How far should saddle be set back for reach? How far from bars/center of cranks?
#1
Senior Member
Thread Starter
Join Date: Dec 2009
Posts: 771
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
How far should saddle be set back for reach? How far from bars/center of cranks?
I had a pro fit once, but was wondering what other methods and ideas are out there regarding distance of nose of saddle to drop bar tops, and saddle nose set how far behind center of cranks.
Thanks for your thoughts.
Thanks for your thoughts.
#3
Banned
Do the Knee over the pedal spindle when arm is at 9 &3:00 test?
thigh bone length determines that.
Road bike, drop bars? one scheme, elbow against the nose of the saddle..
tip of fingers behind the handle bar nearly touching ..
I find settling on a comfortable reach, I can look straight down the steering axis of the fork.
thigh bone length determines that.
Road bike, drop bars? one scheme, elbow against the nose of the saddle..
tip of fingers behind the handle bar nearly touching ..
I find settling on a comfortable reach, I can look straight down the steering axis of the fork.
Last edited by fietsbob; 08-18-12 at 10:38 AM.
#4
Senior Member
Join Date: Dec 2009
Posts: 4,700
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
https://www.peterwhitecycles.com/fitting.htm
Forget "knee-over-the-pedal":
Forget "knee-over-the-pedal":
Most fitting "systems" specify that some part of your knee be directly over the pedal axle at some alignment of the crank, usually with the pedal forward and the crank horizontal. This is pure nonsense. Imagine two riders, almost identical, but one rider's knees are 1 inch lower than the other's. In other words, the thigh bones of one rider are 1 inch longer than the other, and his lower legs are 1 inch shorter. Everything else about these two riders is identical, including overall height, torso length, arm length and weight. If you position the saddle such that the knee is directly over the pedal axle, the rider with the shorter thighs must have his saddle a little under 1 inch further forward of the other rider. It would be exactly 1 inch if his thigh was horizontal at that pedal position, which it isn't likely to be.
But with the saddle positioned forward, the rider with shorter thighs now has more weight that must be supported by his arms, all because of this arbitrary rule about having your knee over the pedal axle. This makes no sense. What matters is your weight distribution fore and aft, and that's determined by the fore-aft position of the saddle relative to the cranks.
But with the saddle positioned forward, the rider with shorter thighs now has more weight that must be supported by his arms, all because of this arbitrary rule about having your knee over the pedal axle. This makes no sense. What matters is your weight distribution fore and aft, and that's determined by the fore-aft position of the saddle relative to the cranks.
Thread
Thread Starter
Forum
Replies
Last Post
johngwheeler
Road Cycling
12
08-25-17 10:14 AM
Gordy748
Track Cycling: Velodrome Racing and Training Area
4
10-09-12 10:24 PM