will a 700x35 tube fit a 700x38 tire
#1
Senior Member
Thread Starter
Join Date: Jul 2010
Posts: 417
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
will a 700x35 tube fit a 700x38 tire
ok my hybrid has 700 x 35 tires...my wifes has 700 x 38 so can I use the same tube ?? I think my spares are 26" ??
#3
Senior Member
Join Date: Aug 2011
Location: Central Florida
Posts: 126
Bikes: 2011 Trek 8.4 DS
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Most of the tubes I've bought lately have a range of sizes they can be used for just as they do on jbooker82's DS. So I would think you would be able to use your wife's tubes.
#5
Really Old Senior Member
Your 26" tubes aren't going to fit without severe stretch, assuming they are MB size.
There's about 5 different 26" sizes that vary considerably in diameter.
https://sheldonbrown.com/harris/tires...tml#lesscommon
There's about 5 different 26" sizes that vary considerably in diameter.
https://sheldonbrown.com/harris/tires...tml#lesscommon
#6
Senior Member
Thread Starter
Join Date: Jul 2010
Posts: 417
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 41 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Your 26" tubes aren't going to fit without severe stretch, assuming they are MB size.
There's about 5 different 26" sizes that vary considerably in diameter.
https://sheldonbrown.com/harris/tires...tml#lesscommon
There's about 5 different 26" sizes that vary considerably in diameter.
https://sheldonbrown.com/harris/tires...tml#lesscommon
#7
Really Old Senior Member
Yep
#8
S'Cruzer
I broke my own rules and put used tubes that had been in 700x35 tires into a pair of new 700x32's, the tubes were quite stretched out and I had a hard time getting them to stay in the smaller tire. other than that, you can get away with quite a lot. most tubes are designed for a pretty wide range of tire sizes. absolutely critical however, is not using the wrong valve type. a presto valve inner tube should not be used in a rim drilled for shrader valves, and a shrader valve simply won't fit into the hole for a presto.
#10
Really Old Senior Member
Presto?
Try Presta-
Try Presta-
Thread
Thread Starter
Forum
Replies
Last Post
Richard Cranium
Bicycle Mechanics
4
07-01-11 09:24 PM