How to measure quill stem?
What is the proper way to measure the stem and/or fork?
My bike is a cross between a 1997 Trek 850 and 1997 Trek 930, each had different size forks/stems, so I'm not sure which mine has without measuring. |
I use calipers and measure just above the nut that holds the fork assembly together. Or you can go to Bikepedia...
The 850 has a 1" and the 930 has the 1-1/8" "oversized". FWIW I measure my stuff. Aaron :) |
Are we talking about quill stems? Isn't it different by manufacturer, if not by cyclist? For non-quill, isn't it axis to axis?
|
Originally Posted by wahoonc
(Post 13702461)
I use calipers and measure just above the nut that holds the fork assembly together. Or you can go to Bikepedia...
The 850 has a 1" and the 930 has the 1-1/8" "oversized". FWIW I measure my stuff. Aaron :) Will find a set of calipers and measure tomorrow. Thanks! |
Originally Posted by nrowensby
(Post 13702772)
I know the 930 and 850 have different size forks, that's why I wasn't sure which the VW Jetta bike has... :)
Will find a set of calipers and measure tomorrow. Thanks! Aaron :) |
Originally Posted by wahoonc
(Post 13702844)
You can use an adjustable wrench and a tape measure in a pinch.
Aaron :) |
So what did you find out?
Is it going to fit or ?? Aaron :) |
I haven't bought anything yet... Measure first, then buy. :)
|
Originally Posted by nrowensby
(Post 13707605)
I haven't bought anything yet... Measure first, then buy. :)
Aaron :) |
All times are GMT -6. The time now is 04:32 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.