happiest Christmas since Bing Crosby tap-danced with Danny ****ing Kaye.~Clark Griswold
#12
Time for a change.
Join Date: Jan 2004
Location: 6 miles inland from the coast of Sussex, in the South East of England
Posts: 19,913
Bikes: Dale MT2000. Bianchi FS920 Kona Explosif. Giant TCR C. Boreas Ignis. Pinarello Fp Uno.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
I ride a mountain bike and after every Ride it is de-gunk and lube time. I use a product called "MuckOff" to get rid of the mud and oil that is on the bike but car wash shampoo and a sponge will work aswell. After hosing down and ensuring that all the crud is off the bike- I spray the whole bike except the wheels, saddle, Brake blocks and anything rubber, with WD40 or similar water dispellant spray. The bike can then be left for a couple of hours- or days if necessary, before wiping the bike clean and lubing the cables and chain.
Lube wars start on what is the best chain lube but your LBS will recommend one for you. Chain lube is not expensive, but use a chain specific lube.
Lube wars start on what is the best chain lube but your LBS will recommend one for you. Chain lube is not expensive, but use a chain specific lube.
__________________
How long was I in the army? Five foot seven.
Spike Milligan
How long was I in the army? Five foot seven.
Spike Milligan
#13
Newbie
Join Date: Sep 2006
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by countrydirt
Here's my two cents.
Don't use high pressure water. Get an old toothbrush.
Don't use high pressure water. Get an old toothbrush.
#15
Telecommunication
Join Date: Mar 2005
Location: Fort Payne, AL
Posts: 604
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I dunno how much sense it takes to realize it's a bad idea to use pressure washers on a bicycle or just about anything. They are useful for cleaning driveways, decks, siding. I wouldn't even touch my car with one, ask a pro detailer what the best method for cleaning most anything is. Low pressure water and the right cleaning products! I don't even use a jet spray from a regular garden sprayer.