Is it worth it?
10-31-11, 08:33 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2011
Posts: 391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Is it worth it?
Is it worth it to change the two derailleurs, shifters, cassette etc instead of buying a new bike for around $500? Was thinking about Shimano deore parts. Trying to save some money.
10-31-11, 08:47 PM
#2
Banned
Join Date: May 2011
Location: Northern California
Posts: 5,804
Bikes: Raleigh Grand Prix, Giant Innova, Nishiki Sebring, Trek 7.5FX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
10-31-11, 08:51 PM
#3
Senior Member
Join Date: May 2011
Location: N Central Illinois
Posts: 1,288
Bikes: 12 Bianchi Oltre VDCM,11 Bianchi Cavaria, 13 Bianchi Cavaria,12 Bianchi infinito, couple vintage Bianchi's and a 1980 alan super record
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I would think it depends at what price you can get replacement parts? Did you try google, ebay as a starting search? All of the parts you desire are out there.
10-31-11, 11:23 PM
#4
Senior Member
^^^ It's also going to depend on the value of the frame and existing wheels.
__________________
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
11-01-11, 04:08 AM
#5
Senior Member
Join Date: Feb 2009
Location: Dorset, SW England, United Kingdom
Posts: 425
Bikes: Heavily modded Cannondale Hooligan 1 (2009) and an upgraded Raleigh Max Zero-G
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I did this to a bike of mine, while I wasn't to fussy about parts - I upgraded a 24 speed to a 27 speed because it ended up being cheaper (well marginally more expensive short term, but cheaper long term due to other parts wearing out/failing) to replace the entire drive train (chainwheels, cranks, cassette, f/r dérailleurs, chain and shifters) than to get the obsolete replacement part I needed.
It all depends on how much you value the rest of the bike, and what deals you can get on the bits - I got some very good deals of a well known auction site and a rummage (reduced price) bin in a local chain store.
It all depends on how much you value the rest of the bike, and what deals you can get on the bits - I got some very good deals of a well known auction site and a rummage (reduced price) bin in a local chain store.
11-01-11, 04:43 AM
#6
Senior Member
Join Date: Apr 2010
Location: Warwick, UK
Posts: 1,049
Bikes: 2000-something 3 speed commuter, 1990-something Raleigh Scorpion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Personally, I wouldn't bother unless the parts are already worn out. Chainrings tend to last a bit longer than cassettes, which in turn tend to last longer than chains. Just replace parts as they wear, unless you're looking specifically to change the setup. BTW, a derailleur will generally shift whatever number of sprockets you ask it to as long as the cable pull is compatible with that of the shifter, so there probably won't be a need to replace that even if you're changing the sprocket count.
Some good reference articles here:
https://sheldonbrown.com/speeds.html
https://sheldonbrown.com/cribsheet-spacing.html
Some good reference articles here:
https://sheldonbrown.com/speeds.html
https://sheldonbrown.com/cribsheet-spacing.html
11-01-11, 04:54 AM
#7
Banned
Join Date: Nov 2004
Posts: 10,082
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
11-01-11, 12:37 PM
#8
Senior Member
Join Date: Oct 2009
Location: Phoenix, Arizona
Posts: 684
Bikes: Elephant custom road bike, 08 Redline D440, Motobecane Fantom cross Uno.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What is wrong with the components you have now?
11-01-11, 01:12 PM
#9
Banned.
Join Date: Dec 2005
Location: Upland Ca
Posts: 19,895
Bikes: Lemond Chambery/Cannondale R-900/Trek 8000 MTB/Burley Duet tandem
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
Is it worth it? Not even worth responding in this thread if the OP is not going to give more info or respond himself.
11-01-11, 02:33 PM
#10
Senior Member
Thread Starter
Join Date: Sep 2011
Posts: 391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
11-01-11, 02:34 PM
#11
Senior Member
Thread Starter
Join Date: Sep 2011
Posts: 391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
11-01-11, 02:35 PM
#12
Senior Member
Thread Starter
Join Date: Sep 2011
Posts: 391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
11-01-11, 02:36 PM
#13
Banned
Join Date: May 2011
Location: Northern California
Posts: 5,804
Bikes: Raleigh Grand Prix, Giant Innova, Nishiki Sebring, Trek 7.5FX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
11-01-11, 02:38 PM
#14
Senior Member
Thread Starter
Join Date: Sep 2011
Posts: 391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Personally, I wouldn't bother unless the parts are already worn out. Chainrings tend to last a bit longer than cassettes, which in turn tend to last longer than chains. Just replace parts as they wear, unless you're looking specifically to change the setup. BTW, a derailleur will generally shift whatever number of sprockets you ask it to as long as the cable pull is compatible with that of the shifter, so there probably won't be a need to replace that even if you're changing the sprocket count.
Some good reference articles here:
https://sheldonbrown.com/speeds.html
https://sheldonbrown.com/cribsheet-spacing.html
Some good reference articles here:
https://sheldonbrown.com/speeds.html
https://sheldonbrown.com/cribsheet-spacing.html
11-01-11, 02:39 PM
#15
Senior Member
Thread Starter
Join Date: Sep 2011
Posts: 391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
11-01-11, 02:41 PM
#16
Senior Member
Thread Starter
Join Date: Sep 2011
Posts: 391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
11-01-11, 02:43 PM
#17
Senior Member
Thread Starter
Join Date: Sep 2011
Posts: 391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Well, if I upgrade some of the components. The new components may not be compatible with the old one etc. The current components on the bike are still in fair conditions.
11-01-11, 02:49 PM
#18
Senior Member
Thread Starter
Join Date: Sep 2011
Posts: 391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Pricepoint has a SRAM X7 build kit for $239.98. That's a hard to beat deal. https://www.pricepoint.com/detail/192...d-Kit-2010.htm
How does it compare with Shimano Deore?
Sorry, but I'm still kind of new to bike components etc.
11-01-11, 02:54 PM
#19
Banned
Join Date: Nov 2004
Posts: 10,082
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
A few years ago I switched from Shimano XT to SRAM X7 and preferred the shifting on the X7. Like all things others will have a differing opinion, but I really like SRAM components.
11-01-11, 02:56 PM
#20
Pedaled too far.
Join Date: Oct 2005
Location: La Petite Roche
Posts: 12,851
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
And it depends on how much you love the bike for it's own sweet self.
__________________
"He who serves all, best serves himself" Jack London
11-01-11, 03:04 PM
#21
Banned
Join Date: May 2011
Location: Northern California
Posts: 5,804
Bikes: Raleigh Grand Prix, Giant Innova, Nishiki Sebring, Trek 7.5FX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hey there ChowChow!
If I were you, I'd dismantle the bike and have it powder-coated. Next, I'd get my wheels nice and shiny (like new). I'd replace the casette, the derailleurs, the chain, and the shifters, all at one time. If on a budget, I would wait to replace the handlebars, stem, seat, and seat post. Perhaps, one per month or so.
When you're done, it will be like new! It would have also been a lot of fun!
That's the greatest thing about chromoly, you don't have to worry about your bike pooping out on you, just after doing a bunch of upgrades! You'll essentially have a brand new bike!
- Slim
PS.
Go for it!
If I were you, I'd dismantle the bike and have it powder-coated. Next, I'd get my wheels nice and shiny (like new). I'd replace the casette, the derailleurs, the chain, and the shifters, all at one time. If on a budget, I would wait to replace the handlebars, stem, seat, and seat post. Perhaps, one per month or so.
When you're done, it will be like new! It would have also been a lot of fun!
That's the greatest thing about chromoly, you don't have to worry about your bike pooping out on you, just after doing a bunch of upgrades! You'll essentially have a brand new bike!
- Slim
PS.
Go for it!
11-01-11, 03:11 PM
#22
Senior Member
Thread Starter
Join Date: Sep 2011
Posts: 391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hey there ChowChow!
If I were you, I'd dismantle the bike and have it powder-coated. Next, I'd get my wheels nice and shiny (like new). I'd replace the casette, the derailleurs, the chain, and the shifters, all at one time. If on a budget, I would wait to replace the handlebars, stem, seat, and seat post. Perhaps, one per month or so.
When you're done, it will be like new! It would have also been a lot of fun!
That's the greatest thing about chromoly, you don't have to worry about your bike pooping out on you, just after doing a bunch of upgrades! You'll essentially have a brand new bike!
- Slim
PS.
Go for it!
If I were you, I'd dismantle the bike and have it powder-coated. Next, I'd get my wheels nice and shiny (like new). I'd replace the casette, the derailleurs, the chain, and the shifters, all at one time. If on a budget, I would wait to replace the handlebars, stem, seat, and seat post. Perhaps, one per month or so.
When you're done, it will be like new! It would have also been a lot of fun!
That's the greatest thing about chromoly, you don't have to worry about your bike pooping out on you, just after doing a bunch of upgrades! You'll essentially have a brand new bike!
- Slim
PS.
Go for it!
https://forums.mtbr.com/vintage-retro...ra-390939.html
You'll have to scroll down a bit to see how it turned out.
11-01-11, 03:31 PM
#23
Banned
Join Date: May 2011
Location: Northern California
Posts: 5,804
Bikes: Raleigh Grand Prix, Giant Innova, Nishiki Sebring, Trek 7.5FX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I really like what this guy did to his 1987 Schwinn Sierra. I got the exact same one. With the same colors etc too.
https://forums.mtbr.com/vintage-retro...ra-390939.html
You'll have to scroll down a bit to see how it turned out.
https://forums.mtbr.com/vintage-retro...ra-390939.html
You'll have to scroll down a bit to see how it turned out.
How's the paint holding up on yours?...Does it look anything close to that vintage-retro-classic Sierra we linked?
- Slim
11-01-11, 03:34 PM
#24
Senior Member
Thread Starter
Join Date: Sep 2011
Posts: 391
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
11-01-11, 03:50 PM
#25
Banned
Join Date: May 2011
Location: Northern California
Posts: 5,804
Bikes: Raleigh Grand Prix, Giant Innova, Nishiki Sebring, Trek 7.5FX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If I were you, I couldn't wait to get started!...Man!...Are you LUCKY!
That means you can just skip the paint-job altogether, and go straight for the upgrades....
- Slim