what would you do to get onto a 20'' ledge w/ xc bike?
#1
Senior Member
Thread Starter
Join Date: Feb 2006
Location: San Diego, Ca
Posts: 74
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
what would you do to get onto a 20'' ledge w/ xc bike?
There is this newly built bridge by some boy scouts in the local trail. The bridge is about 20'' from the ground and i dunno what is easiest way to get up on it. I was thinking about bunny hopping onto it, but being out of it for a while i decided not to.
Unlike 24'' logs, its hard to just ride over it because of its 90 degree edges....
give me suggestions please.
thanks
Unlike 24'' logs, its hard to just ride over it because of its 90 degree edges....
give me suggestions please.
thanks
#2
Wood Licker
Join Date: Apr 2002
Location: Whistler,BC
Posts: 16,966
Bikes: Trek Fuel EX 8 27.5 +, 2002 Transition Dirtbag, Kona Roast 2002
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
ft and a half...I would probably plant my front wheel and endo onto it enough to pedal up.
#3
Long haired freak.
Join Date: Jun 2005
Location: Still stuck in hell.
Posts: 6,281
Bikes: 2011 SE Old Man Flyer.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I would lift my front wheel onto it, then roll about 2feet, hit front brake and 'stoppie' onto it.
__________________
"the bus came by and I got on, that's when it all began...there was Cowboy Neal at the wheel of a bus to never-ever land."
"the bus came by and I got on, that's when it all began...there was Cowboy Neal at the wheel of a bus to never-ever land."
#4
Hardtail
Join Date: Sep 2004
Location: Az. & Ca.
Posts: 663
Bikes: Richey Everest, Supercomp, Richey custom handbuilt Road, and others.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Drop your seat on approach, at moderate speed Lift front wheel up and on, then plant bottom of forward pedal on ledge and leverage through shift your weight to the planted pedal side and then forward pulling bike with you. Try it caring the bike over your head to get a feel for how much leg power you need then do it with the bike under you.
If you don’t have a bash guard your timing has to be spot on.
If you don’t have a bash guard your timing has to be spot on.
#5
Too Much Crazy
Join Date: Feb 2005
Location: NY
Posts: 3,660
Bikes: Eriksen 29er, Gunnar Roadie, Niner RLT, Niner RIP 9
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 116 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
Definately wheelie the front wheel onto it at moderate speed. I would then completely unweight the rear of the bike and lift it by wieghting the front and pushing the handlebars forward. I would also cheat and use the clipless pedals . Kind of like a bunny hop but your front wheel will contact the bridge first. Then pedal on out of there.
I think speed is key. you have to keep it up.
I have a section like this on a trail I ride a lot. In fact, it is a boyscout bridge also. The toughest part was to try it at a speed where you could make it. The tendancy was to try it going to slow and then you would stall out. Becuase on either side is nasty ass swamp about 5 feet down.
I will say this too, there are probably 4 or5 different techniques that will all work
I think speed is key. you have to keep it up.
I have a section like this on a trail I ride a lot. In fact, it is a boyscout bridge also. The toughest part was to try it at a speed where you could make it. The tendancy was to try it going to slow and then you would stall out. Becuase on either side is nasty ass swamp about 5 feet down.
I will say this too, there are probably 4 or5 different techniques that will all work
Last edited by C Law; 05-05-06 at 11:48 AM.
#6
Throw the stick!!!!
Originally Posted by Maelstrom
ft and a half...I would probably plant my front wheel and endo onto it enough to pedal up.
__________________
I may be fat but I'm slow enough to make up for it.
#8
Wood Licker
Join Date: Apr 2002
Location: Whistler,BC
Posts: 16,966
Bikes: Trek Fuel EX 8 27.5 +, 2002 Transition Dirtbag, Kona Roast 2002
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 23 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Yes..and it isn't, its actually very easy. Unweighting the rear end, imo, is an essential skill inmountain biking
#9
Rollin' the dice
Join Date: Apr 2005
Posts: 31
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I used this description of riding up things and I could clear things over 2 and a half feet high in less than an hour.
Riding Up Objects
Riding Up Objects
#10
Your Local Megalomaniac
Join Date: Mar 2006
Location: Centennial, CO
Posts: 265
Bikes: Gary Fisher GED, ECHO Pure, Norco Moment, Kona Stab
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
A zap-tap.. least thats what your talking about.
Come to the obsticial at a moderate speed, add a 1/4 pedal stroke to raise the front wheel onto the obsticial, (your pedals should be level at this point) unweight the rear wheel and tap the front brake to help you bring the back wheel up.
Little word of advice: Jump up the obsticial, and just bring the bike with you.
Come to the obsticial at a moderate speed, add a 1/4 pedal stroke to raise the front wheel onto the obsticial, (your pedals should be level at this point) unweight the rear wheel and tap the front brake to help you bring the back wheel up.
Little word of advice: Jump up the obsticial, and just bring the bike with you.
#11
Senior Member
Thread Starter
Join Date: Feb 2006
Location: San Diego, Ca
Posts: 74
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
yeah moderate speed is the key unless ur lightening quick at lifting that back end.... i tried it devil speed the first time and there goes my brand new chain ring. after that i did it at moderate speed multiple times, no prob, (espec with clipless)