Comfy seat suggestions for mantis ghost 26" mountain bike
#1
Senior Member
Thread Starter
Join Date: May 2012
Posts: 91
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Comfy seat suggestions for mantis ghost 26" mountain bike
I just recently purchased a 26" men's Mantis Ghost mountain bike. Less than 2 minutes of riding it I realized that the seat was going to have to go. It causes too much pain and stress on my bottom and lower back to enjoy riding. I am 25 years old and 190 pounds. I was looking online and this seat looks to be pretty comfy, but what say you?
https://assets.academy.com/mgen/88/10...jpg?is=500,500
Also does anyone have any suggestions for a comfortable seat? I mostly ride the bike on the road and hardly ever on any other terrain. I need a seat that is good for long riding. Let me know what you suggest. My price range is for now up to $25.
edit: Here is a pic of my bike.
https://assets.academy.com/mgen/88/10...jpg?is=500,500
Also does anyone have any suggestions for a comfortable seat? I mostly ride the bike on the road and hardly ever on any other terrain. I need a seat that is good for long riding. Let me know what you suggest. My price range is for now up to $25.
edit: Here is a pic of my bike.
Last edited by casey86; 05-16-12 at 04:02 PM. Reason: left out some info.
#2
Senior Member
Join Date: Jun 2010
Location: Las Vegas
Posts: 346
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked 0 Times
in
0 Posts
Many people don't realize it,but pressing against the nose of the seat is part of how you control the bike. A noseless seat may be ok for an upright cruiser, but not your bike. For $25 you can check Craigslist or maybe here: https://www.themountainbikeking.com/S...46_982402.aspx But honestly I would say save your money and put it towards a better bike.
#3
Senior Member
Thread Starter
Join Date: May 2012
Posts: 91
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Many people don't realize it,but pressing against the nose of the seat is part of how you control the bike. A noseless seat may be ok for an upright cruiser, but not your bike. For $25 you can check Craigslist or maybe here: https://www.themountainbikeking.com/S...46_982402.aspx But honestly I would say save your money and put it towards a better bike.
#4
Carpe Velo
Join Date: Dec 2011
Location: Fort Worth, Texas
Posts: 2,519
Bikes: 2000 Bianchi Veloce, '88 Schwinn Prologue, '90 Bianchi Volpe,'94 Yokota Grizzly Peak, Yokota Enterprise, '16 Diamondback Haanjo, '91 Bianchi Boardwalk, Ellsworth cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 14 Times
in
13 Posts
I'm a fan of leather Brooks saddles, but you can't touch even a heavily used one for $25. I have a bin of cheap to modestly priced takeoffs at home. If you want to try a couple, I can send several to you if you'll cover the shipping. At least one of them is a pretty decent Bontrager than came off the Tandem I just bought from mymojo.
#5
Senior Member
Join Date: Jan 2012
Location: Spokane, WA
Posts: 2,243
Bikes: Specialized Sequoia Elite/Motobecane Fantom Cross Team Ti/'85 Trek 520
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
In general, any bike that costs under 400-500 dollars new are bikes that you would find at places like walmart/target/toys r us/etc. They usually have components that are heavier and not as well made as local bike shop bikes. And on top of that, to get a full suspension bike that performs very well, you generally need to spend upwards of 1200-1300 dollars or more. A used '90s era hard tail or rigid mountain bike that was originally bought at a bike shop that has been refurbished is usuaully a much better choice of bike than a new Walmart bike to put it bluntly. Something like a Specialized/Trek/Diamondback/Fuji.
Your seat also looks too low and looks like the front of it is tilted up too high. Raise the seat and tilt the nose of it down.
Your seat also looks too low and looks like the front of it is tilted up too high. Raise the seat and tilt the nose of it down.
#6
Senior Member
Join Date: Jun 2010
Location: Las Vegas
Posts: 346
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked 0 Times
in
0 Posts
I'm a fan of leather Brooks saddles, but you can't touch even a heavily used one for $25. I have a bin of cheap to modestly priced takeoffs at home. If you want to try a couple, I can send several to you if you'll cover the shipping. At least one of them is a pretty decent Bontrager than came off the Tandem I just bought from mymojo.
#7
Senior Member
Thread Starter
Join Date: May 2012
Posts: 91
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The bike is heavy at 40 pounds. The frame feels very durable and for the most part it looks like it will last awhile. I have had to do some work on it since purchase a couple weeks ago. I had to have both pedals welded back on to the crank arms because both the crank arm and pedal screw in place stripped out after riding it the second time. I figured since I would need to replace the pedals and crank arms, I may as well just weld them on which worked. The tires came half inflated and so I had to buy a tire pump for that. I bought it off the Amazon online store for $125 and assembled it myself. It will do for what I bought it for. I just would like a more comfortable seat. I have read a lot of good reviews about the seat I linked to above. Some complain about the thighs rubbing up against it while pedaling. I just would like to know if that seat is worth it as far as butt comfort goes.
#8
Senior Member
Join Date: Jun 2010
Location: Las Vegas
Posts: 346
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked 0 Times
in
0 Posts
I view suspension as three categories: comfort, which includes short travel elastomer forks, suspension seatpost, and sprung saddles, which is just meant to soften the bumps and dampen road vibration; big hit suspension, which lets you take drops and impacts that you and/or the bike couldn't take otherwise; and crappy suspension, which has too much sag and bounce to be comfort suspension, and bottoms out to easily and isn't strong enough for a big hit.
I have two big issues with your bike:
1. I would be very worried about quality control. I rode a Next bike from Walmart that was similar to that for about a year before a pedal broke, which at my weight was understand but, the crank arm bent and when I dropped my weight on to the handlebars the stem shattered. There are cheap bikes and there are dangerous bike shaped objects. I'm not familiar with your bike and don't know who the manufacturer is, but please don't take any chances; a bike from an established reputable company can be had pretty cheap. Even Pacific has hire standards then a lot of cheap generic brands.
2. Your bike has crappy suspension.
There is probably a bolt or threaded plate that you can use to adjust the preload for the rear shock. Tightening it to compress the spring more will probably help for road riding.
#9
Senior Member
Join Date: Jun 2010
Location: Las Vegas
Posts: 346
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked 0 Times
in
0 Posts
I've used that very seat. Keep in mind that the rails on the seat and clamp on the post limit how far back you can move the seat, and with this seat that will mean the wider portion will be farther forward than with most seats. On some bikes it feels like the seat is just to far forward. If you're riding very upright, and you can get the seat back far enough, then, once you get used to the difference in handling, it's actually very comfortable, for rides under 10 miles.
#10
Senior Member
Thread Starter
Join Date: May 2012
Posts: 91
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Cycle Force Group made my bike. I guess I really should have read up on what to look for in a bike before buying one. I was honestly just pulling up all the bikes in my price range and picked the one that looked the coolest. >_<
Well, I don't have the money to buy a new bike and not sure what I could get for this one or even where I could trade it in or sell it at around here which is a pretty rural area. Not to mention the pedals have been welded on to the crank arms because they stripped out. For now this bike will have to do. I will go ahead and invest in a new seat as I can always put that on a new bike any time. Comfort is my top priority right now and since the seat is really only I can buy right now I want to be sure I get a good one though I am not looking to spend a lot and I would sure want something more comfortable for more than 10 miles. I'd like a seat that covers the entire bottom butt area so it feels like a chair seat and not a thing block I am sitting on.
Well, I don't have the money to buy a new bike and not sure what I could get for this one or even where I could trade it in or sell it at around here which is a pretty rural area. Not to mention the pedals have been welded on to the crank arms because they stripped out. For now this bike will have to do. I will go ahead and invest in a new seat as I can always put that on a new bike any time. Comfort is my top priority right now and since the seat is really only I can buy right now I want to be sure I get a good one though I am not looking to spend a lot and I would sure want something more comfortable for more than 10 miles. I'd like a seat that covers the entire bottom butt area so it feels like a chair seat and not a thing block I am sitting on.
#11
Senior Member
Join Date: Jun 2010
Location: Las Vegas
Posts: 346
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Liked 0 Times
in
0 Posts
#12
Carpe Velo
Join Date: Dec 2011
Location: Fort Worth, Texas
Posts: 2,519
Bikes: 2000 Bianchi Veloce, '88 Schwinn Prologue, '90 Bianchi Volpe,'94 Yokota Grizzly Peak, Yokota Enterprise, '16 Diamondback Haanjo, '91 Bianchi Boardwalk, Ellsworth cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 14 Times
in
13 Posts
Several of the takeoffs I have are like that. I hate them myself, and have no intention of using them. I see you are under 50 posts, so you can't PM yet, but you can receive them. I will PM you my email address if you want to get in touch with me to get it.
#13
Senior Member
Join Date: Jun 2007
Location: Pittsburgh, PA
Posts: 352
Bikes: BiknBrian brand custom 26 inch commuter trekker, Cannondale F600 Single Speeded MTB, Nashbar Cro-Mo CX, some other bikes and parts that could be made into bikes.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
This thread is hilarious.
#14
Senior Member
Thread Starter
Join Date: May 2012
Posts: 91
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I was kind of upset after having ridden the bike only 2 times and less than a mile at that when both pedals stripped out in the crank arms so I just said screw it and had my step dad weld them both on. It did the job but I am already aware I need to have the pedals and crank arms replaced with all metal ones. Right now they are over half plastic.
#15
Senior Member
Thread Starter
Join Date: May 2012
Posts: 91
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm a fan of leather Brooks saddles, but you can't touch even a heavily used one for $25. I have a bin of cheap to modestly priced takeoffs at home. If you want to try a couple, I can send several to you if you'll cover the shipping. At least one of them is a pretty decent Bontrager than came off the Tandem I just bought from mymojo.
#16
Banned
#1, that is a BSO, bicycle shaped object. a Brooks will be more valuable
than the bike its attached to , and its Hard leather..
you will have to both break in the saddle, and your Butt to the saddle
but well cared for the Traditional leather saddle will go with you
as you replace bikes underneath it..
OTOH, there are many decent Gel padded saddles
Serfas is a good brand, that offer
a more pleasant feel, immediately.
Also look at the local Bike Shop, take offs are new saddles the customer
just wanted a different seat when they bought the bike, so dealer took off the original one.
than the bike its attached to , and its Hard leather..
you will have to both break in the saddle, and your Butt to the saddle
but well cared for the Traditional leather saddle will go with you
as you replace bikes underneath it..
OTOH, there are many decent Gel padded saddles
Serfas is a good brand, that offer
a more pleasant feel, immediately.
Also look at the local Bike Shop, take offs are new saddles the customer
just wanted a different seat when they bought the bike, so dealer took off the original one.
Last edited by fietsbob; 05-18-12 at 11:34 AM.
#17
Senior Member
Join Date: Jun 2007
Location: Pittsburgh, PA
Posts: 352
Bikes: BiknBrian brand custom 26 inch commuter trekker, Cannondale F600 Single Speeded MTB, Nashbar Cro-Mo CX, some other bikes and parts that could be made into bikes.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I was kind of upset after having ridden the bike only 2 times and less than a mile at that when both pedals stripped out in the crank arms so I just said screw it and had my step dad weld them both on. It did the job but I am already aware I need to have the pedals and crank arms replaced with all metal ones. Right now they are over half plastic.
#18
Carpe Velo
Join Date: Dec 2011
Location: Fort Worth, Texas
Posts: 2,519
Bikes: 2000 Bianchi Veloce, '88 Schwinn Prologue, '90 Bianchi Volpe,'94 Yokota Grizzly Peak, Yokota Enterprise, '16 Diamondback Haanjo, '91 Bianchi Boardwalk, Ellsworth cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 14 Times
in
13 Posts
A good brand suggestion. I have several serfas saddles on bikes for my wife & daughter. Neither one has complained. They are reasonably priced.
Casey emailed me and I'm going to send him a couple of my takeoffs to see if they work out for him.
Casey emailed me and I'm going to send him a couple of my takeoffs to see if they work out for him.
#19
Senior Member
Thread Starter
Join Date: May 2012
Posts: 91
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yep. Looking forward to the pics if you send them today.
#20
Member
Join Date: Apr 2012
Posts: 47
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use that seat.
$20 at Target.
The nose of the seat between your legs is an important way to control the bike.....Not having it is not dangerous or anything but you will notice your arms will be doing a little more of the work in controlling / steering the bike....especially when one hand is off the handlebars.
Google Amazon for 'Ergonomic Bike Seat' and you will be AMAZED at the variety of seats available.
I love the seat and am relieved that no hard objects are trying to be crammed up my crotch while riding.
Good luck.
#21
Carpe Velo
Join Date: Dec 2011
Location: Fort Worth, Texas
Posts: 2,519
Bikes: 2000 Bianchi Veloce, '88 Schwinn Prologue, '90 Bianchi Volpe,'94 Yokota Grizzly Peak, Yokota Enterprise, '16 Diamondback Haanjo, '91 Bianchi Boardwalk, Ellsworth cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 14 Times
in
13 Posts
Thread
Thread Starter
Forum
Replies
Last Post
kgowen
Clydesdales/Athenas (200+ lb / 91+ kg)
11
06-16-10 01:26 PM