Schwinn Avenue help
#1
Newbie
Thread Starter
Join Date: Feb 2010
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Schwinn Avenue help
Bought this awhile back but need to replace a crank arm. Looking to buy a crank removal tool w/ handle but unsure if its square-tapered-- I guess I should just buy a universal wrench for this?
anyone know the size and/or offset on the stock arms and should i just replace both while I am at it?
used mostly for on-road riding and getting the shepherd his miles in.
just an fyi, I somehow stripped out the crank arm/pedal when riding. I didnt think I cross-threaded the bolt but i guess I did. Had to walk the bike back when I was at my farthest point from home. thats when it broke of course.
suggestions appreciated on all of the above as well as what type pedals would be good replacements. (both the arm and pedal are stripped)
anyone know the size and/or offset on the stock arms and should i just replace both while I am at it?
used mostly for on-road riding and getting the shepherd his miles in.
just an fyi, I somehow stripped out the crank arm/pedal when riding. I didnt think I cross-threaded the bolt but i guess I did. Had to walk the bike back when I was at my farthest point from home. thats when it broke of course.
suggestions appreciated on all of the above as well as what type pedals would be good replacements. (both the arm and pedal are stripped)
#2
Senior Member
Join Date: Sep 2001
Location: Montreal
Posts: 6,521
Bikes: Peugeot Hybrid, Minelli Hybrid
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Your bike will have a square taperspindle. https://www.nashbar.com/bikes/Product...2_10000_201508 Take your old cranks to the shop for replacement. The offset of cranks varies.
#3
Newbie
Thread Starter
Join Date: Feb 2010
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Your bike will have a square taperspindle. https://www.nashbar.com/bikes/Product...2_10000_201508 Take your old cranks to the shop for replacement. The offset of cranks varies.
was looking to order online. any way to tell and must 2 new arms be the same offset as the previous?
Thread
Thread Starter
Forum
Replies
Last Post
libastral
Beach Cruisers
5
06-26-13 08:08 PM