Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Hybrid Bicycles (https://www.bikeforums.net/hybrid-bicycles/)
-   -   herniated disk neck - switch to hybrid? (https://www.bikeforums.net/hybrid-bicycles/870442-herniated-disk-neck-switch-hybrid.html)

dogwatch 01-31-13 12:52 PM

herniated disk neck - switch to hybrid?
 
I was diagnosed with a herniated disk and other issues in my neck. I currently ride a 2005 carbon synapse. I am considering a Cannondale quick carbon as a way to get more upright. I don't ride with a group anymore, so performance isn't that big of an issue. I just need to get back on a bike... any bike.

Do you think there would be enough difference in geometry to make a difference (quick vs synapse) to help the neck issues?

Thanks for any insight.

no1mad 01-31-13 01:19 PM

Why not simply just adjust your current bike for a more upright position? Bring the bars up and back a bit and see how that feels before investing in another bike.

Dunbar 01-31-13 01:21 PM

You could test ride it and see. Hybrids tend to stretch you out less and place the bars up higher which will place you more upright. When looking at hybrids make sure the head tube height isn't any smaller than your Synapse if you're worried about your neck. The Synapse has the taller head tube than a road race bike and could probably bet set up the same way as the hybrid (or at least more upright than you have it now.) I would start out with trying to get the bars level with the seat on the Synapse and go up or down from there.

TampaRaleigh 01-31-13 01:28 PM

My wife has the same problem... herniated discs at C4-C5-C6. The more upright geometry worked for her.

I agree with what folks are saying above... try to "modify" yours first. This might be ugly... but give one of these a try:
http://ritcheylogic.com/dimg/thm/t44...ee50683d0d.jpg
Play around with the height adjustments until it feels good... then, if the "look" of the adustable stem bothers you, find a stem/spacer combination that will get your bars in the same spot.

Then you could consider adding an in-line brake lever, to allow you to brake without moving from the flats:
http://www.parktool.com/uploads/imag...ebrake-605.jpg

dogwatch 02-01-13 10:48 AM

Thanks for the replies - i appreciated it.

Good advice - I am going to try an ajustable stem this weekend.

Thanks again!

Pgeters 02-02-13 02:04 AM

6 Attachment(s)
This is probably more radical than you would want to go, but... just in case. My wife has herniated discs and also has bad knees. This is what she is using nowadays. It's a Giant Revive and she loves it. Giant doesn't make it anymore, but they come up on Craigslist all the time around here in the Bay area for around $300 to $400. The combination of the big seat area, the backrest, super adjustability, and the spring suspension are really easy on her back.

I also ride it since it is very adjustable (she is 5'10" and I am 6'2"). You can slide the seat up and down that silver track. Also, the whole handlebar assembly can adjust forward/back and up/down with the one black lever on the side just below the handlebars. Amazing design.

It is also a real conversation starter. She has people asking about it constantly.

And, its got nice 110PSI, 20" Maxxis Hookworm tires on it, so it rolls real nice. Something to keep in mind...

http://farm9.staticflickr.com/8076/8...0a78df06_b.jpg
http://bikeforums.net/attachment.php...hmentid=296723http://bikeforums.net/attachment.php...hmentid=296724http://bikeforums.net/attachment.php...hmentid=296727http://bikeforums.net/attachment.php...hmentid=296726http://bikeforums.net/attachment.php...hmentid=296725http://bikeforums.net/attachment.php...hmentid=296728

pierce 02-02-13 02:51 AM

I'd as soon have a full recumbant like an easy racer....


http://www.easyracers.com/images/Cur...n/FullMain.JPG

or

http://www.easyracers.com/images/Cur...20Rush/Red.JPG


friend of mine rides these. he books some serious mileage on them, he used to be a hard core mountain biker, but his back and neck can't take it anymore.

bjjoondo 02-02-13 09:21 AM


Originally Posted by dogwatch (Post 15220577)
I was diagnosed with a herniated disk and other issues in my neck. I currently ride a 2005 carbon synapse. I am considering a Cannondale quick carbon as a way to get more upright. I don't ride with a group anymore, so performance isn't that big of an issue. I just need to get back on a bike... any bike.

Do you think there would be enough difference in geometry to make a difference (quick vs synapse) to help the neck issues?

Thanks for any insight.

I'd recommend trying a "different angled" stem on your current bike first! My bike came stock with a 120mm 10 degree stem, HATED it!!!:notamused:
I have two forms of arthritis that effect all the major ligs and tendons in the joints, including my neck. I had the LBS put on a 110mm 35 degree stem and that solved the pain problem in my neck for riding. You can get a non-adjustable stem up to 50 degree angle, yes, the LBS will look at you like your from outerspace at first, just cause the "racer boys" gota have 10 degree of less to get LOW but that's NOT what YOU need! JMHO, YMMV.

400trix 02-03-13 11:15 PM

+1 for recumbents. I have had ADCF at C5-C6, and I can't ride a road bike, or even a hybrid for more than 20 minutes or so, but I can ride my Catrike Pocket all day.


All times are GMT -6. The time now is 01:23 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.