Does anyone have a SID with Pop Loc ?
07-07-06, 03:41 PM
#1
Senior Member
Thread Starter
Join Date: Nov 2005
Posts: 289
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Does anyone have a SID with Pop Loc ?
Just installed one and I am pretty sure the compression dial on the fork itself that the pop loc cable is attached to is faulty.
It doesn't spring back to open position - in fact there is no spring in it at all. If I do not turn the dial on the fork manually it is in semi lock mode.
The Reba pop loc I have springs back to open pretty firmly when released.
Am I missing something with the SID or do I need to get it replaced as I suspect ?
It doesn't spring back to open position - in fact there is no spring in it at all. If I do not turn the dial on the fork manually it is in semi lock mode.
The Reba pop loc I have springs back to open pretty firmly when released.
Am I missing something with the SID or do I need to get it replaced as I suspect ?
07-08-06, 03:02 AM
#2
Senior Member
Join Date: Jan 2006
Location: Connecticut
Posts: 115
Bikes: Lemond, Klein,Trek
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My SID World Cup pop lock appears to travel properly from locked to unlocked. The dial does not line up to the exact same point for both though. There is about a 1.5mm difference. I cannot move the dial by hand once it's fully locked or unlocked. My pop lock controls both the front and rear shocks which may make a difference, but I can't imagine why.. I hope this helps.
